← Back to your LP12 build

Linn · LP12 upgrades

Linn LP12 Krane Tonearm

$2,050

Signature technologiesThe Linn story

In stock

Not currently in our rooms. For a serious buyer we will often bring a piece in from the manufacturer for a private session — tell us about your system and what you are weighing it against, and we will advise.

Linn · LP12 upgrades

The tonearm of the Majik LP12: a static-balanced arm with a tungsten-and-sapphire vertical bearing, a dual ceramic horizontal bearing and Linn's own geometry, hand-assembled from aluminum and stainless steel, and available in a palette of colors to order.

Tonearm cable not included; uses a Linn 5-pin DIN tonearm cable such as the T-Kable. Fitted as standard to the Majik LP12.

229 mm
effective length, 18 mm overhang, 24° offset
<10 mg
bearing friction (Hi-Fi News lab)
10 g
effective mass (Hi-Fi News lab)
Magnetic
anti-skate

Authorized Linn dealer · Delivery and installation by Pearl Audio · Trade-ins welcome

The story

Krane replaced the Majik arm in 2020 and is built around Linn's specification for effective length and offset angle, so it lines up with every Linn cartridge and every LP12 sub-chassis without adjustment. It is static-balanced and hand-assembled from aluminum and stainless-steel parts. The vertical bearing is polished tungsten on sapphire, the horizontal bearing a dual ceramic assembly; Hi-Fi News measured friction below 10 mg with no perceptible play. A laser-etched scale makes VTA settings repeatable, azimuth is adjustable, the offset angle is fixed, and an adjustable three-point headshell sets the effective length exactly. Anti-skate is a magnetic mechanism on the side of the arm, with no thread or weight to catch. Connection is a 5-pin DIN for a Linn tonearm cable.

Hi-Fi News measured the arm's effective mass at 10 g, which suits the Adikt moving magnet and Koil moving coil Linn fits to the Majik LP12, and most medium-compliance cartridges. Reviewing the Majik LP12/Krane package, the magazine called the arm and cartridge modest parts that let the Sondek perform, in a deck that "makes music sound natural, unforced, easy and yet expressive and emotional," and What Hi-Fi?, testing the MC version with the Koil in 2024, found the presentation "fluid and wonderfully cohesive."

Krane is the first of Linn's three current tonearms, below the Arko of the Selekt LP12 and the Ekos SE of the Klimax. Linn's dealer photography shows it in a palette of twenty-five Pantone colors beyond the standard black, from white and yellow through red, purple, green, teal and blue; ask us about color availability. A tonearm cable is not included; the T-Kable in RCA or XLR is the Linn choice, and we fit and align the arm on our bench.

Each technology below is explained in depth in the Linn technology library; the Linn story follows the company from the first Sondek LP12 in 1973 to Organik and Exakt.

Key technologies

  • Low-friction bearings. Polished tungsten-and-sapphire vertical bearing; dual ceramic horizontal bearing; under 10 mg measured.
  • Linn geometry. Fixed offset angle and adjustable headshell for exact effective length with every Linn cartridge. The deep dive.
  • Repeatable VTA. Laser-etched height scale; azimuth adjustable.
  • Magnetic anti-skate. Side-mounted mechanism with no thread or weight.
  • Color options. Standard black, with Pantone colors available to order.
Specifications
Type Static-balanced pivoted tonearm
Effective length 229 mm
Pivot to spindle 211 mm
Overhang 18 mm
Offset angle 24°
Effective mass 10 g (Hi-Fi News measurement; not published by Linn)
Bearings Tungsten/sapphire vertical; dual ceramic horizontal; friction below 10 mg (Hi-Fi News)
Adjustments VTA with laser-etched scale; azimuth; magnetic anti-skate
Headshell Three-point, adjustable; takes Linn and most third-party cartridges
Cable connection 5-pin DIN; tonearm cable not included
Finish Black; Pantone colors to order
Fitted as standard to Majik LP12
Introduced 2020

Linn Krane product page

Acceptable parameters for this arm

Effective mass 10 g (Hi-Fi News measurement)
Cartridge weight Linn publishes no weight limit; we fit cartridges up to 10 g
Tracking force Not published by Linn
Target resonance 8–12 Hz

An arm and cartridge resonate together at a low frequency set by the arm’s effective mass, the cartridge weight (plus about 1 g of screws) and the stylus compliance; we aim for 8–12 Hz, above record-warp rumble and below the audible range. Resonance figures below are calculated, not measured, and compliance quoted at 100 Hz is converted to a 10 Hz figure (×1.7).

Cartridges that match the Krane

Cartridge Weight Compliance Tracking force Output Resonance on this arm
Linn Adikt 7 g Not published 1.5–2.0 g 6.5 mV — (matched on weight)
Linn Krystal 7 g Not published 1.5–2.0 g 0.5 mV — (matched on weight)
Linn Koil 7.6 g Not published 2.0 g 0.4 mV — (matched on weight)
Linn Kendo (to order) 7.6 g 14 cu (10 Hz assumed) 2.0 g 0.45 mV est. 9.9 Hz
Linn Ekstatik 7 g Not published 2.0 g 0.45 mV — (matched on weight)
Ortofon MC Quintet Blue 9 g 15 cu 2.1–2.5 g 0.5 mV 9.2 Hz
Hana SL MK II 8.6 g 10 cu @100 Hz 2.0 g 0.4 mV 8.7 Hz
Hana ML 9.5 g 10 cu @100 Hz 2.0 g 0.4 mV 8.5 Hz
Clearaudio Maestro V2 Ebony 8.4 g 16 cu 2.2 g 3.6 mV 9.0 Hz
Clearaudio Concerto V2.1 7 g 15 cu 2.8 g 0.5 mV 9.7 Hz
Clearaudio Stradivari V2.1 7 g 15 cu 2.8 g 0.5 mV 9.7 Hz
Clearaudio Jubilee Panzerholz V2.1 7.5 g 15 cu 2.8 g 0.5 mV 9.6 Hz
Clearaudio Da Vinci V2.1 6.8 g 15 cu 2.8 g 0.5 mV 9.7 Hz
Benz Micro Glider SL 6.8 g 15 cu 1.7–2.0 g 0.4 mV 9.7 Hz
Benz Micro Glider SM 6.8 g 15 cu 1.7–2.0 g 0.8 mV 9.7 Hz
Benz Micro Glider SH 6.8 g 15 cu 1.7–2.0 g 2.5 mV 9.7 Hz
Benz Micro Zebra Wood L 9.6 g 15 cu 1.7–2.0 g 0.4 mV 9.1 Hz
Benz Micro Zebra Wood M 9.6 g 15 cu 1.7–2.0 g 0.8 mV 9.1 Hz
Benz Micro Zebra Wood H 9.6 g 15 cu 1.7–2.0 g 2.5 mV 9.1 Hz
Benz Micro Ref-S 9 g 15 cu 1.7–2.2 g 0.26 mV 9.2 Hz
Koetsu Urushi Vermillion 9 g 11 cu (Hi-Fi News) 1.8–2.0 g 0.2 mV 10.7 Hz
DS Audio DS-W3 7.9 g ≈10 cu @100 Hz (est.) 1.85–2.05 g 70 mV (optical) est. 8.9 Hz
DS Audio Master3 7.9 g ≈10 cu @100 Hz (est.) 2.0–2.2 g 70 mV (optical) est. 8.9 Hz
Lyra Delos 7.3 g ≈12 cu @100 Hz 1.65–1.75 g 0.6 mV 8.2 Hz

Linn cartridges publish no compliance figure; they are matched on weight and designed for Linn arms.

Close, but outside the published range

Lyra, Benz Micro and Koetsu models that miss the Krane’s range by a small margin.

Cartridge Weight Compliance Tracking force Output Resonance on this arm Why it falls outside
Lyra Kleos 8.8 g ≈12 cu @100 Hz 1.65–1.75 g 0.5 mV 7.9 Hz Resonance just below the 8–12 Hz window
Lyra Kleos SL 8.8 g ≈12 cu @100 Hz 1.65–1.75 g 0.25 mV 7.9 Hz Resonance just below the 8–12 Hz window
Lyra Kleos Mono 8.8 g ≈12 cu @100 Hz 1.65–1.75 g 0.25 mV 7.9 Hz Resonance just below the 8–12 Hz window
Lyra Etna λ 9.2 g ≈12 cu @100 Hz 1.62–1.72 g 0.56 mV 7.8 Hz Resonance just below the 8–12 Hz window
Lyra Etna λ SL 9.2 g ≈12 cu @100 Hz 1.62–1.72 g 0.25 mV 7.8 Hz Resonance just below the 8–12 Hz window
Lyra Etna λ Mono 9.2 g ≈12 cu @100 Hz 1.62–1.72 g 0.25 mV 7.8 Hz Resonance just below the 8–12 Hz window
Benz Micro Ruby Z 10.7 g 15 cu 1.8–2.2 g 0.34 mV 8.8 Hz 0.7 g over the 10 g limit
Benz Micro Ruby ZH 10.7 g 15 cu (est., as Ruby Z) 1.8–2.0 g 0.7 mV est. 8.8 Hz 0.7 g over the 10 g limit
Koetsu Rosewood Signature 9.18 g ≈5 cu @100 Hz (est.) 1.8–2.0 g 0.4 mV est. 12.2 Hz Resonance just above the 8–12 Hz window
Koetsu Urushi Black 9.37 g Not published; est. as Rosewood 1.8–2.0 g 0.4 mV est. 12.1 Hz Resonance just above the 8–12 Hz window
Koetsu Urushi Tsugaru 9.37 g Not published; est. as Rosewood 1.8–2.0 g 0.4 mV est. 12.1 Hz Resonance just above the 8–12 Hz window
Koetsu Urushi Wajima 9.37 g Not published; est. as Rosewood 1.8–2.0 g 0.4 mV est. 12.1 Hz Resonance just above the 8–12 Hz window

We set up every LP12 on our bench and will advise on any pairing.

Options

Sold as one item in black; other finishes and the cable are specified at order.

  • Color: black as standard; Linn offers Krane in a range of Pantone colors to order, ask us for the current list and lead time.
  • Tonearm cable: not included; add a T-Kable in RCA or XLR, 1.2 m or 1.7 m.
  • Cartridge: Adikt moving magnet or Koil moving coil, fitted and aligned by us.

Upgrade path

Every Sondek LP12 built since 1972 shares the same plinth geometry, so each part below bolts into any deck. Linn's own guidance is to prioritize upgrades source-first, and its components page gives the suggested order roughly as bearing, deck, power supply, sub-chassis, tonearm, cartridge, phono stage and base board. Prices are our current store prices for each part on its own; fitting is done in our workshop.

1 · Bearing Karousel $1,300
The one upgrade that applies to every LP12 regardless of specification: a stainless-steel housing and lock-nut make the union of platter, spindle, bearing and sub-chassis stiffer and stronger, so rotation is smoother and less vibration reaches the record.
2 · Deck and plinth LP12 plinth $1,155 · Bedrok $12,060
A new hardwood plinth renews the frame every other part mounts to; Bedrok, in densified beech more than twice the density of hardwood, is the only plinth Linn offers as a performance upgrade.
3 · Power supply and motor Majik PSU $740 · Lingo $2,505 · Radikal (Standard) $6,270 · Klimax Radikal $16,820
Speed accuracy and motor noise. Lingo adds Radikal-derived speed management and switched 45 rpm to the AC motor; Radikal replaces it with a brushed DC motor checked on every rotation and provides the power for a Urika phono stage.
4 · Sub-chassis and armboard Majik sub-chassis $591 · Kore $1,480 · Keel SE $6,215
Stiffness between bearing and arm. Kore bonds a machined armboard to a three-layer aluminum box; Keel SE machines sub-chassis and armboard from solid with underside bracing, which Linn quotes as 300 percent stiffer.
5 · Tonearm Krane $2,050 (this product) · Arko $4,965 · Ekos SE $6,725
Bearing friction, resonance control and tracking: the static-balanced Krane of the Majik LP12, the all-7075-aluminum gimballed Arko of the Selekt, and the hand-built titanium Ekos SE of the Klimax.
6 · Cartridge Adikt $923 · Koil $1,250 · Krystal $2,415 · Ekstatik $8,335
Resolution, tracking and the match to arm and phono stage; the Kendo moving coil fitted to the Selekt LP12 is available to order.
7 · Phono stage Uphorik $3,740 · Urika $4,290 · Urika II $4,630
Uphorik works with any turntable and preamplifier; Urika and Urika II mount inside the deck inches from the arm and require a Radikal.
8 · Base board Solid Base $247 · Trampolin $346
Trampolin's suspended, damped feet isolate the deck from the shelf; the Solid Base suits a rack that already isolates.
Where it sits in the range

Linn's three current tonearms for the Sondek LP12, in order of price.

  • Linn Krane (this model)
  • Linn Arko: gimballed 7075-aluminum arm of the Selekt LP12
  • Linn Ekos SE: hand-built titanium arm of the Klimax LP12

Krane is included in the Majik LP12; add a T-Kable. Cartridges: Adikt or Koil.

Reviews

Both reviews cover the Majik LP12 with the Krane fitted; Hi-Fi News adds arm measurements.

Configure or upgrade with Pearl Audio

Pearl Audio has been a Linn dealer since 2006, and the Sondek LP12 is the turntable we sell more of than any other; we keep upgrading those customers' decks over the years. LP12 setup and upgrades are done in-house by John and Russ, our two LP12 technicians, each of whom has been building LP12s for more than a decade. We stock most parts for most LP12 upgrades for immediate installation, carry all of Linn's current standard plinth finishes, and keep five LP12s in different configurations on display in our Portland showroom.

We fit and align the Krane on the bench, set VTA against its scale for your cartridge, and can supply it in a Pantone color to order. Read more in our Linn Sondek LP12 story.

Plan your Linn system with Pearl Audio

Pearl Audio is an authorized Linn dealer. Bring your LP12 to our Portland workshop or ask us to collect it; we fit the upgrade, reset the suspension and return the deck set up for your room. Call (503) 222-2599 or email sales@pearlaudio.com.

Signature technologies

The engineering behind the Linn LP12 Krane Tonearm

Linn gives its technologies names because each one solves a specific problem. Here is what each does, where it came from, why it matters in a system, and what you may hear.

The founding ideaSince 1973

The Sondek LP12 and source first

A belt-driven turntable on a three-point sprung sub-chassis, built around a patented single-point bearing and designed from the start to be upgraded: the oldest hi-fi component still in production, and the proof of Linn's rule that information lost at the source is lost forever. Read the deep diveClose

What it does

An AC synchronous motor, or a DC motor on Radikal decks, drives the inner platter through a flat belt. The platter, its bearing and the tonearm ride on a sub-chassis hung from three springs, isolated from the plinth and the motor, so vibration from the loudspeakers and the room has no easy path to the stylus. The bearing is a hardened point running on a thrust pad inside a precision bush, machined at the Tiefenbrun family's Castle Precision Engineering and patented in 1975. Every LP12 since 1973 shares that geometry, and every part around it has been redesigned at least once: the bearing twice, the sub-chassis four times, the power supply, the motor, the tonearms and the plinth. Linn's commitment is that any LP12 ever made can be brought to the current specification.

Why it matters in a system

Ivor Tiefenbrun's argument, made by taking the deck into shops and letting people listen, was that the source and not the loudspeaker decides what a system can do, because nothing downstream can recover what the stylus failed to read. It reordered how the industry spent its money, and it is why Pearl sets up the turntable first and builds the system around it. Our own page on the deck, The Linn Sondek LP12, tells the story part by part.

What you may hear

Pitch, timing and a lack of feedback that let a record sound like the musicians rather than the machine. David Price in StereoNET: the LP12's special sauce was its patented single-point bearing, and over fifty years the only way it could go was toward neutrality, and so it has. Herb Reichert in Stereophile found the current Klimax LP12 plowed through opera, Mahler and Brit-pop with unrivaled ease.

Krane, Arko, Ekos SE; Adikt to EkstatikSince 1988

Tonearms and cartridges

Linn has machined its own tonearms since the Ekos of 1988 and specifies a cartridge for each: Krane with Adikt or Koil, Arko with Kendo, Ekos SE with Ekstatik, each pair designed to drain resonance through the sub-chassis as one system. Read the deep diveClose

What it does

The Ekos SE, from 2006, carries a titanium arm tube on a stainless-steel bearing housing and remains Linn's reference arm. The Arko of 2022 is an all-new gimballed arm machined throughout from cold-drawn 7075 aluminum with far fewer parts between headshell and housing, Linn's first new in-house arm in sixteen years. The Krane of 2020, standard on the Majik LP12, is a static-balanced arm on a tungsten-and-sapphire vertical bearing with twin ceramic horizontal bearings, hand-assembled, with an effective mass of ten grams. The cartridges climb in step: the Adikt moving magnet and the Koil moving coil for the Krane; the Krystal; the Kendo, derived from the Ekstatik with a nickel-coated 7075 body and aluminum-bronze inserts and designed for the Arko; and the Ekstatik, a seven-gram honeycomb body with a micro-ridge stylus on a sapphire cantilever, stiffer than boron, developed with EMT and voiced on the Ekos SE.

Why it matters in a system

An arm and cartridge are a mechanical system with the sub-chassis beneath them, and Linn tunes each pair as one. It is why the three complete decks sound like three steps of the same thing rather than three different turntables, and why we fit other makers' cartridges to an LP12 only after checking arm mass and compliance on our bench.

What you may hear

The Krane and Adikt are warm and forgiving; the Arko and Kendo are quick, open and precise, what StereoNET called a highly emotional performer with a cleaner, more neutral midband; the Ekos SE and Ekstatik give the quiet, deep background and low-level detail of the Klimax deck. Chris Kelly: an arm that holds its own against the very best, and an extraordinarily good moving-coil cartridge.

All Linn technologies

The Linn story

Source first since 1973: the Sondek LP12, the first network music player, and a family company in Glasgow that upgrades rather than replaces.

Founded 1973 in Castlemilk, Glasgow; at Waterfoot, Eaglesham, since 1987 by Ivor Tiefenbrun · linn.co.uk

Milestones

  1. 1973 Linn founded in Castlemilk, Glasgow Ivor Tiefenbrun, an engineer at his father's firm Castle Precision Engineering, builds a turntable to cure the feedback in his own system and founds Linn Products to make it. The Sondek LP12 is the first product.Linn Klimax LP12 Turntable
  2. 1974 Isobarik, and the first Aktiv system Linn's first loudspeaker, with its patented isobaric loading, and its first active-crossover system: the crossover moved before the amplifiers, an idea Exakt would complete digitally forty years later.
  3. 1979 Ittok, Kan and a cutting lathe The Ittok LVII tonearm and the Kan loudspeaker; a Scully lathe bought to cut better test records becomes the seed of Linn Records.
  4. 1982 Valhalla, and Linn Records The Valhalla power supply is Linn's first electronics; Linn Records is founded, with The Blue Nile's A Walk Across the Rooftops among its first releases in 1983.
  5. 1985 LK1 and LK2 Linn's first preamplifier and power amplifier make it a complete-system company; the Axis turntable follows.
  6. 1987 The Eaglesham factory Linn moves into a purpose-built factory at Waterfoot, Eaglesham, designed by Richard Rogers around Single Stage Build: one person builds each product from start to finish and signs it.
  7. 1988 Ekos, Akito and Lingo The Ekos of 1988 is the first tonearm designed and built in-house; the Akito follows in 1989 and the Lingo, the first external LP12 supply, in 1990.Linn LP12 Ekos SE Tonearm
  8. 1992 Karik, Cirkus and an MBE Linn's first CD player and Numerik DAC; Ivor Tiefenbrun is appointed MBE; the Cirkus bearing and sub-platter upgrade of 1993 reaches every LP12.
  9. 1998 Sondek CD12 and the Klimax range A CD player machined from a solid aluminum billet founds Linn's flagship tier; the Klimax Solo of 1999 is the first product to carry the Klimax name.
  10. 2002 Royal Warrant Linn receives the Royal Warrant from the Prince of Wales and builds in-car audio for Aston Martin; Ivor Tiefenbrun had been Scottish Entrepreneur of the Year in 2001.
  11. 2006 Ekos SE and Keel The titanium Ekos SE tonearm and the one-piece machined Keel sub-chassis mark the LP12's thirty-third year; Chakra amplification and the first integrated Aktiv loudspeaker had arrived in 2004 and 2005.Linn Keel SE Sub-Chassis and Armboard
  12. 2007 Klimax DS The first high-resolution network music player, developed under Gilad Tiefenbrun: studio-master files over Ethernet, no disc and no moving parts. Linn Records becomes the first label to sell studio-master downloads.Linn Klimax Organik DSM Streamer
  13. 2009 No more CD players; Radikal and Urika Linn announces it will build no more CD players and will concentrate on network players; the Radikal motor supply and the Urika phono stage arrive for the LP12; Gilad Tiefenbrun becomes Managing Director.Linn Radikal Power Supply and Motor - Akurate Enclosure
  14. 2012 Queen's Award for Enterprise The DS platform earns the Queen's Award for Innovation; Linn Records had been Gramophone's Label of the Year in 2010, and the DSM players with HDMI arrived in 2011.
  15. 2013 Exakt On its fortieth anniversary Linn launches Exakt in the Klimax 350: the crossover performed digitally inside the loudspeaker, with each drive unit corrected. A forty-unit anniversary LP12 is built with a Highland Park cask-oak plinth.Linn Klimax Exaktbox Organik DAC
  16. 2015 Space Optimisation Model-based room correction becomes a free update to every Linn player; the Series 5 Exakt loudspeakers follow the same year, and Katalyst, the fourth-generation DAC, in 2016.
  17. 2018 Selekt DSM, Urika II and a new Lingo The configurable Selekt DSM with its slots and cartridges; Urika II with its Exakt Link output and the Radikal-derived Lingo for the LP12's forty-fifth anniversary. Krane and Karousel follow in 2020.Linn Selekt DSM: Classic Hub
  18. 2021 Organik, Radikal/2 and Ekstatik The next-generation Klimax DSM with Linn's first all-in-house DAC; the Radikal/2 and Ekstatik for the LP12. In 2022 Arko, Kendo and Koil, the Selekt LP12 replacing the Akurate, and the Selekt DSM Edition Hub with Utopik.Linn Ekstatik Moving Coil Cartridge
  19. 2023 Fifty years: LP12-50 and the 360 The Sondek LP12-50 with Jony Ive's LoveFrom and the first Bedrok plinth; the 360 loudspeaker with Adaptive Bias Control; the Klimax Solo 800 in January 2024.Linn 360 Loudspeakers
  20. 2025 Bedrok, Klimax Radikal, Keel SE, Solo 500 The Bedrok plinth released to every LP12 in February; the Klimax Solo 500 in May; the Klimax Radikal and Keel SE in October. In 2026 Linn's first in-house drive units, with the Pistonik motor, go into the 360, and the 343 arrives.Linn LP12 Bedrok Plinth
Read the Linn story
Linn

In 1973 a young Glasgow engineer named Ivor Tiefenbrun bought an expensive hi-fi system and found it sounded worse than his parents'. Tracing the problem, he discovered that the loudspeakers' output was feeding back through the turntable and corrupting the signal before it ever reached the amplifier. The received wisdom said the turntable merely went round and the speakers were what mattered; Tiefenbrun concluded the opposite. Working at his father Jack's firm, Castle Precision Engineering, with help from its machinists, he built a belt-driven deck with a sprung sub-chassis and a patented single-point bearing, designed to resist feedback and to extract everything cut into the groove, and founded Linn Products in Castlemilk to make it. The Sondek LP12 was the company's first product. More than fifty years later it is still in production and still upgradeable to the current specification, the oldest hi-fi component still being made, and Linn's founding principle has never changed: information lost at the source is lost forever.

Tiefenbrun's method of persuasion was to take the deck into shops and let people hear for themselves, and the demonstration turned the industry's priorities upside down. Over the next fifteen years Linn extended source-first thinking to every link in the chain: the Isobarik loudspeaker and the first Aktiv active-crossover system in 1974, the Ittok tonearm and the Kan in 1979, the Valhalla supply in 1982, Linn's first electronics, the LK1 and LK2 amplifiers in 1985, and the Ekos, the first tonearm designed and built entirely in-house, in 1988. A cutting lathe bought to make better test records became Linn Records in 1982, whose first releases included The Blue Nile's A Walk Across the Rooftops and which Gramophone named Label of the Year in 2010. In 1987 Linn moved into a purpose-built factory at Waterfoot, Eaglesham, designed by Richard Rogers around Single Stage Build, in which one skilled person builds each product from start to finish and signs it. Ivor Tiefenbrun was appointed MBE in 1992.

Linn built its first CD player, the Karik, in 1992, and in 1998 the Sondek CD12, machined from a solid aluminum billet, founded the Klimax range; the Klimax Solo of 1999 was the first product to carry the name. The 2000s brought the Royal Warrant and in-car audio for Aston Martin, a factory expansion that nearly doubled the plant, Chakra amplification and the first fully integrated Aktiv loudspeaker, and the Ekos SE and machined Keel sub-chassis for the LP12 in 2006. Then Linn did something no high-end company had done. In 2007 the Klimax DS, developed under Ivor's son Gilad Tiefenbrun, played studio-master files at 24 bits and 192 kHz straight from a network, with no disc, no drive and no moving parts; Stereophile found it better than any CD player its reviewer had heard. In November 2009 Linn announced it would stop making CD players altogether, Gilad became Managing Director and Ivor Executive Chairman, and the decision, taken as the financial crisis squeezed the high end, was vindicated by the Queen's Award for Enterprise in Innovation in 2012 and by profit every year since.

Owning the digital path let Linn attack problems no analog component could reach. Exakt, in 2013, keeps the signal digital all the way into the loudspeaker, where a phase-linear crossover corrects each measured drive unit and aligns every part of every note in time. Space Optimisation, in 2015, a free update to every Linn player, builds an acoustic model of the listener's own speakers, their position and the room and removes the energy the room adds. Katalyst in 2016 put Linn in control of every input to the converter chip, and Organik in 2021, Linn's first wholly in-house converter, replaced the chip with an FPGA and a discrete conversion stage that The Absolute Sound placed among the best DACs at any price. Linn has made its own switch-mode power supplies since 1993, and the Utopik generation now sits under the Klimax DSM, the Selekt DSM, the Klimax Solo amplifiers and the LP12's Klimax Radikal. Every one of these is a retrofit; a 2007 Klimax DS takes an Organik board in twenty minutes. The LP12 kept pace: Radikal and Urika in 2009, Urika II in 2018, Karousel in 2020, Ekstatik in 2021, Arko and Kendo in 2022, Bedrok, Klimax Radikal and Keel SE in 2025.

Linn marked its fiftieth year in 2023 with the Sondek LP12-50, a 250-unit edition refined with Jony Ive's LoveFrom and the first appearance of the Bedrok plinth, and with the 360, a four-way Exakt loudspeaker that Gilad Tiefenbrun called the finest Linn had ever made and the debut of Adaptive Bias Control, which corrects the bias of every output transistor in real time for the life of the amplifier. That technology went into the Klimax Solo 800 of 2024 and Solo 500 of 2025; in 2026 the 360 received Linn's first drive units designed entirely in-house, with the Pistonik motor, and the 343 followed. Linn remains an independent family business with no outside shareholders, Ivor Tiefenbrun as Chairman and Gilad Tiefenbrun as Chief Executive, and every product is still built by one person in the Eaglesham factory who signs it. Quality and longevity, not planned obsolescence, is how Linn puts it, which is why an LP12 bought in 1973, or a Klimax DS bought in 2007, is brought up to date rather than replaced.

The complete Linn story and technology library

Linn at Pearl Audio

Pearl Audio has been a Linn dealer since 2006 and is a Linn Reference Level dealer. Five Sondek LP12s in different configurations are on the floor, from the Majik to the Klimax on Bedrok, and John and Russ, our two LP12 technicians, have each been building and setting up the deck for more than a decade; Russ is our LP12 expert and sets up several turntables a week. Connor and Russ are our Linn digital streaming experts: they configure the Selekt and Klimax DSM, set up Space Optimisation and Exakt in your room, and keep the Linn systems in the showroom current. Linn digital, from the Selekt DSM to the Klimax DSM, the Klimax Solo amplifiers and the 360, is on demonstration, and we stock most LP12 upgrade parts for immediate installation. Read the deck's story on our LP12 page.

The Pearl Audio experience

How we work with you

A system at this level should be heard, thoughtfully matched, and properly set up. From the first audition to long-term ownership, you work with the same people, in person.

  1. 01

    Listen first

    The LP12 Krane Tonearm is not in our rooms at present. When it is the right piece for a client we arrange a demonstration unit from the manufacturer and set it up for a private session.

  2. 02

    Delivery and installation

    We deliver and install throughout the Portland area, taking care of placement, connections, ventilation and system configuration ourselves.

  3. 03

    Support for as long as you own it

    We support everything we sell for as long as you own it, whether the answer comes by phone, in your home, or through factory service.

  4. 04

    A path for what comes next

    Trade-in assistance and qualifying 100% Trade-Up options give you flexibility when your listening priorities or your system change.

Search