Analog at Pearl Audio

Turntable upgrade paths

A good turntable is rarely finished. Three of our houses design theirs to be improved a part at a time: the Linn Sondek LP12, the Clearaudio Signature and the Rega Planars. This is the order we suggest, and the parts for each.

The order that works

Setup comes first

A turntable that is level, with its arm and cartridge correctly aligned, will outplay a costlier one that is not. Before any part is changed, have the table checked.

Then the cartridge

The cartridge is the part that touches the record, it wears, and it is the simplest thing to change. On most tables a better cartridge is the first step that can be heard.

See the cartridges →

Then the power supply

Pitch that holds steady is the foundation of rhythm and of tone on sustained notes. An outboard supply drives the motor more precisely than the simple circuit inside most tables.

When to move up instead

Parts have a ceiling. When the next step costs more than the difference to the model above, it is time to move up, and we will say so.

See the turntables →

Linn Sondek LP12

No turntable has a longer upgrade path. Every Sondek LP12 made since 1972 can be brought to the current specification one part at a time: bearing, sub-chassis, power supply, arm, cartridge and phono stage. We keep most of these parts in the shop, and John and Russ fit them. What it stands on matters as well: an HRS isolation platform beneath a Sondek LP12 is an improvement we suggest often, and it helps on a lively floor.

Sondek LP12 upgrade parts 17 in the range

HRS isolation platforms 4 in the range

Clearaudio Signature

Clearaudio built the Signature as a modular turntable, meant to be improved by exchanging one part at a time. The arm can move from the Satisfy to the Satisfy Carbon Fiber or the Tracer. The Professional Power 12V takes the place of the plug-in power supply. The cartridge and the record clamp are chosen separately. Begin with the table as it suits you now and take the next step when you are ready. The Performance, Ovation and Innovation carry the same idea further. Each change is fitted and set up in our shop.

Clearaudio tonearms 8 in the range

Clearaudio clamps 7 in the range

Rega Planar

A Planar is improved in a few plain steps. Begin with the cartridge: the Planar 3 is offered bare or with the Nd3 or Nd5, the Planar 6 with the Nd5, Nd7 or Ania Pro, and the Planar 8 and 10 reach the Apheta 3 and Aphelion 2, and a better cartridge can be fitted to the table you own. Next is the Neo PSU, an outboard supply that can be added to a Planar 3 and is supplied with the Planar 6 and Planar 8. After that come the drive belt and the smaller fittings below.

Rega cartridges 9 in the range

Rega belts and fittings 16 in the range

With Pearl Audio as your dealer

The next step, fitted properly

An upgrade is only worth its cost if it is the right one and it is fitted well. This is what comes with one from Pearl Audio.

  • The right step for your tableWe look at what you own and say which change will do the most, and which can wait.
  • Parts on handWe keep most Sondek LP12 upgrade parts in the shop.
  • Fitted by John or RussEach has built and set up turntables for more than a decade.
  • Set up again afterwardAfter any change the table is set up from the beginning, not just reassembled.

Hear it for yourself

Arrange a private audition

Tell us what you would like to hear and we will have it set up and warmed up when you arrive. Bring a playlist and take your time.

Search