Analog at Pearl Audio

Analog guides

Playing records well is mostly a matter of matching and setup. These guides explain the parts that cause the most confusion, in plain language, so you can ask better questions of any dealer, including us.

Guides and tools

Build your Rega Planar

Choose a Planar, its cartridge and what goes with it, and see the total as you go.

Open the builder →

Build your Clearaudio Signature

The modular Concept Signature: choose the finish, the arm, the power supply and the cartridge.

Open the builder →

Build your Clearaudio Compass

A complete turntable with little to decide: its color, its cartridge and what goes with it.

Open the builder →

Match a cartridge to a tonearm

Enter four figures from the makers' specifications and see whether an arm and a cartridge suit each other, in plain words.

Open the matching guide →

Work out phono stage gain

Enter a cartridge's output and see how much gain to look for, and where to begin with loading for a moving coil.

Work out the gain →

Upgrade paths

What to change first, and what can wait, on a Rega Planar, a Clearaudio or a Sondek LP12.

See the paths →

Choosing a turntable in four steps

How most people work through our six turntable houses, from a first table to a reference.

Read the four steps →

Moving coil, moving magnet or optical

The three ways a cartridge turns a groove into a signal, what each needs from the rest of the system, and every cartridge we offer under each.

See the cartridges →

Phono stages explained

What a phono stage does, how tube and solid-state designs differ, and how to tell whether the input on your amplifier is enough.

Read the guide →

How the Sondek LP12 works

The suspended sub-chassis, the bearing and the power supply, and why each can be improved on a table made decades ago.

Read the guide →

The LP12 workshop

Service, rebuilding and upgrades for the Sondek LP12, done in the shop by John and Russ.

Visit the workshop →

With Pearl Audio as your dealer

Written from the bench

Nothing here is theory for its own sake. It is what we check when a turntable is on the bench in front of us.

  • Two techniciansJohn and Russ have each set up turntables for more than a decade.
  • Setup that fits the tableEvery Sondek LP12 and Clearaudio turntable is built and set up on our bench. Any other turntable is set up for you whenever you ask.
  • An answer for your systemIf yours is the unusual case, call or write and we will work it out with you.

Hear it for yourself

Arrange a private audition

Tell us what you would like to hear and we will have it set up and warmed up when you arrive. Bring a playlist and take your time.

Search