Linn · Exakt
A Linn system you do not see
A living room with two loudspeakers beside the fireplace, a turntable on a bureau, and nothing else in sight. Everything is connected by Ethernet cable in the walls.
This is based on a system we put together for a client. We have changed some details to keep it private, and named the components as you would find them now or as they were then.
The brief
The owner wanted music in his living room and did not want to look at equipment. There was a fireplace, with room for a loudspeaker on either side, and no place he was willing to give to a rack.
The hub, out of sight
The center of the system is a Linn Selekt DSM: Classic Hub, at $8,020. It lives in an equipment closet, away from the room.
That is the least costly way to build a Selekt: a bare hub, with Exakt Link in and Exakt Link out. It was enough because of what the rest of the system does for itself.
- No converter modules. The digital-to-analog converters are inside the loudspeakers.
- No amplifier modules. The amplifiers are inside the loudspeakers too.
- No analog inputs needed. Streaming is built into the Selekt.
- No phono stage in the rack. When a turntable came later, its phono stage was inside the turntable.
What the hub does supply is the music, the volume control and two Exakt Link ports.
Two loudspeakers by the fireplace
The loudspeakers were Linn 530s, Exakt models current at the time, each with its own amplifiers and converters built in. Each needs two things: a power outlet and one Exakt Link cable.
The cables run inside the walls and come out at a small wall plate on either side of the fireplace, next to a power outlet. That is all the wiring in the room. The owner controls everything from an iPad and never needs to see the Selekt.
Later, a subwoofer
Some time afterward the owner wanted deeper bass, and still no more equipment in view. We added a JL Audio Fathom F112, tucked out of sight in the same room. The work went in three steps.
- The subwoofer, tuned to the room. The Fathom has its own automatic room optimization, with a calibration microphone. We ran that first, so the subwoofer was right for the place where it sat.
- Exakt, connected to it. Linn makes an Exakt connection for subwoofers, the Exaktbox Sub. It takes Exakt Link from the hub, through the wall like everything else, and gives the subwoofer its own Exakt crossover, timed to the main loudspeakers.
- The room, optimized again. Linn's Space Optimisation already held this room: its dimensions and the materials it is built from. Because the subwoofer was now part of the Exakt system, its bass could be included in that model of the room. We optimized the room again with the subwoofer in it.
The subwoofer is worked out together with the loudspeakers and the room, not added on beside them. That is how it came to be integrated with the rest of the room to a very high degree.
Read about the JL Audio Fathom F112 v2 → Read about the Exaktbox Sub →
Later still, a turntable
Then came a Sondek LP12, on a bureau some distance from the loudspeakers and the subwoofer. We built it with the Urika II phono stage, which sits inside the turntable and has an Exakt Link port as its output. One more Ethernet cable runs through the wall to the hub.
There is no phono cable crossing the room and no phono stage to house. The record is played where the owner wants to stand, and the signal joins the system at the hub with everything else.
The Urika II converts the signal to digital inside the turntable, a few inches from the cartridge. It reaches the Selekt as data, is optimized there for the room with the subwoofer included, and goes on to the 530s. It becomes analog only inside the loudspeakers, at their own amplifiers.
Why it works
In an Exakt system the signal stays digital all the way to the loudspeaker. Exakt Link carries the audio, the master clock and the power trigger together on one cable.
- The cable is ordinary Ethernet cable, Cat 5 or Cat 6. The ports it plugs into are Linn's own Exakt Link ports, not Ethernet ports.
- It runs directly between Exakt Link ports. It does not go through a network switch or router.
- Linn's guidance is up to 100 meters for solid-core cable, the kind installed in walls, and 30 meters for flexible patch cable.
- Exakt devices can be chained, one to the next.
A house that already has Ethernet cable in its walls may need very little new wiring. One that does not will need the runs made, which is easiest during building or renovation.
Exakt: the signal stays digital to the loudspeaker →
Ask about installation. Call (503) 222-2599 or email sales@pearlaudio.com.
Cable guidance is Linn's, from its Exakt Link documentation.
