Linn · Sondek LP12 · A build of ours

A Klimax-level LP12 with a Lyra Etna and the Pass Labs XP-27

Linn's top mechanics, with the phono stage taken out of the turntable: a Lyra Etna in the Ekos SE and a two-chassis Pass Labs phono stage on the rack.

The turntable

The mechanics are those of the Klimax LP12: the Klimax Radikal motor and its supply, the Keel SE one-piece sub-chassis, the Karousel bearing and the titanium Ekos SE tonearm. A Klimax LP12 as Linn builds it has the Urika II phono stage inside the plinth and Linn's Ekstatik cartridge. This build has neither. The signal leaves the arm on Linn's T-Kable and goes to a phono stage of its own.

The cartridge: Lyra Etna Lambda

The Etna Lambda weighs 9.2 g and produces 0.56 mV, which is generous for a moving coil. On the Ekos SE the arm and cartridge resonance works out at 8.1 Hz, in the silver band, on the figure we use for Lyra's compliance.

The Ekos SE and the cartridges that suit it →   Lyra cartridges →

The phono stage: Pass Labs XP-27

The XP-27 is built in two chassis, with the power supply in one and the audio circuit in the other, so the supply's fields stay away from a signal measured in fractions of a millivolt.

It offers three gains: 56, 66 and 76 dB. At 56 dB the Etna's 0.56 mV comes out at 353 mV, in the gold band. The top setting, 76 dB, multiplies the signal more than six thousand times. That is there for the lowest-output moving coils, such as Lyra's SL versions at 0.25 mV, and it leaves gain in hand for any cartridge you might fit later.

0.56 mV × 631 = 353 mV

Lyra asks for a load between 104 and 887 Ω. The XP-27's settings include 160, 250, 320 and 500 Ω, so the final choice can be made by ear. Stereophile's reviewers auditioned the XP-27 with this cartridge.

The XP-27 and the cartridges that suit it →

Ask us about this build

Every LP12 we build is put together for its owner, so this one is priced to order. Call (503) 222-2599 or email sales@pearlaudio.com.

LP12 builds of ours

More on turntables

By maker

Search