← Back to your LP12 build

Accuphase · C Series

Accuphase C-57 Phono Amplifier

$13,975

Signature technologiesThe Accuphase story

Not currently in our rooms. For a serious buyer we will often bring a piece in from the manufacturer for a private session — tell us about your system and what you are weighing it against, and we will advise.

Accuphase · C Series

The C-57 is Accuphase's fully balanced phono amplifier: a dedicated balanced moving-coil input, three further phono inputs, ANCC noise canceling in the head amplifier and a monaural layout for each channel.

Price is for one unit.

64 / 70 dB
MC gain (MM 34 / 40 dB)
98 dB
signal-to-noise, MC
±0.3 dB
RIAA accuracy, 10 Hz–20 kHz
33 lb
14.8 kg

Authorized Accuphase dealer · Delivery and installation by Pearl Audio · Trade-ins welcome

The story

The C-57 succeeds the C-47 and is the first Accuphase phono stage to use ANCC in the moving-coil head amplifier: a low-noise secondary amplifier measures and cancels the residual noise and distortion of the main gain stage, where it matters most. The signal path is balanced from input to output, with a high-gain MC/MM head amplifier followed by a precision equalizer amplifier, and each channel is built as a separate monaural circuit on a symmetrical glass-cloth fluorocarbon board. Four 15,000 µF capacitors per channel and a dedicated low-noise supply for the ANCC circuit feed it.

One balanced MC input and three standard phono inputs let you run several arms or turntables. MC loading is selectable at 10, 30, 60, 100, 200 and 300 ohms and 1 kΩ, MM at 1 k, 47 k and 100 kΩ, gain is switchable between normal and high, and there is a 10 Hz subsonic filter and a polarity selector on the balanced output. With RIAA accuracy of ±0.3 dB and 98 dB signal-to-noise at 64 dB of MC gain, it is one of the quietest phono stages we have heard, and the right partner for a C-2300 or C-3900S.

Accuphase's standalone phono stages run from the C-27 of 2008 through the C-37 of 2014 and the C-47 of 2020 to the C-57 of May 2025, each the successor to the last. The C-57 is the first of them to carry ANCC, the noise-canceling circuit the company introduced in the C-3900 preamplifier of 2020, and like every Accuphase it is built, tested and serviced in Yokohama. Read the Accuphase story →

Key technologies

  • ANCC in the head amplifier. Accuphase's Noise and distortion Canceling Circuit is applied to the MC/MM head amplifier for the first time, with its own low-noise power supply.
  • Fully balanced signal path. Balanced amplification in both the head amplifier and the equalizer amplifier, from the balanced MC input to the balanced output.
  • Monaural construction. Left and right channels are separate circuits laid out symmetrically on a glass-cloth fluorocarbon resin board, each with four 15,000 µF supply capacitors.
  • Flexible loading and gain. Seven MC load settings including a new 60 Ω position, three MM settings, two gain ranges, a 10 Hz subsonic filter and output polarity selection.

The C-2300 is the preamplifier it partners; for an integrated, the AD-60 board brings phono to the E-4000 through its option slots.

Finishes

  • Champagne gold anodized aluminum front panel
  • Natural wood side panels with a natural wood-grain finish

Accuphase builds every component in a single finish, so there is nothing to choose. The champagne-gold front panel has been the house signature since 1972; this model adds natural wood-grain side panels. The top plate is hairline-finished aluminum.

Specifications
Type Stereo phono equalizer amplifier, fully balanced, MM/MC
Gain (1 kHz) MC 64 dB (normal) / 70 dB (high); MM 34 dB / 40 dB
Input impedance MC 10 / 30 / 60 / 100 / 200 / 300 Ω, 1 kΩ; MM 1 kΩ / 47 kΩ / 100 kΩ
RIAA deviation ±0.3 dB, 10 Hz–20 kHz (MM and MC)
Total harmonic distortion 0.005% (1 kHz, rated output)
Signal-to-noise ratio MC 98 dB (64 dB gain), MM 108 dB (34 dB gain); A-weighted, input shorted
Inputs 1 balanced MC (XLR), 3 phono (RCA)
Outputs Balanced (XLR) and line (RCA); 2 V rated, 8 V maximum, 50 Ω
Subsonic filter 10 Hz, −12 dB/octave, switchable
Crosstalk −90 dB (10 kHz)
Power consumption 22 W
Dimensions (W × H × D) 18.3 × 4.5 × 16.0 in (465 × 114 × 407 mm)
Weight 33 lb (14.8 kg)
Sold as Single unit

Accuphase C-57 product page and specifications

Where it sits in the range

Accuphase's only stand-alone phono stage. The alternative is the AD-60 phono board, which fits the option slot of any current Accuphase integrated or the C-2300.

Choose the C-57 when you run a top-class moving-coil cartridge, more than one arm, or want balanced output into a C-2300 or C-3900S.

Reviews

Plan your Accuphase system with Pearl Audio

Pearl Audio is an authorized Accuphase dealer in Portland, Oregon. We can help with system matching, delivery and setup, and arrange a listening appointment. Call (503) 222-2599 or email sales@pearlaudio.com.

Signature technologies

The engineering behind the Accuphase C-57 Phono Amplifier

Accuphase gives its technologies names because each one solves a specific problem. Here is what each does, where it came from, why it matters in a system, and what you may hear.

Accuphase Noise and distortion Canceling CircuitSince 2020

ANCC

ANCC is a feed-forward circuit that senses the noise and distortion at the AAVA's current-to-voltage converter and injects their opposite, cancelling them at any volume position. Introduced in the C-3900 of 2020, it is now in the integrated amplifiers from the E-3000 up, the current players and the C-57 phono stage. Read the deep diveClose

What it does

ANCC stands for Accuphase Noise and distortion Canceling Circuit. It is a feed-forward sub-amplifier attached to the current-to-voltage converter at the end of the AAVA volume control. The sub-amplifier samples the noise and distortion components present at the converter's input and injects a current of equal size and opposite polarity, so those components are cancelled before they reach the output. Because the correction acts in the I-V stage rather than on the volume setting, Accuphase states that it is effective at every volume position, and the company describes it as patented. ANCC first appeared in the C-3900 preamplifier of July 2020, came to an integrated amplifier with the E-5000 in November 2021, and reached the middle of the line with the E-4000 in 2022, whose predecessor E-480 had none. It is now in the E-3000, E-4000, E-700, E-800S and E-6000 integrateds and the C-3900S preamplifier, in the I-V converters of the DP-770, DP-570S, DP-470, DC-1000 and DC-500 digital products, and in the moving-coil head amplifier of the C-57 phono stage. The C-2300 and C-2900 preamplifiers use Balanced AAVA without it. In the E-6000 the sub-amplifier is built around a 1.5 nanovolt-per-root-hertz operational amplifier.

Why it matters in a system

The last active stage before the output sets the floor under everything upstream, and it is usually where a volume control's residual noise and distortion are added. Cancelling them there, rather than filtering afterward, is why the E-4000 is quoted at 20 percent lower noise than the E-480, and why the same circuit could be moved into a D/A converter's output stage and a phono stage's input.

What you may hear

Peter Katsoolis of StereoNET, describing the E-3000's noise-cancelling feed-forward stage, called the amplifier a sublime music-maker that is endlessly listenable; the audible gain is a quieter background at low volume settings.

Balanced from input to output, in parallelSince 2006

Instrumentation-amplifier topology, MCS+ and current feedback

Accuphase builds its amplifiers as instrumentation amplifiers, balanced from input to output with equal impedance on both legs, so noise picked up on the cable cancels. MCS+ sums several identical gain stages in parallel to lower noise, and current feedback keeps bandwidth and phase constant regardless of gain. Read the deep diveClose

What it does

An instrumentation amplifier is the laboratory circuit for amplifying a small difference between two signals while rejecting anything common to both. Accuphase builds its power amplifiers on that principle: the balanced input stage, the voltage amplification and the output are balanced from input to output, with equal impedance on the positive and negative sides, so hum and noise picked up on the interconnect appear on both legs and cancel. The P-7100 of 2006 presented the topology in a flagship together with two companions that remain in every current amplifier. MCS+, for Multiple Circuit Summing, runs several identical gain stages in parallel and sums their outputs, which lowers uncorrelated noise by the square root of the number of stages; the A-300's Double MCS+ parallels two complete amplifier units. Current feedback returns the feedback signal as current rather than voltage, which keeps bandwidth and phase response constant regardless of gain and, in Accuphase's words, ensures excellent phase characteristics in the high range. The P-4600's amplification stage is described as entirely comprising an instrumentation amplifier, with its gain selector acting on the input amplifier rather than attenuating the signal, and the C-57 phono stage applies the same current feedback and parallel-transistor input to its moving-coil head amplifier.

Why it matters in a system

The input of a power amplifier is where a few microvolts of noise become audible, and a circuit that treats the two legs of the signal identically rejects what the cable brings in. Parallel stages and current feedback keep the result stable and wide in bandwidth, which is how the P-7500 and the A-300 reach signal-to-noise ratios of 130 dB.

What you may hear

Stereophile observed that the A-300's amplification section operates like an instrumentation amplifier, with equalized input impedance on both sides. Andre Jennings of The Absolute Sound found the C-3850 and P-7300 never ventured into the bright and fatiguing, nor into the soft and dull.

Eight transistors in parallel for the smallest signalSince 2008

Phono stages: the C-57 and the AD-60 board

The C-57 is Accuphase's standalone phono stage, fully balanced, with an eight-transistor parallel moving-coil input, current feedback and ANCC. The AD-60 option board brings moving-magnet and moving-coil input to any current integrated amplifier or the C-2300 through its rear option slots. Read the deep diveClose

What it does

Accuphase offers vinyl playback two ways. The C-57 of May 2025 is its only standalone phono stage, the successor to the C-27 of 2008, the C-37 of 2014 and the C-47 of 2020. It is fully balanced, with a moving-coil head amplifier built on eight parallel low-noise bipolar transistors with current feedback and ANCC, and a moving-magnet input on three parallel junction FETs. Gain is 64 or 70 dB for moving coil and 34 or 40 dB for moving magnet; moving-coil loads of 10, 30, 60, 100, 200 and 300 ohms and 1 kilohm are selectable, with 60 ohms new to this model, and each of its four inputs, one of them a balanced moving-coil-only input, remembers its own settings. Input-referred noise is specified at -156 dBV for moving coil and -136 dBV for moving magnet, RIAA accuracy is guaranteed within 0.3 dB from 10 Hz to 20 kHz, and the power supply uses a toroidal transformer per channel and eight 15,000-microfarad capacitors. The other route is the AD-60 board of 2023, which fits one of the two rear option slots in every current integrated amplifier and in the C-2300 and gives moving-magnet and moving-coil input with 66 dB of moving-coil gain; the DAC-60 digital board and the LINE-10 line board fit the same slots.

Why it matters in a system

A phono stage adds more gain than anything else in the system, so its input transistors and its power supply set the noise floor for every record. The option-board approach lets an owner start with an integrated amplifier and add phono or digital inputs later, inside the same chassis, without a second box or a second power cord.

What you may hear

Chris Frankland of The Ear wrote that the C-57 simply makes the music make sense, and that it offers superb sound and good value for money. A quiet moving-coil stage shows up as record surfaces that recede behind the music.

Slightly more than twenty a day, every one tested for 24 hoursSince 1973

Built, tested and serviced in Yokohama

Everything Accuphase makes is designed, built, tested and serviced at one factory in Yokohama. Output is capped at slightly more than twenty units a day, each is run for at least 24 hours before inspection, every unit has had a history card since 1973, and the published service policy covers every model back to the first. Read the deep diveClose

What it does

Accuphase has designed, built, sold and serviced everything it makes from one site in Aoba ward, Yokohama, since June 1973. Production is deliberately limited to slightly more than twenty finished units a day, about 5,000 a year, from a staff of 84. Every unit, not a sample, is operated and tested for at least 24 hours, goes through vibration testing and a final inspection, and carries a history card that logs each process step; the company holds a complete record of those cards since the first product of 1973. Parts come only from suppliers with a Japanese manufacturing base or their authorized Japanese distributors, and published specifications are guaranteed figures rather than best-case ones. Front panels with the smallest mark are rejected and recycled. The service department has run since the company's founding, and the published policy is lifetime after-service: repairs are accepted for every model back to the C-200 and P-300 of 1973 as far as possible, major parts for all models are stored in quantity, hard-to-find parts may be remanufactured in-house, and every unit received gets an overhaul-level inspection. Warranty is five years on audio products sold from June 1, 2023, and a second-owner registration program gives used units two years of coverage. Model cycles run at least four years, some more than ten.

Why it matters in a system

A component bought for decades depends on the company still being there to service it, and Accuphase is privately held, more than 20 years without debt, with an equity ratio above 85 percent. The 24-hour test and the guaranteed specifications mean the unit delivered performs as the one that was reviewed.

What you may hear

Michael Johnson of The Absolute Sound wrote that the E-800S's build quality guarantees it will likely outlive us all. Edgar Kramer, after touring the factory, concluded that within reason, Accuphase takes no chances.

All Accuphase technologies and the company story

The Accuphase story

Designed, built, tested and serviced in Yokohama since 1973, to specifications that are guaranteed, not typical.

Founded 1972 in Tokyo, Japan, as Kensonic Laboratory; in Aoba ward, Yokohama since 1973 by Nakaichi Kasuga and Jiro Kasuga, with Shigemasa (Jim) Saito · accuphase.com

Milestones

  1. 1972 Kensonic Laboratory founded On June 1, brothers Nakaichi and Jiro Kasuga, late of Trio-Kenwood, and a few colleagues including Jim Saito found Kensonic Laboratory in Tokyo and adopt the Accuphase name, joining accurate and phase. Jiro Kasuga's house is the first office.
  2. 1973 Yokohama; C-200 and P-300 The company moves to Aoba ward, Yokohama, in June, where it remains. The C-200 preamplifier and P-300 power amplifier enter production in August, the T-100 tuner in September; the P-300 wins the Gold Prize at the Japan Compo Grand Prix.
  3. 1974 E-202, the first integrated Built on the P-300 and C-200 circuits, 100 watts per channel, ¥198,000: the beginning of the integrated-amplifier line that runs to the E-3000 and E-6000.Accuphase E-3000 Integrated
  4. 1982 Accuphase Laboratory, Inc. On its tenth anniversary Kensonic Laboratory takes the name of its products, unifying brand and company.
  5. 1986 DP-80 and DC-81 The first two-box digital front end, in July; the DP-70 integrated CD player follows in 1987 and the DC-91 of 1992, with sixteen parallel 20-bit converters, begins the MDS principle.Accuphase DP-770 SA-CD Player
  6. 1991 A-100: the Class-A line A pure Class-A monophonic amplifier of 100 watts with a MOS-FET output stage, in December. The A-50 stereo follows in 1993 and the A-20 in 1995.Accuphase A-80 Class A Power Amplifier
  7. 1996 Clean Power Supplies The PS-500 of March 1996 and the PS-1200 of April 1997 correct the AC waveform with an analog amplifier stage; the DG-28 Digital Voicing Equalizer of May 1997 begins the DG series.
  8. 2000 First SACD system The DP-100 transport and DC-101 processor, in June and July, are Accuphase's first separate SACD components.
  9. 2002 C-2800 introduces AAVA In July the C-2800 preamplifier, ¥1,100,000, replaces the variable resistor with sixteen switched current amplifiers. Every Accuphase preamplifier and integrated since uses AAVA.Accuphase C-2300 Preamplifier
  10. 2010 Balanced AAVA The C-3800 of July runs two AAVA modules per channel as a balanced pair. The P-7100 of 2006 had already brought the instrumentation-amplifier topology, MCS+ and current feedback together in a flagship, and the DP-700 of 2007 carried MDSD conversion for DSD.Accuphase P-7500 Power Amplifier
  11. 2019 E-800 opens the anniversary series In November the Class-A E-800, in the company's words the pinnacle of Class-A integrated amplifiers, is the first of the fiftieth-anniversary models.Accuphase E-800S Integrated
  12. 2020 C-3900: ANCC and Dual Balanced AAVA The second anniversary model, in July, cancels noise and distortion at the volume control's output with the Accuphase Noise and distortion Canceling Circuit, and records the lowest noise of any Accuphase preamplifier. The DP-1000 and DC-1000 follow in August 2021 as the third.
  13. 2022 Fifty years: P-7500, A-300, E-4000 The P-7500 doubles the P-7300's power to 300 watts per channel; the A-300 monoblock, five years in development and the fifth anniversary model, delivers 125 Class-A watts in October; the E-4000 brings ANCC to the middle of the integrated line in November.Accuphase A-300 Mono Power Amplifiers (pair)
  14. 2023 C-2300, P-4600, DP-770 and A-80 The C-2300 and AD-60 phono board in June, the P-4600 in October, the DP-770 and A-80 in November. Japan's Audio Meiki Award 2024 gives the A-80 Gold and the other three Silver; the A-300 debuts in the US at AXPONA in April.Accuphase P-4600 Power Amplifier
  15. 2024 Stereophile Amplification Component of the Year The A-300 takes Stereophile's award. The E-700 becomes the first Class-A integrated with Balanced AAVA in April, the E-800S succeeds the E-800 in October, and the A-48S replaces the A-48.Accuphase E-700 Integrated
  16. 2025 E-3000, C-57 and three more The E-3000 merges the E-380 and E-280 in April, the C-57 phono stage arrives in May, the T-1300 tuner in June, the C-3900S in October and the DP-570S in November. The E-6000, 260 watts per channel, follows in October 2026 as the most powerful integrated the company has made.
Read the Accuphase story
Accuphase A-300 Class A monaural power amplifier, front

Accuphase was founded on June 1, 1972, in Tokyo as Kensonic Laboratory, Inc. by the brothers Nakaichi and Jiro Kasuga, who left Trio-Kenwood with a small number of colleagues, among them Shigemasa "Jim" Saito, to build components that would rank among the best in the world. For about a year Jiro Kasuga's house in Ota ward served as office and design studio. The brand name joined "accurate" with "phase," which the founders considered an important factor in audio technology, and was so unfamiliar that the company was often assumed to be foreign. The founders chose a small production run over mass production, with design, manufacture, sales and service all kept in-house. In June 1973 the company moved to Aoba ward in Yokohama, where it remains, and in August 1973 the first products went into production: the C-200 preamplifier and P-300 power amplifier, followed in September by the T-100 tuner. That autumn the P-300 won the Gold Prize at the Japan Compo Grand Prix, which the company credits with launching its growth, and in May 1974 the E-202, built on the P-300 and C-200 circuits, began the integrated-amplifier line at 100 watts per channel and ¥198,000.

The 1970s brought the M-60 monophonic amplifier in 1975, the C-240 preamplifier in 1978 and the P-400 in 1979. On its tenth anniversary in 1982 Kensonic Laboratory took the name of its products and became Accuphase Laboratory, Inc. Digital arrived in July 1986 with the DP-80 CD transport and DC-81 processor, the company's first two-box digital front end, and the DP-70 integrated player followed in 1987. In December 1991 the A-100, a pure Class-A monophonic amplifier of 100 watts with a MOS-FET output stage, opened the Class-A A series; the A-50 stereo followed in May 1993 and the A-20 in May 1995. The DC-91 processor of 1992 used sixteen parallel 20-bit converters, the beginning of the MDS parallel-conversion principle still used in every Accuphase player. The PS-500 Clean Power Supply of March 1996 and the PS-1200 of April 1997 treated the AC line as a waveform to be corrected by an analog amplifier stage, and the DG-28 Digital Voicing Equalizer of May 1997 began the DG series of measurement-driven room equalizers.

In June and July 2000 the DP-100 transport and DC-101 processor became Accuphase's first separate SACD system. In July 2002 the C-2800 preamplifier, at ¥1,100,000 and shipped alongside the M-8000 monoblock, introduced AAVA, the Accuphase Analog Vari-gain Amplifier, a volume control with no variable resistor in the signal path; every preamplifier and integrated amplifier the company has made since uses it. The P-7100 stereo amplifier of 2006, with the C-2810, brought the instrumentation-amplifier topology, the MCS+ parallel circuit and current feedback together in a flagship, and the DP-700 of December 2007 carried MDSD, the company's double-speed conversion for DSD. The C-3800 of July 2010 added Balanced AAVA, two AAVA modules per channel in a fully balanced pair. The A-200 Class-A monoblock followed in July 2012, the P-7300 in December 2015, the A-250 mono in April 2017, the T-1200 tuner in April 2018 and the DP-750 player in June 2018.

Accuphase marked its fiftieth year early and over several seasons. The E-800 of November 2019, described by the company as the pinnacle of Class-A integrated amplifiers, was the first of the anniversary series. The C-3900 preamplifier of July 2020 was the second, introducing Dual Balanced AAVA and ANCC, the Accuphase Noise and distortion Canceling Circuit, which cancels noise and distortion at the volume control's output stage and gave the company the lowest preamplifier noise in its history; the C-47 phono stage and DG-68 equalizer arrived the same year. The DP-1000 transport and DC-1000 processor of August 2021 were the third, and the E-5000 integrated came that November. In the anniversary year itself, 2022, the P-7500 doubled the P-7300's power to 300 watts per channel, the E-4000 brought ANCC to the middle of the integrated line in November, and in October the A-300, five years in development and the fifth anniversary model, delivered 125 watts of Class A per monoblock. The A-300 made its US debut at AXPONA in April 2023 and in 2024 was named Stereophile's Amplification Component of the Year.

The current range filled out quickly. In 2023 came the C-2300 preamplifier and AD-60 phono board in June, the P-4600 in October, and the DP-770 SA-CD player and the A-80 Class-A stereo amplifier in November; Japan's Audio Meiki Award 2024 gave the A-80 its Gold award and the DP-770, C-2300 and P-4600 Silver. In 2024 the E-700 became the first Class-A integrated with Balanced AAVA, the E-800S succeeded the E-800 with the theme of ultra-low noise, and the A-48S replaced the A-48. In 2025 five models followed: the E-3000 in April, merging the E-380 and E-280 into one entry model, the C-57 phono stage in May, the T-1300, the fifteenth tuner since the T-100, in June, the C-3900S in October and the DP-570S in November. In 2026 the DC-500 converter, DP-470 player and DG-78 equalizer were listed as new alongside the company's third-ever price revision in Japan, effective October 1, 2026, and on September 29 the E-6000, at 260 watts per channel the most powerful integrated amplifier Accuphase has made, was announced.

Accuphase Laboratory today is run by President Masaomi Suzuki and Executive Vice President Fumiaki Wada from the same Yokohama address it moved to in 1973, with Jim Saito as corporate advisor. It is privately held, reports more than 20 years without debt and an equity ratio above 85 percent, employs 84 people, recorded net sales of ¥3.1 billion in the year to September 2025, and has released more than 250 models, about five a year. It makes about 5,000 units annually, slightly more than twenty a day, each operated and tested for at least 24 hours and logged on a history card; the file of cards is complete back to 1973. It sells through about 100 dealer companies in Japan and distributors in more than 60 countries, Axiss Audio USA among them, and publishes a lifetime after-service policy covering every model it has made and a five-year warranty. The company's stated vision is that the ideal audio equipment is equipment that disappears; its slogan is to enrich life through technology.

The complete Accuphase story and technology library

Accuphase at Pearl Audio

Pearl Audio is an authorized Accuphase dealer in Portland. We help customers choose among the integrated amplifiers, the preamplifier and power amplifier pairs, the Class-A monoblocks and the DP-770 according to their loudspeakers, room and sources, and we configure option boards, phono loading and gain settings before delivery. We deliver and set up Accuphase systems in the home and compare components there when the choice is close. We also handle warranty registration and service arrangements for Accuphase owners.

The Pearl Audio experience

How we work with you

A system at this level should be heard, thoughtfully matched, and properly set up. From the first audition to long-term ownership, you work with the same people, in person.

  1. 01

    Listen first

    The C-57 Phono Amplifier is not in our rooms at present. When it is the right piece for a client we arrange a demonstration unit from the manufacturer and set it up for a private session.

  2. 02

    Delivery and installation

    We deliver and install throughout the Portland area, taking care of placement, connections, ventilation and system configuration ourselves.

  3. 03

    Support for as long as you own it

    We support everything we sell for as long as you own it, whether the answer comes by phone, in your home, or through factory service.

  4. 04

    A path for what comes next

    Trade-in assistance and qualifying 100% Trade-Up options give you flexibility when your listening priorities or your system change.

Search