← Back to your LP12 build

MOON · 110LP v2

MOON 110LP v2 Phono Preamplifier

$600

Signature technologiesThe MOON story

On demonstration

On the floor at our Portland showroom. Ask and we will set it up for you to hear.

MOON · 110LP v2

The 110LP v2 is the entry to MOON analog: a compact MM/MC phono preamplifier with five gain settings to 66 dB, adjustable loading and capacitance, RIAA or IEC equalization and inductive DC filtering, in an aluminum chassis.

Price is for one unit. External AC power supply included. Settings are made with DIP switches underneath.

40 – 66 dB
gain in five settings
104 dB
signal-to-noise at 40 dB gain (MOON spec)
4 × 4
loading and capacitance settings
3.3 lb
weight (1.5 kg)
Options and pricing

Authorized MOON dealer · Delivery and installation by Pearl Audio · Trade-ins welcome

The story

The 110LP v2 applies the thinking of MOON's larger phono stages at a price where most competitors use a single op-amp and a wall adapter. The circuit is mirror-image symmetrical on four-layer printed circuit boards with pure copper traces for low impedance, and the power supply, fed from an external AC adapter, uses the inductive DC filtering principle of the 810LP for what Simaudio calls "a significantly lower noise floor." The chassis is rigid aluminum with gold-plated RCA connectors, and the unit is designed to be left powered for best performance; it draws 2 watts at idle.

Five gain settings, 40, 50, 54, 60 and 66 dB, cover moving-magnet and moving-coil cartridges; resistive loading is 10, 100 or 475 Ω or 47 kΩ, capacitance 0, 100, 330 or 430 pF, and the equalization curve RIAA or IEC, all set by DIP switches on the underside with the supplied stick. The published figures are 104 dB signal-to-noise at 40 dB gain, 87 dB at 60 dB, 0.002% THD and a 20 Hz to 20 kHz response within 0.5 dB, with an increased input overload margin over the original 110LP.

What Hi-Fi? has kept the 110LP v2 among its award winners for years, most recently as a 2024 Award winner, calling it "one of the best of its kind at this level" with a sound that is "smooth, fluid and refined but has enough in the way of drive and punch to satisfy." StereoNET's Jay Garrett gave it an Applause Award in 2019: "Bass was powerful, highs clear and mids projected."

In the range, the 110LP v2 is the first step; the 310LP ($2,300) adds a toroidal supply on its own board, balanced XLR outputs and two i²DCf stages, and the 610LP ($8,500) moves to a full-width dual-mono balanced design. Choose the 110LP v2 for a moving-magnet or medium-output moving-coil cartridge on a 250i v2 or any amplifier without a phono input, or as the quiet upgrade to a built-in stage.

Pearl Audio carries Rega turntables and Hana cartridges at the level the 110LP v2 suits, and we set its switches for your cartridge before it leaves the store.

MOON 110LP v2 lifestyle view with a turntable

Key technologies

  • Inductive DC filtering. The power-supply filtering principle of the 810LP, applied to the 110LP v2's regulated supply for a lower noise floor. See the i²DCf deep dive below.
  • Mirror-image symmetrical circuit. Matched channels on four-layer copper boards for low impedance.
  • Five gain settings. 40, 50, 54, 60 and 66 dB for moving-magnet and moving-coil cartridges.
  • Adjustable loading and curve. 10 Ω, 100 Ω, 475 Ω or 47 kΩ; 0, 100, 330 or 430 pF; RIAA or IEC.
  • Rigid aluminum chassis. With gold-plated RCA connectors; designed to be left powered.
  • Made in Boucherville, Québec. Hand-assembled and tested; up to 10 years of warranty with registration within 30 days.

Finishes

  • Black black anodized aluminum

The 110LP v2 is supplied in black.

Specifications
Type Compact MM/MC phono preamplifier, mirror-image symmetrical circuit
Inputs 1 pair RCA
Outputs 1 pair RCA
Gain 40 / 50 / 54 / 60 / 66 dB
Resistive loading 10 Ω / 100 Ω / 475 Ω / 47 kΩ
Capacitive loading 0 / 100 / 330 / 430 pF
Equalization RIAA or IEC
Signal-to-noise ratio 104 dB at 40 dB gain; 87 dB at 60 dB gain (full scale)
THD 0.002% (20 Hz – 20 kHz)
Intermodulation distortion 0.002%
Frequency response 20 Hz – 20 kHz (±0.5 dB)
Power supply External AC power supply, 100 – 240 V, 50/60 Hz; inductive DC filtering
Power consumption 2 W idle
Control DIP switches on the underside; adjustment stick supplied
Dimensions (W × H × D) 5.0 × 1.65 × 6.5 in (12.7 × 4.2 × 16.5 cm)
Weight 3.3 lb (1.5 kg)
Warranty 1 year standard; up to 10 years with registration within 30 days (USA and Canada)

MOON 110LP v2 product page and specifications

Where it sits in the range

MOON's phono preamplifiers, cheapest to dearest. The 110LP v2 is the entry point.

It pairs naturally with the 250i v2 as an upgrade to its built-in MM stage, or with any amplifier without a phono input.

Reviews

Plan your MOON system with Pearl Audio

Pearl Audio is an authorized MOON dealer. We can match it to the rest of your system, set it up in your room and arrange an audition in our Portland showroom. Call (503) 222-2599 or email sales@pearlaudio.com.

Signature technologies

The engineering behind the MOON 110LP v2 Phono Preamplifier

MOON gives its technologies names because each one solves a specific problem. Here is what each does, where it came from, why it matters in a system, and what you may hear.

Signature technologySince 2011

i²DCf (Independent Inductive DC Filtering)

A dedicated inductor filtering the DC supply of every integrated circuit in the signal path, so each gain stage draws from its own quiet reservoir of power. Read the deep diveClose

What it does

A phono preamplifier amplifies a signal measured in fractions of a millivolt, so any noise riding on its power rails ends up in the music. MOON's answer is to give each IC in the audio path its own inductor-based filter stage: 40 stages in the 850P preamplifier, 24 in the 810LP and 610LP phono stages, 2 in the compact 310LP, with the same inductive DC filtering principle in the 110LP v2. Behind the filters sits multi-stage voltage regulation, four stages of what Simaudio calls M-LoVo (MOON Low Voltage) in the 810LP, and in the top models a separate power supply board with a toroidal transformer. The optional 820S external supply takes the idea further for the 610LP, 810LP and the North players: two toroidal transformers, pi filtering with 40,000 µF and dual 20 mH chokes per supply, and four stages of discrete M-R2S regulation.

Why it matters in a system

With a moving-coil cartridge at 60 to 70 dB of gain the phono stage is the noisiest link in most systems, and its noise floor sets how much of the groove you hear. Independent filtering stops stages from modulating one another through the supply, and the result is the very low noise MOON's phono stages are known for: 115 dBr at 40 dB gain on the 810LP, 112 dBr on the 610LP, 110 dBr on the 310LP. It also makes the units unusually insensitive to the quality of the mains.

What you may hear

Black silence between tracks even with a low-output moving coil, and the small details of a record, room sound, decays, the texture of a bow, that noise would otherwise bury. Michael Fremer's verdict on the 810LP: "the 810LP was dead quiet."

Made in Canada

Hand-assembled in Boucherville, Québec

Every MOON component is designed, hand-assembled and tested in Simaudio's own factory in Boucherville, across the St. Lawrence from Montréal, as it has been since the company's founding in 1980. Read the deep diveClose

What it does

Simaudio has built its own products in Québec since Victor Sima founded the company in 1980. Under Jean Poulin, owner and chief executive for nearly two decades, the operation grew from a 3,000-square-foot shop to a 46,000-square-foot, vertically integrated factory in Boucherville, where engineering, assembly and quality control sit under one roof. When Poulin handed the company to three of its own people in 2013, their commitment was that MOON "will continue to be engineered and manufactured in-house, in Quebec." Boards are populated, chassis finished and every unit hand-assembled and measured before it leaves; a single 888 monoblock takes about a week to build.

Why it matters in a system

Keeping design and production together is how a small company controls quality at this level: the engineer who specified a matched set of transistors can walk to the bench where they are selected, and a change in a circuit can be made in production the same month. It is also what makes long-term service realistic. A MOON component bought today can go back to the people who built it, and the 10-year warranty program rests on that.

What you may hear

Consistency. Two 761s sound like two 761s, and the one you audition in Portland is built the same way as the one delivered to your home.

Ownership

10-year warranty

Register a new MOON component within 30 days of purchase from an authorized dealer and the one-year standard warranty is replaced by up to ten years of coverage against manufacturing defects. Read the deep diveClose

What it does

In Canada and the United States every MOON component carries a one-year parts-and-labor warranty. With a validated registration completed within 30 days of purchase from an authorized MOON dealer, that limited warranty is replaced by an extended warranty of up to ten years against manufacturing defects. Mechanical parts, the laser transport, volume control and switches, are covered for three years under the extended program. The coverage is not transferable from one private owner to another, which is one reason a MOON component bought new, from a dealer, holds its value. Outside Canada and the United States the dealer or distributor sets the terms.

Why it matters in a system

A ten-year commitment is a statement about how the products are built and how long the company expects to support them, and it changes how you plan a system: a 641 or 791 bought today is a component you can build around for a decade, with Simaudio's own factory behind it. Ask Pearl Audio to help with registration when your component is delivered; the 30-day window starts at purchase.

What you may hear

Peace of mind is not audible, but a system you are not worried about is one you listen to more.

All MOON technologies and the company story

The MOON story

Canadian engineering since 1980, devoted to revealing the recording: not spectacle, not excess.

Founded 1980 in Québec, Canada (today Boucherville, near Montréal) by Victor Sima · simaudio.com

Milestones

  1. 1980 Sima Electronics founded Engineer and musician Victor Sima founds the company in Québec; its early PW2000 amplifier is aimed first at professional users.
  2. 1990 Simaudio Ltd. and Celeste The company's timeline places the Simaudio Ltd. name and the Celeste series here; the Celeste i-5080 integrated amplifier earns a following.
  3. 1997 The MOON Series Simaudio launches MOON as its reference-grade line. The i-5 integrated amplifier, W-5 power amplifier and P-5 preamplifier define the period.
  4. 2010 30th anniversary Limited editions of the MOON 600i and the Evolution 750D converter in high-gloss red, each with a 30-year warranty.
  5. 2011 Evolution 850P The two-chassis flagship preamplifier is shown at CES: eight-point floating suspension, dual-mono supply and the M-Ray 530-step volume control.MOON 850P Preamplifier
  6. 2012 MiND The 180 MiND is Simaudio's first network streamer, built on MiND, the MOON intelligent Network Device. The 810LP reference phono preamplifier arrives the same year.MOON 810LP Phono Preamplifier
  7. 2013 New owners from within Jean Poulin, owner and CEO for nearly two decades, passes the company to Costa Koulisakis, Thierry Dufour and Louis Lemire. Production stays in-house in Québec.
  8. 2018 888 and MiND 2 The 888 monoblock ships (888 W into 8 ohms, 32 matched bipolar transistors, no global feedback) after its CES 2017 debut; MiND 2 is shown at HIGH END Munich.MOON 888 Power Amplifier
  9. 2022 EISA award for the ACE The MOON ACE all-in-one player wins the EISA High-End Stereo System 2022-2023 award.
  10. 2023 North Collection Unveiled at HIGH END Munich: 641, 681, 761, 791, 861 and 891, introducing MDCA, the MDE digital engines, M-RAY2 and M-VOL3 volume control, MOONLink and the BRM-1 remote.MOON 891 Network Player / Preamplifier
  11. 2025 Compass Collection The 371 Network Player / Amplifier opens a more accessible range built on MDCA and the MHP hybrid power supply, and wins EISA's Premium Integrated Amplifier 2026-2027; the 491, 461 and 341 follow in 2026.MOON 371 Network Player / Amplifier
  12. Now MOON 110LP v2 Phono Preamplifier The 110LP v2 is the entry to MOON analog: inductive DC filtering, four-layer copper boards and a mirror-image circuit, with five gain settings for MM and MC cartridges, hand-assembled in Boucherville like every MOON.
Read the MOON story
MOON 791 Network Player / Preamplifier from the North Collection in a living room (manufacturer photo)

Simaudio began in 1980, when Victor Sima, an engineer and musician, founded Sima Electronics in Québec to build amplifiers for people who found mass-market audio wanting; its early PW2000 amplifier was aimed first at professional users. The company's own timeline places the Celeste series and the Simaudio Ltd. name at 1990, and the Celeste i-5080 integrated amplifier, which brought the firm's preamplifier and power amplifier work into one chassis, gave it a following. In 1997 Simaudio introduced the MOON Series, a reference-grade line that moved the company into the high end. The MOON i-5 integrated amplifier, the W-5 power amplifier and the P-5 preamplifier defined the period and set the house values that still hold: amplifiers without global feedback, dual-mono construction, and a sound that reveals rather than flatters.

Under Jean Poulin, owner and chief executive for nearly two decades, the company grew from a 3,000-square-foot shop to a 46,000-square-foot, vertically integrated factory in Boucherville, across the St. Lawrence from Montréal, and MOON became a brand sold around the world. The 2000s added home theater, the MOON ROCK monoblock and the Attraction processor, and then the Evolution Series brought the brand into a new tier: the 750D, the fully balanced converter Simaudio counts as its digital milestone, and the Evolution 850P preamplifier, shown at CES in January 2011 with its two-chassis layout, eight-point floating suspension and M-Ray 530-step volume control, which became the reference for everything that followed. In 2012 Simaudio launched its first network streamer, the 180 MiND, and with it MiND, the MOON intelligent Network Device.

In September 2013 Poulin handed the company to three of its own people: Costa Koulisakis, who had spent thirteen years building its sales and customer relationships; Thierry Dufour, chief engineer for almost twenty years and the designer behind its award-winning products; and Louis Lemire, an engineer with a business background. Their commitment was that MOON would continue to be engineered and manufactured in-house in Québec. The 888 monoblock, shown as a prototype at CES 2017 and shipped in 2018, was their statement piece: 888 watts into 8 ohms, 32 hand-matched bipolar transistors mounted in cast heat sinks machined to a thousandth of an inch, no global feedback, and about a week on the bench for each one. MiND 2, the second-generation streaming platform, arrived the same year.

The modern MOON took shape over the following years. In 2022 the ACE all-in-one player won the EISA High-End Stereo System award, confirming that the company's streaming platform could carry a complete system. In May 2023 at HIGH END Munich the company unveiled the North Collection, six components (641, 681, 761, 791, 861, 891) that introduced MDCA distortion-cancelling amplification, the MDE digital engines, the M-RAY2 and M-VOL3 volume controls, MOONLink system control and the BRM-1 Bluetooth remote; Stereophile measured the 861 and called the result "one of the best I have encountered." In 2025 the Compass Collection followed, opening with the 371 Network Player / Amplifier, EISA's Premium Integrated Amplifier 2026-2027, and continuing with the 491, 461 and 341, bringing MDCA and the MHP hybrid power supply to a more accessible range. MOON International now carries the brand beyond North America.

The philosophy has not changed since the i-5. Simaudio describes its aim as bringing listeners "closer to the emotional truth of a performance," revealing the recording "with natural authority and emotional depth," and sums up the design brief as "Not spectacle. Not excess." Every MOON component is still designed, hand-assembled and tested in Boucherville, backed by a ten-year warranty with registration, and the company counts more than 400 awards worldwide. Pearl Audio keeps the Compass and North Collections on the floor in Portland.

The complete MOON story and technology library

MOON at Pearl Audio

Pearl Audio is an authorized MOON dealer and keeps the Compass and North Collections on the floor in Portland. Our MOON representative is Ari Margolis. Ask us about registering your MOON purchase for the 10-year warranty (registration must be completed within 30 days); we handle delivery and setup ourselves.

The Pearl Audio experience

How we work with you

A system at this level should be heard, thoughtfully matched, and properly set up. From the first audition to long-term ownership, you work with the same people, in person.

  1. 01

    Listen first

    Hear the 110LP v2 Phono Preamplifier by appointment in one of our two purpose-designed demonstration rooms, with your own music and time to compare without pressure.

  2. 02

    Delivery and installation

    We deliver and install throughout the Portland area, taking care of placement, connections, ventilation and system configuration ourselves.

  3. 03

    Support for as long as you own it

    We support everything we sell for as long as you own it, whether the answer comes by phone, in your home, or through factory service.

  4. 04

    A path for what comes next

    Trade-in assistance and qualifying 100% Trade-Up options give you flexibility when your listening priorities or your system change.

Search