← Back to your LP12 build

T+A Elektroakustik · R-Series

T+A Elektroakustik T+A MP 2000 R G3 CD Player / Streaming DAC

$11,990

Signature technologies

Not currently in our rooms. For a serious buyer we will often bring a piece in from the manufacturer for a private session — tell us about your system and what you are weighing it against, and we will advise.

T+A Elektroakustik · R-Series

The MP 2000 R G3 is a CD player, streaming client, FM/DAB+ tuner, Bluetooth receiver and PCM/DSD DAC in one 8.2 cm case, built around T+A's quadruple converter and True 1-Bit DSD path.

Includes the SRC 1 remote. T+A's November 2026 US price list refers to this model as the MP 2000 R SL.

384 kHz
PCM, 32-bit over USB
DSD512
native, over USB
110 dB
signal-to-noise and channel separation
8 kg
17.6 lb
Options and pricing

Authorized T+A Elektroakustik dealer · Advice and support from Pearl Audio · Trade-ins welcome

The story

T+A calls the MP 2000 R G3 a multi-source player, and the description is literal. A CD mechanism with a floating sub-chassis sits alongside a third-generation streaming board, FM, FM-HD and DAB+ tuners, an aptX HD Bluetooth receiver and a full set of digital inputs, including asynchronous USB. Everything ends at the same converter: a double-differential quadruple design with four 32-bit sigma-delta DACs per channel for PCM, and a separate True 1-Bit converter that takes DSD as a native bitstream rather than translating it to PCM.

The digital and analog halves are separated by T+A's DASS system, which isolates them galvanically with transformers, and the analog output is a double mono stage with RCA and XLR outputs. A two-stage de-jitter clock cleans the incoming signal and then re-clocks it from one of two local oscillators. Four selectable oversampling filters, including T+A's Bezier designs, let you tune the presentation to the recording.

The streaming board handles Tidal, Qobuz, Deezer, Amazon Music HD and HIGHRESAUDIO, with Tidal, Spotify and Qobuz Connect, AirPlay 2 and Audirvana, over Ethernet or Wi-Fi 6. The MP 2000 R G3 is the matching source for the PA 2000 R, and the MusicNavigator G3 app or SRC 1 remote controls both. We can arrange an audition in our Portland showroom and help with system matching, delivery and setup.

The R series began in 1992, when the Pulsar electronics T+A had built since 1986 evolved into a full line. The MP 2000 R G3 carries the separate PCM and DSD converters T+A introduced with the DAC 8 DSD in 2015 and the ASA G3 streaming architecture rolled out in the autumn of 2024, when the MP 2000 R G3, MP 2500 R G3, MP 3100 HV G3 and MP 200 G3 arrived with factory upgrades offered for earlier units. Read the T+A story →

Key technologies

  • Path Separation. PCM and DSD each get their own converter: a quadruple 32-bit sigma-delta array for PCM and a True 1-Bit stage for DSD.
  • DASS. Digital and analog sections are galvanically isolated by transformers, with a double mono analog output stage.
  • De-jitter master clock. A PLL cleans the source clock, then the converters switch to a local master oscillator.
  • ASA G3 streaming. Third-generation streaming architecture with native DSD over the network, Wi-Fi 6 and the Connect services.
  • CD mechanism. Floating sub-chassis drive in a resonance-damped aluminum housing.

The PA 2000 R is the MP 2000 R G3's matching amplifier; the MP 2500 R G3 adds the SACD mechanism.

Finishes

  • Silver anodized (43) brushed aluminum
  • Black anodized (42) brushed aluminum
Specifications
Type CD player, streamer, tuner and DAC
Disc formats CD-DA, CD-R, CD-RW, CD Text
PCM conversion Double-differential quadruple converter, four 32-bit DACs per channel, up to 384 kHz
DSD T+A True 1-Bit converter; DSD512 via USB, DSD256 from the network
Streaming Tidal, Qobuz, Deezer, Amazon Music HD, HIGHRESAUDIO, airable radio; Tidal, Spotify and Qobuz Connect, AirPlay 2, Audirvana; UPnP/DLNA
Tuner FM/FM-HD with RDS; DAB/DAB+ Band III
Bluetooth aptX HD, SBC, MP3 (A2DP, AVRCP 1.4)
Digital inputs 2 × coaxial, 2 × optical, USB device (asynchronous), 2 × USB host
Digital output 1 × coaxial (LPCM)
Analog outputs RCA 2.2 V / 50 Ω; XLR 4.4 V / 50 Ω
Signal-to-noise 110 dB; channel separation 110 dB; distortion < 0.001 %
Network Ethernet 10/100; Wi-Fi 802.11ax 2×2 MIMO
Remote SRC 1 included; MusicNavigator G3 app
Dimensions (H × W × D) 8.2 × 46 × 40 cm (3.2 × 18.1 × 15.7 in)
Weight 8 kg (17.6 lb)
Finishes Silver anodized (43) or black anodized (42)

T+A MP 2000 R G3 product page and specifications

Where it sits in the range

The R-Series is T+A's full-size line below the HV-Series. Siblings, least to most expensive:

The MP 2500 R G3 adds SACD playback and a taller, heavier chassis; the MP 2000 R G3 is otherwise the same platform.

Plan your T+A system with Pearl Audio

Pearl Audio is an authorized T+A dealer. We can arrange an audition in our Portland showroom and help with system matching, delivery and setup. Call (503) 222-2599 or email sales@pearlaudio.com.

Signature technologies

The engineering behind the T+A Elektroakustik T+A MP 2000 R G3 CD Player / Streaming DAC

T+A Elektroakustik gives its technologies names because each one solves a specific problem. Here is what each does, where it came from, why it matters in a system, and what you may hear.

PCM and DSD never meetSince 2015

Two converters: Quadruple PCM and True 1-bit DSD

Instead of converting DSD to PCM inside one chip, every current T+A converter carries two. PCM goes to eight 32-bit Burr-Brown sigma-delta chips, four per channel in a double-differential arrangement; DSD goes to a discrete one-bit converter of T+A's own design that never touches PCM, and relays switch between the two paths. Read the deep diveClose

What it does

T+A's converter layout dates from the DAC 8 DSD of about 2015, when Lothar Wiemann concluded that it was very difficult to preserve a true DSD signal path with ready-made chips. The PCM side is the Double-Differential-Quadruple-Converter: four 32-bit Burr-Brown sigma-delta converters per channel, run in conversion-only mode with T+A's own upsampling and filtering ahead of them, an arrangement T+A says lowers noise by 6 dB. The MP 3100 HV G3 feeds them at 352.8 or 384 kHz; the DAC 200 and PSD 3100 HV accept PCM to 768 kHz. The DSD side is the T+A True-1Bit converter, a discrete circuit that takes the native bitstream and oversamples it; T+A holds that DSD's advantages appear only when the signal is massively oversampled, and the reference converter upsamples DSD by 32 times. The DAC 200, HA 200 and SDX 3100 HV decode up to DSD 1024, or 49.2 MHz, a capability T+A introduced in the SD and SDV 3100 HV of March 2019 and calls the world's first DSD 1024-capable player; the PSD 3100 HV, MP 3100 HV G3, MP 2500 R G3, R 2500 R and Symphonia are specified to DSD 512. In 2026 T+A gave the arrangement a name, Path Separation Technology. The Symphonia uses a two-chip-per-channel Double Differential derivative of the PCM converter.

Why it matters in a system

A chip that handles DSD by first turning it into PCM, or the reverse, imposes one filter's character on both formats. Giving each its own converter means an SACD or a DSD file reaches the analog stage as the bitstream it was recorded as, and a PCM file is handled by a converter built for multi-bit data with T+A's own filters in front of it.

What you may hear

Herb Reichert, reviewing the MP 3100 HV G3 for Stereophile, wrote that the T+A's smooth, nuanced sigma-delta feels considerably different than dCS's liquidy FPGA-controlled Ring DAC, and called it CD playback at its highest imaginable level. Jim Austin heard treble that glistened, with no digital glare.

Four filters, no ringing, the listener's choiceSince 2015

Bézier oversampling filters and 56-bit DSP

T+A writes its own PCM oversampling in a signal processor instead of using the filters built into the converter chips: two FIR filters and two Bézier-polynomial filters, plus a non-oversampling mode, selectable by the owner. The Bézier filters avoid the pre- and post-ringing of conventional filters, and a third-order Bessel analog filter follows, switchable between 60 and 120 kHz. Read the deep diveClose

What it does

Every oversampling converter interpolates new samples between the ones on the disc or in the file, and the filter that does it leaves a signature; conventional linear-phase FIR filters ring before and after each transient. In the DAC 8 DSD T+A moved this work out of the converter chip and into a 56-bit signal processor running its own algorithms, and the current units offer five settings: FIR short, FIR long, Bézier/IIR, Bézier and NOS, or non-oversampling. Lothar Wiemann's point about the Bézier interpolation is that it has no pre-ringing and no post-ringing. In the reference converters a 16-times Bézier-polynomial filter takes 44.1 and 88.2 kHz material to 705.6 kHz and 48, 96 and 192 kHz material to 768 kHz before the Quadruple converter sees it. After conversion a phase-linear third-order Bessel filter, switchable between a 60 and a 120 kHz cut-off, removes what remains above the audio band without adding ringing of its own. The same processor and filter set run in the DAC 200 and HA 200, the MP 2000 R G3 and MP 2500 R G3, the R 2500 R, the PSD 3100 HV, the MP 3100 HV G3 and the SDX 3100 HV, so the choice an owner makes on a Series 200 converter is the same one offered on the reference.

Why it matters in a system

The reconstruction filter determines how a converter handles the leading edge of every note, and the ringing of a steep filter is one reason digital playback can sound hard. Letting the listener choose among FIR, Bézier and no oversampling, with an analog filter gentle enough to add nothing of its own, means the converter can be matched to the recording and to the rest of the system.

What you may hear

Jim Austin, in Stereophile on the MP 3100 HV: treble tones glisten like light reflected from the facets of a diamond, and also seem especially relaxed, with no digital glare. Craig Joyce at StereoNET called the DAC 200 a standout product that handles a wide range of music with clarity and precision.

A disc mechanism machined in Herford, not bought inSince 2019

In-house SACD transport and IPA Link

T+A builds its own disc transport: a linear-tracking laser block riding on two aluminum linear bearings inside a chassis machined from a single block of aluminum, with its own servo board, SACD decoder and control software. DSD leaves the transport as the native bitstream, and the IPA Link carries it, with its clock, to the matching converter. Read the deep diveClose

What it does

Most SACD players use a drive and decoder chipset made for Blu-ray players, and convert the disc's DSD to PCM before it goes anywhere. For the PDT 3100 HV of March 2019 T+A's engineers developed a decoder and drive mechanism from the ground up: a high-precision linear-tracking drive with a double laser, 658 nm for SACD and 790 nm for CD, a high-torque synchronous motor, an anti-resonance weight, a chassis cut from one aluminum block, two aluminum linear bearings, and a drawer that runs on stainless steel rails in PTFE and phosphor-bronze bearings. The servo board, SACD decoder and control software are T+A's own, written to deliver native DSD and PCM rather than converting DSD to PCM first; James Shannon's argument is that less error correction means greater accuracy of the decoding process. The mechanism alone weighs nearly 20 pounds. The High Res IPA Link is a proprietary connection, using low-voltage differential signalling, that transmits PCM and DSD data bit-accurately along with high-precision clocking, a constant bitstream of unchanged raw data, from the PDT 3100 HV to the SD, SDV and SDX 3100 HV. The same drive sits inside the MP 3100 HV G3 and the MP 2500 R G3, while the MP 2000 R G3, MP 200 G3 and R 2500 R use a slot-loading CD drive.

Why it matters in a system

A transport is the one part of a digital system that is still mechanical, and read errors, vibration and the conversion of DSD to PCM all happen before the converter can do anything about them. Owning the mechanism and the decoder lets T+A keep SACD native, and keep the drive in production and in service for as long as the player.

What you may hear

Robert Harley, reviewing the PDT 3100 HV with the SDV 3100 HV for The Absolute Sound, called it by far the smoothest and quietest transport he had encountered, with SACD playback vaulted into another realm. Herb Reichert found the MP 3100 HV G3 CD playback at its highest imaginable level.

Designed, programmed and certified in HerfordSince 2024

ASA G3: the in-house streaming architecture

T+A designs its own streaming hardware and software rather than buying a module. The third-generation Audiophile Streaming Architecture of 2024 is a quad-core board with Wi-Fi 6 and Gigabit Ethernet, native DSD streaming to DSD 256, Tidal, Spotify and Qobuz Connect, AirPlay 2 and Roon Ready, run from T+A's own MusicNavigator G3 app. Read the deep diveClose

What it does

Streaming boards are the part of a player most likely to be obsolete first, and most manufacturers buy them from one of a few suppliers. T+A keeps the whole chain in-house: design, PCB layout, certification, assembly, measurement, operating-system programming and app development. ASA G3 arrived on September 20, 2024 in the MP 2000 R G3 and MP 2500 R G3, in the MP 3100 HV G3 on October 18, 2024, and in the MP 200 G3 on November 28, 2024; Conradin Amft, then chief operating officer, described it as a core technology that the company would gradually implement in new products. The module streams DSD natively from the network for the first time in T+A's history; handles Tidal, Qobuz, Deezer, Amazon Music and HighResAudio, Tidal Connect, Spotify Connect and Qobuz Connect, AirPlay 2 and Roon Ready; and shares its control with the FM and DAB+ tuners the players also carry. The MusicNavigator G3 app is the controller; on the Caruso a seven-inch touchscreen runs T+A's own NavigatorOS instead. Owners of the earlier MP 3100 HV, MP 2000 R MK II, MP 2500 R and MP 200 can have their units upgraded to ASA G3 at the factory. The PSD 3100 HV, SDX 3100 HV, R 2500 R and Symphonia use the same module.

Why it matters in a system

A streamer that the manufacturer wrote itself is one the manufacturer can keep current, and the factory upgrade path shows what that means in practice: an MP 3100 HV bought in 2017 can be brought to the 2024 platform instead of being replaced. It also means the player, the app and the tuner behave as one product rather than as a module inside a box.

What you may hear

Stereophile on the R 2500 R: the app is the ideal interface, and the component just plays music and does it well. Killain Jones at SoundStage! found the R 2500 R effortlessly dynamic and able to produce deep, visceral bass.

Theory and application under one roofSince 1978

Designed, built and measured in Herford

Every T+A component is designed, assembled and measured at the company's own buildings in Herford, where it has been since 1988: circuit design, board layout, software, the MusicNavigator app, final assembly and a measurement protocol for every unit. Surface-mount board assembly is placed with a specialist using T+A-supplied parts; about 95 percent of production is in-house. Read the deep diveClose

What it does

T+A has occupied its own buildings in Herford since 1988 and added an administration, sales and laboratory building in 2003. A factory visit in April 2025 counted about 90 employees, 14 of them in research and development; T+A itself describes a team of fifteen designers and developers plus seven service technicians. The scope kept in-house runs from design, PCB layout and certification to assembly, measurement, operating-system programming and app development; the one step placed outside is surface-mount component placement, done by a specialist assembler using components T+A supplies, after which the boards return for final assembly and test. There are no assembly lines or automated placement machines, and nothing leaves the works without a measurement protocol. The company's own description is that it builds acoustic treasures rather than mass products, and it reports returning more than 98 percent of devices of any age to working condition when they come back for service. The engineering continuity is long: Lothar Wiemann, who joined as a student and developed the first electronics in 1982, was chief developer for 39 years before handing over to Jörg Küpper. In the United States, T+A North America in St. Marys, Georgia has handled distribution since August 2021, with service through Pyramid Audio in Austin and Audio Design and Service in Burbank.

Why it matters in a system

A product made in one place by the people who designed it can be supported for as long as its owner wants to keep it, and T+A's factory upgrades, the ASA G3 streaming boards fitted to players from 2017, are the practical form of that. It is also why a T+A system sounds consistent from the Series 200 to the HV line: the same small team designed all of it.

What you may hear

Jim Austin, in Stereophile on the MP 3100 HV: more than any other component he had had in his system, it radiated attention to detail. Michael Manousselis, who imported the brand to North America: they don't leave things to luck or to chance.

The Pearl Audio experience

How we work with you

A system at this level should be heard, thoughtfully matched, and properly set up. From the first audition to long-term ownership, you work with the same people, in person.

  1. 01

    Listen first

    The T+A MP 2000 R G3 CD Player / Streaming DAC is not in our rooms at present. When it is the right piece for a client we arrange a demonstration unit from the manufacturer and set it up for a private session.

  2. 02

    Placement and setup advice

    Ask us about placement, connections, ventilation and system configuration, and about delivery.

  3. 03

    Support for as long as you own it

    We support everything we sell for as long as you own it, whether the answer comes by phone, in the shop, or through factory service.

  4. 04

    A path for what comes next

    Trade-in assistance and qualifying 100% Trade-Up options give you flexibility when your listening priorities or your system change.

Search