← Back to your LP12 build

Hana · S Series MK II

Hana SH MK II

$850

Trade-in availableSignature technologiesThe Hana story

Not currently in our rooms. For a serious buyer we will often bring a piece in from the manufacturer for a private session — tell us about your system and what you are weighing it against, and we will advise.

Hana · S Series MK II

A high-output Shibata moving coil with the cryogenic treatment, tapered cantilever and heavier damped body of Hana's dearer models, built to run straight into a moving magnet phono input.

Current production is the MK II version.

2 mV
output, MM-input compatible
Shibata
nude diamond stylus
2.0 g
tracking force
8.6 g
weight

Authorized Hana dealer · Delivery and installation by Pearl Audio · Trade-ins welcome

The story

The S Series MK II is master designer Masao Okada's update to Hana's best-selling cartridges. The headline change is a new tapered aluminum cantilever with higher rigidity and less mass at the tip, carrying the same nude diamond Shibata stylus. The yoke, pole pieces and gold-plated terminal pins are now cryogenically treated, a process borrowed from the Umami Red, Umami Blue and ML. The body is reshaped along the lines of the M Series, damped with a matte soft-feel black elastomeric paint, and topped with a brass cap that carries threaded mounting holes. That cap raises the weight from the original's 5 g to 8.6 g, which Hana says gives better coupling and compatibility with a wider range of tonearms. The SH MK II keeps the 2 mV output, 130 Ω coil and 47 kΩ load of the original SH, so it works with the majority of MM phono inputs.

Alan Sircom of Hi-Fi+ heard a cartridge that leads from the midrange out, slightly warmer and more mellifluous than the Umami Red without turning lush, with excellent articulation on vocals and guitars and a good sense of rhythm and flow. He put it at the head of its class and found it a particularly good partner for a turntable like the Technics SL-1300G. Mono & Stereo gave it an Editor's Choice award. Use the SH MK II with any decent MM phono stage or built-in phono input; no step-up or MC gain is needed. At 8.6 g with a compliance of 10 × 10⁻⁶ cm/dyne it is a medium-compliance cartridge for medium-mass arms. The Shibata profile rewards careful alignment and a tonearm with adjustable height, and we are happy to install it for you.

The SH MK II sits between the EH and the MH as Hana's mid-range high-output cartridge. On a trade-in, Musical Surroundings takes 30% off a new SH MK II for a worn SH, 20% off for any other Hana, Clearaudio or DS Audio cartridge, and 10% off for any other brand.

The Shibata SL and SH were among the first four Hanas of 2015, built by Excel Sound, the Yokohama company Masao Okada founded in 1970 after years as the anonymous supplier behind Japan's largest cartridge brands. The S Series MK II of September 2024 brought the M Series ideas down to Hana's best sellers: the tapered cantilever, cryogenic treatment, the Delrin-and-brass body and, on the SL, the 8-ohm generator. Read the Hana story →

Key technologies

  • Shibata stylus. A nude diamond Shibata, the line-contact profile that traces the groove more closely than an elliptical.
  • Tapered aluminum cantilever. New for MK II: higher rigidity and less mass at the tip.
  • Cryogenic treatment. The yoke, pole pieces and gold-plated terminal pins are cryogenically treated, a process borrowed from the Umami Red, Umami Blue and ML.
  • Damped body with brass cap. Reshaped along M-series lines, finished in soft-feel elastomeric paint, with a brass cap that carries threaded mounting holes and takes the weight to 8.6 g.
  • Alnico magnet. Hana's Alnico generator; the SL MK II uses the 8 Ω low-impedance winding from the ML and Umami Blue.

The SL MK II is the low-output version for a moving-coil input; the MH is the next high-output step.

Specifications
Type High-output moving coil (MC), for MM phono inputs
Output 2 mV at 1 kHz
Internal impedance 130 Ω at 1 kHz
Recommended load 47 kΩ
Tracking force 2.0 g (70 µm trackability at 2 g)
Compliance 10 × 10⁻⁶ cm/dyne
Weight 8.6 g
Stylus Nude diamond Shibata
Cantilever Tapered aluminum
Magnet Alnico
Frequency response 15 Hz – 32 kHz
Channel separation / balance 28 dB at 1 kHz / within 1.5 dB
Body Black, soft-feel elastomeric paint, brass cap with threaded mounts
Also available Hana SL MK II (0.4 mV low-output version) and SL Mono MK II

Hana SH MK II product page and specifications

Rebuilds and trade-in

Hana trade-in and re-tip exchange (Musical Surroundings). Trade in a worn SH or SH MK II and a new one is 30% off ($595). Trade in any other Hana, Clearaudio or DS Audio cartridge and it is 20% off ($680); any other brand's cartridge earns 10% off ($765).

Hana re-tip exchange — SH or SH MK II for a new SH MK II $595 (Hana does not retip; your worn cartridge is exchanged for a new one at 30% off)
Trade in your Hana SH $595 after trade-in (credit $255)
Trade in your Hana SH MK II $595 after trade-in (credit $255)
Trade in your Hana EH $680 after trade-in (credit $170)
Trade in your Hana EL $680 after trade-in (credit $170)
Trade in your Hana EH MK II $680 after trade-in (credit $170)
Trade in your Hana EL MK II $680 after trade-in (credit $170)
Trade in your Hana SL $680 after trade-in (credit $170)
Trade in your Hana SL MK II $680 after trade-in (credit $170)
Other Hana cartridges 6 more models qualify; use the trade-in selector on this page or ask us

The 30% re-tip exchange is Hana's replacement for retipping: a worn cartridge of the same series (working or not) is exchanged for a new one. Trade-ins of Musical Surroundings brands (Hana, Clearaudio, DS Audio) need an RA number and must arrive within 30 days of the invoice; other brands need an emailed photograph first. The Umami Blue and Red take other-brand trades only when the trade is worth more than $1,000 retail. Verified 2026-10-28. Source: Hana dealer price list, January 2026 (Musical Surroundings).

Where it sits in the range

The Hana cartridges Pearl Audio stocks, from least to most expensive:

  • Hana EH: entry high-output MC, 2 mV for MM inputs
  • Hana EL: entry low-output MC, 0.5 mV, elliptical
  • Hana SH MK II (this model)
  • Hana SL MK II: best-selling Shibata low-output MC, 0.4 mV
  • Hana SL Mono MK II: true mono Shibata MC, 0.4 mV
  • Hana MH: Microline high-output MC, 2 mV for MM inputs
  • Hana ML: Microline low-output MC, 0.4 mV, Umami Blue generator
  • Hana Umami Blue: Alnico Umami, boron cantilever, 0.4 mV
  • Hana Umami Red: samarium-cobalt Umami, ebony and duralumin, 0.4 mV
  • Hana Umami Black: flagship, diamond cantilever, neodymium OKD generator, 0.3 mV

Plan your Hana system with Pearl Audio

Pearl Audio is an authorized Hana dealer. Arrange an audition in our Portland showroom, and ask us about trade-in pricing against your current cartridge. Call (503) 222-2599 or email sales@pearlaudio.com.

Signature technologies

The engineering behind the Hana SH MK II

Hana gives its technologies names because each one solves a specific problem. Here is what each does, where it came from, why it matters in a system, and what you may hear.

Elliptical, Shibata, Microline; aluminum, boron, diamondSince 2015

The stylus and cantilever ladder

Each step up the Hana range changes the two parts that touch the record: the diamond and the rod that carries it. The E Series uses an elliptical stylus on an aluminum cantilever, the S a nude Shibata on tapered aluminum, the M a nude Microline on aluminum, the Umami Blue and Red a Microline on solid boron, and the Umami Black a Microline on a diamond cantilever. Read the deep diveClose

What it does

The stylus profile decides how much of the groove wall the diamond reads. The E Series carries a synthetic elliptical, the simplest shape and the one most tolerant of setup. The S Series moves to a nude natural-diamond Shibata, a line-contact profile with a taller, narrower footprint; Hi-Fi News credits Excel Sound with mounting a Shibata on a crimped, stiffened alloy cantilever to lower tip mass. The M Series and the three Umami models use a nude Microline, the narrowest line contact, which Hana describes as mimicking the cutting stylus and fitting more precisely into the groove. The cantilever ladder runs alongside. The E and M use aluminum pipe; the S Series MK II of 2024 and the E Series MK II of 2026 use a tapered aluminum rod that Hana says is stiffer and has less effective mass at the tip, and Masao Okada called it the biggest change in the SL MK II. The Umami Blue and Red carry the Microline on solid boron, which Hana's brochure describes as about as hard as diamond and able to carry fine detail and micro-dynamics to the generator without loss. The Umami Black of 2025 is the first Hana with a diamond cantilever. The cantilever and stylus assemblies come from Orbray, formerly Adamant Namiki.

Why it matters in a system

A stiffer, lighter cantilever bends less between the stylus and the coils, so more of what the diamond traces reaches the generator and less is lost as flex or stored as resonance. A narrower line contact reads more of the high-frequency detail cut into the groove and wears records less, provided it is aligned with care. Line-contact profiles reward a well-set tonearm and clean records, which is part of what Pearl does at installation.

What you may hear

Andre Jennings of The Absolute Sound found the Shibata SL and SH to be models of sonic purity with very low perceived distortion. Herb Reichert of Stereophile wrote that the SL excavated more microscale information than the EL, especially in the high frequencies, and The Absolute Sound heard the tapered-cantilever SL MK II move a few steps closer to neutral.

And the OKD generator of the Umami BlackSince 2015

Alnico, samarium-cobalt and neodymium magnets

Most Hanas are built around Alnico, the aluminum-nickel-cobalt magnet of classic cartridges, chosen for its tonal character rather than its strength. The Umami Red moves to samarium-cobalt, and the Umami Black to a neodymium magnet inside a new generator, named OKD for Masao Okada, whose yoke both shapes the field and supports the diamond cantilever. Read the deep diveClose

What it does

A moving-coil cartridge is a tiny generator: coils on an armature swing in the field of a fixed magnet, and the magnet's material sets both the strength and the shape of that field. Hana's E, S and M Series and the Umami Blue use Alnico, which Musical Surroundings describes as less powerful than modern magnets, and which Hana keeps for the way it sounds; The Absolute Sound called the result a meeting of old and new. The EL MK II of 2026 retains the classic Alnico magnet behind its updated coil. The Umami Red of 2020 is the first Hana to use a rare-earth magnet, samarium-cobalt, in a pure-iron magnetic circuit with a square-plate Permalloy armature. The Umami Black of 2025 goes further: a neodymium N40 magnet, a 2 mm square hybrid carbon-permalloy armature hand-wound with 30-micron 4N copper, and the OKD generator, in which the rear pole piece and yoke are made as a single part and an inverted-U front yoke supports the cantilever while aligning the field, so that the mechanical path from the stylus and the magnetic path through the coils are handled by the same structure. Hana says the Black is much more than an Umami Red with a diamond cantilever, and its output is 0.3 mV at 5 ohms.

Why it matters in a system

The magnet decides how much signal the coils make for a given motion and how linear that field is across the coil's travel. Alnico gives Hana a sound many listeners associate with the great cartridges of the 1960s and 1970s at a modest price; rare-earth magnets give the Umami Red and Black more field from the same space, and the OKD yoke brings resonance control and field alignment into one part.

What you may hear

Herb Reichert of Stereophile linked the Alnico SL to a black background, seductively rendered top octaves and exquisite inner detail. Andre Jennings of The Absolute Sound found the Umami Black neither warm nor rolled-off, leaning toward clarity, resolution and tone color rather than ultimate bass slam.

Yokes, pole pieces and pins frozen near absolute zeroSince 2018

Cryogenic cold annealing

Since the M Series of 2018, Hana has frozen the iron parts of the magnetic circuit, the front yoke, pole pieces and rear magnetic parts, and the gold-plated terminal pins, to near absolute zero. Hana calls the process cold annealing and says it gives a more even magnetic field and better conductivity. It now covers the entire range. Read the deep diveClose

What it does

Cryogenic treatment takes a finished metal part down to a temperature near absolute zero and brings it back slowly. Hana's description is that the process restructures the metal at the molecular level, relaxing the stresses left by machining and forming so that the grain is more uniform. In a cartridge the parts that matter are the ones that carry magnetic flux, the yokes and pole pieces around the coils, and the ones that carry the signal out, the terminal pins. Hana introduced the treatment on the ML and MH in October 2018, applying it to the front yoke and the center and rear magnetic parts, and the press release claimed a more precise and controlled flux field for greater linearity. The Umami Red of 2020 extended it to the yokes, the pole piece and the 24-karat gold-plated pins, and the Umami Black treats the whole generator and its gold-plated brass pins. The S Series MK II of 2024 brought cryo-treated yokes, pole pieces and pins to the SL, SH and SL Mono, and the E Series MK II of 2026 completed the range; Hana's own page for the EL MK II says the same treatment is used across the Umami Series and the entire Hana range.

Why it matters in a system

The field in the gap is what the coils move through, and any unevenness in it becomes distortion that no phono stage can remove. A yoke with a more uniform grain carries flux more evenly, and a pin with better conductivity loses less of a signal that is only a few tenths of a millivolt. The treatment is one reason the M Series and everything after it measure and sound more alike across the range.

What you may hear

Alan Sircom of hi-fi+ found the ML and MH brilliant in detail resolution and beautiful in tonal balance, and Herb Reichert of Stereophile called the ML a stunning-sounding, artfully engineered phono invention. In the Umami Black, AnalogPlanet reported the treated pins are intended for enhanced conductivity and reduced distortion.

The body as a brace, and as a finishSince 2018

Delrin and brass, Duralumin, inlays and Urushi

The M Series introduced an injection-molded Delrin body with a machined brass cap and threaded mounting holes, now shared by the S and E Series MK II. The Umami models are built around an Auricle body machined from A7075 Duralumin that braces an open-air generator, finished with an ebony inlay and red Urushi lacquer on the Red, a white POM inlay and blue enamel on the Blue, and black Urushi on the Black. Read the deep diveClose

What it does

The first Hanas had molded ABS bodies. The ML and MH of 2018 replaced that with a body injection-molded from Delrin, the acetal polymer Hana calls a high-tech resonance-damping material, closed by a machined brass top cap with threaded inserts, so the cartridge bolts to the headshell without nuts and the two dissimilar materials damp each other; the result weighs 9.5 g. The S Series MK II of 2024 and E Series MK II of 2026 adopted the same construction under a soft-feel elastomer coating. For the Umami Red of 2020, Okada designed the Auricle body, named for the shape of the outer ear and CNC-machined from A7075 Duralumin, which braces a generator that otherwise sits in open air; its purpose, he said, is to suppress unnecessary body resonance. The Red carries an ebony front inlay and a multi-layer Urushi lacquer in the Makie tradition: a black undercoat, a red layer carrying silver powder, the Hana lettering in gold powder, and clear coats polished in stages. The Umami Blue of 2023 uses the same body with a white POM inlay, in homage to the ML, and a glossy blue enamel applied by a melamine thermosetting process. The Umami Black of 2025 is finished in black Urushi applied by vapor deposition and thermoset at 120 degrees Celsius.

Why it matters in a system

A cartridge body has two jobs: hold the generator still relative to the headshell, and get out of the way of the signal. Plastic alone flexes and rings; a machined metal shell with a dissimilar cap or inlay stores less energy and releases it as heat rather than as a resonance the coils can hear. The finish is the visible sign of the care underneath, and on the Umami models it is a traditional Japanese craft.

What you may hear

Alan Sircom of hi-fi+ marked the ML down for a body material he felt lacked the character of dearer housings, and then called the Umami Red that rare jewel in phono cartridges. David Price of StereoNET described the Red's midband as explicitly ordered and forensic, throwing out vast amounts of information from the groove.

All Hana technologies and the company story

The Hana story

Moving-coil cartridges designed by Masao Okada and built by hand at Excel Sound in Yokohama, from the EL to the Umami.

Founded 1970 in Tokyo, Japan; Excel Sound now builds every Hana in Yokohama by Masao Okada · hanacartridges.com

Milestones

  1. 1970 Excel Sound Corporation Masao Okada, who began researching phono cartridge design in 1964, opens the Excel factory in Tokyo. The company's first products under its own name are the ES-70 line, initially six models; today it works from Yokohama.
  2. 1975 The OEM years From 1975 through the 1980s Excel builds moving-magnet cartridges for Pioneer, Trio (Kenwood), Sansui and Sanyo, more than 50,000 a month at the peak of the vinyl boom, and later moving coils for Sumiko and other brands that keep their supplier anonymous.
  3. 1982 Surviving the compact disc As LP demand falls, Excel keeps a small OEM cartridge business and diversifies into low-priced audio and video accessories, which carries the company through the years vinyl was declared dead.
  4. 2015 Hana Hiroshi Ishihara of Youtek reconnects with Okada and the Hana line, meaning brilliant and gorgeous, is developed for export: the elliptical EL and EH and the Shibata SL and SH, each in low- and high-output versions. Stereophile reviews the EL in August 2016; The Absolute Sound covers all four in March 2017.Hana EL
  5. 2018 SL Mono and the M Series The SL Mono adds a mono cartridge in the spring, and in October the ML and MH introduce the Microline stylus, the Delrin-and-brass body, cryogenic treatment and the 8-ohm pure-copper generator. hi-fi+ names the ML Phono Cartridge of the Year for 2019.Hana ML
  6. 2020 Umami Red Announced August 3 and on sale September 22 at $3,950: boron cantilever, samarium-cobalt magnet, a Duralumin Auricle body with ebony inlay and red Urushi lacquer. hi-fi+ Cartridge of the Year 2020 and Stereophile Class A.Hana Umami Red
  7. 2023 Umami Blue The Red's body and boron cantilever over the ML's Alnico generator, at $2,500, with a white POM inlay and blue enamel. The Absolute Sound gives it a Golden Ear Award.Hana Umami Blue
  8. 2024 S Series MK II The SL MK II, SH MK II and SL Mono MK II arrive in September at $850 with a tapered aluminum cantilever, the 8-ohm generator, cryogenic treatment and the M-Series body. The SH MK II goes on to win hi-fi+'s 2026 cartridge award.Hana SL MK II
  9. 2025 Umami Black Announced September 3 at $11,500: the first Hana with a diamond cantilever, a neodymium magnet and the OKD generator named for Okada, in black Urushi. In October an Umami Fest in Healdsburg, California gathers participants from six countries, with Okada present.Hana Umami Black
  10. 2026 E Series MK II On September 1 the EL MK II and EH MK II, at $550, replace the original entry models with the M-Series body, cryogenic treatment and, on the EL, the 8-ohm generator. Okada still designs every Hana and his builders still train for five to ten years.
Read the Hana story
Hana Umami Red

Masao Okada began researching phono cartridge design in 1964 and opened the Excel factory in Tokyo in 1970; the company he founded, Excel Sound Corporation, works today from Yokohama. Its first products under its own name were the ES-70 line, initially six models. The business that followed was mostly anonymous. From 1975 through the 1980s Excel built moving-magnet cartridges for Pioneer, Trio (Kenwood), Sansui and Sanyo, and at the peak of the first vinyl boom it was shipping more than 50,000 units a month, which Hi-Fi News later summarized as once the go-to supplier of high-quality moving magnets. Moving-coil designs followed, and the company became the builder of cartridges for Sumiko, with different magnets, yokes and coil formers from anything it would later sell as its own.

Demand for records fell after the compact disc arrived in 1982. Excel kept a small cartridge business for brands that preferred not to name their supplier and diversified into low-priced audio and video accessories, which is how it survived the years when vinyl was declared dead. In 2015 Hiroshi Ishihara of Youtek Corporation reconnected with Okada, and the two developed a line for export under the name Hana, the Japanese word 華, which the company translates as brilliant and gorgeous. The first four models were the EL and EH, with elliptical styli, and the SL and SH, with Shibata diamonds, each in a low-output version for moving-coil inputs and a high-output version for moving-magnet inputs. Herb Reichert reviewed the EL in Stereophile in August 2016, and The Absolute Sound covered all four in March 2017 at $475 and $750. Musical Surroundings of Oakland, California, became the US distributor.

The SL Mono of 2018 added a mono cartridge at $750. In October 2018 the M Series introduced the ideas that define the current range: a nude Microline stylus, a Delrin body with a brass cap, cryogenic treatment of the magnetic circuit, and an 8-ohm generator wound with thicker copper. hi-fi+ named the ML its Phono Cartridge of the Year for 2019. The Umami Red followed, announced on August 3, 2020 and on sale from September 22 at $3,950, with a boron cantilever, a samarium-cobalt magnet, a Duralumin body, an ebony inlay and red Urushi; its name, the fifth taste, was suggested by Garth Leerer of Musical Surroundings. It was hi-fi+'s Cartridge of the Year for 2020 and Stereophile Class A. The Umami Blue of March 2023, at $2,500, put the Red's body and cantilever over the ML's Alnico generator and won a Golden Ear from The Absolute Sound.

In September 2024 the S Series became the SL MK II, SH MK II and SL Mono MK II at $850, with a tapered aluminum cantilever, the 8-ohm generator, cryogenic treatment and the M-Series body; the original SL was cut to $600 and built for about six more months. The Umami Black, announced September 3, 2025 at $11,500, brought a diamond cantilever, a neodymium magnet and the OKD generator named for Okada, and that October an Umami Fest in Healdsburg, California gathered the brand's partners from six countries, with Okada present. The SH MK II won hi-fi+'s 2026 cartridge award, and on September 1, 2026 the E Series MK II, at $550, replaced the original entry models. Okada remains owner and president and designs every Hana; two of his craftsmen have been at Excel Sound for thirty to forty years. Pearl Audio carries the range in Portland.

The complete Hana story and technology library

Hana at Pearl Audio

Pearl Audio is an authorized Hana dealer in Portland, carrying the range from the entry E Series through the S Series MK II, SL Mono MK II and M Series to the Umami Blue, Red and Black. Because every series below the Umami comes in a low-output and a high-output winding, we start with the phono stage and tonearm you own and recommend the model that suits them, whether that is an MH into a moving-magnet input or an SL MK II at 80 ohms into a moving-coil stage. We install and align the cartridge in your arm, set tracking force and loading, and can advise on the step up from one series to the next when the time comes.

Ownership

Rebuilds, exchange and trade-in

Trade in a worn SH or SH MK II and a new one is 30% off ($595). Trade in any other Hana, Clearaudio or DS Audio cartridge and it is 20% off ($680); any other brand's cartridge earns 10% off ($765).

Hana trade-in and re-tip exchange (Musical Surroundings)

Trade-in credit
—
Your price after trade-in
$850

Credit is 20% of the new cartridge’s price for a worn SH or SH MK II at 30%; any Hana, Clearaudio or DS Audio cartridge at 20%; any other brand at 10%. The 30% re-tip exchange is Hana's replacement for retipping: a worn cartridge of the same series (working or not) is exchanged for a new one. Trade-ins of Musical Surroundings brands (Hana, Clearaudio, DS Audio) need an RA number and must arrive within 30 days of the invoice; other brands need an emailed photograph first. The Umami Blue and Red take other-brand trades only when the trade is worth more than $1,000 retail. Verified 2026-10-28.

Ask us about this trade-in

Factory rebuild and retip

ServicePrice
Hana re-tip exchange — SH or SH MK II for a new SH MK IIHana does not retip; your worn cartridge is exchanged for a new one at 30% off $595

Pricing per Hana - 2026-01 - Dealer Price List (Musical Surroundings, January 2026) and musicalsurroundings.com/faq. Programs are set by the manufacturer and may change.

The Pearl Audio experience

How we work with you

A system at this level should be heard, thoughtfully matched, and properly set up. From the first audition to long-term ownership, you work with the same people, in person.

  1. 01

    Listen first

    The Hana SH MK II is not in our rooms at present. When it is the right piece for a client we arrange a demonstration unit from the manufacturer and set it up for a private session.

  2. 02

    Delivery and installation

    We deliver and install throughout the Portland area, taking care of placement, connections, ventilation and system configuration ourselves.

  3. 03

    Support for as long as you own it

    We support everything we sell for as long as you own it, whether the answer comes by phone, in your home, or through factory service.

  4. 04

    A path for what comes next

    Trade-in assistance and qualifying 100% Trade-Up options give you flexibility when your listening priorities or your system change.

Search