The N20 is the point in Aurender's range where the company's server architecture is complete in one chassis. Aurender builds music servers rather than streamers in the usual sense: a low-power Intel quad-core processor and 8 GB of memory run a dedicated Linux-based operating system, music is read from the drives or the network into a 480 GB NVMe cache and played from solid-state memory, so that the spinning disk or the Ethernet port is idle during playback, and the digital output board is a separate, isolated piece of hardware fed by its own power supply. Stephen Scharf, reviewing the N20 for The Absolute Sound, gave it his "highest possible recommendation" and called it among the "best-sounding audio components I have ever had the pleasure to use", with "a jet-black background devoid of digital hash, grit, or grain"; the magazine has listed it as an Editors' Choice since.
The output board is what separates the N20 from the N200 below it. The AES/EBU, coaxial RCA, BNC and optical outputs are governed by an oven-controlled crystal oscillator, with an FPGA-based all-digital phase-locked loop reclocking the data, so the N20 drives a DAC's S/PDIF or AES input with a timing reference of its own rather than relying on the DAC to recover a clock from the stream. A 75 Ω BNC word clock input accepts 10 MHz and 12.8 MHz references and 44.1 and 48 kHz multiples from 1× to 512×, so an Aurender MC10 or MC20 master clock, or a dCS clock, can govern the N20 and the DAC together. The USB output, which carries PCM to 32-bit/768 kHz and DSD512 natively, is on a board physically and electrically isolated from the processor, and the AES and S/PDIF outputs handle PCM to 24-bit/192 kHz and DSD64 over DoP, with optional upsampling of lower-rate material to 176.4 or 192 kHz and FPGA conversion of DSD to PCM for DACs that need it. USB stays bit-perfect.
Power is a hybrid linear design with an integrated uninterruptible supply built on supercapacitors, so a mains interruption lets the N20 shut down cleanly rather than corrupt its database; a separate linear chain feeds the display, processor and other non-audio circuits, and Aurender rates the supplies at 50 W for the processor and 2 × 35 W for the output board. The Gigabit Ethernet port is isolated through two layers of transformers, there is no Wi-Fi radio, and two USB 3.0 ports accept external drives or a NAS share. The 8.8 inch, 1920 × 480 IPS display shows album art and track data and switches off in Critical Listening Mode, which also idles the buttons and non-essential background tasks. The chassis is machined aluminum, 16.9 inches wide and 29.8 lb.
Don Shaulis, reviewing the N20 for Stereo Times, found that "it is faithful to the source and won't make a poor recording magically better", which is the right expectation for a server whose job is to deliver bits with the least noise and the best timing, and concluded that each component in his system "sounds the best I have ever heard" through it; he noted that the N20 carries almost all the hardware of the two-box N30 at half the price. Control is through Aurender's Conductor app for iPad, iPhone and Android, which Aurender provides without subscription and updates several times a year: TIDAL, Qobuz, internet radio, Spotify Connect and AirPlay are built in, the N20 is Roon Ready, and an MQA Core decoder is available as an upgrade. Aurender's remote-support function lets the factory diagnose a unit over the internet.
Within Aurender's digital-output servers the
N200 below it shares the isolated USB and S/PDIF outputs in a less elaborate power and clocking arrangement, and the
N300X moves the supply to a second chassis; above the N20 the
N30SA separates the audio and processing sections into two boxes and the
N50 is the reference. The
MC10 and
MC20 master clocks connect to the N20's word clock input, and the
NH10 network switch sits upstream of it. For a system that needs analog outputs, the A20 and A30 add a DAC in the same chassis family.
We plan the N20 as the source for dCS Bartók and Rossini, Luxman and Boulder DACs, connected over AES/EBU where the DAC accepts it so the N20's clock does the work, and over USB for DSD and high-rate PCM, with an HRS M3X2 base under it. Arrange an audition in our Portland showroom and bring a drive of your own files to hear through the Conductor app.