← Back to your LP12 build

T+A Elektroakustik · Series 200

T+A Elektroakustik T+A MP 200 G3 CD / Streaming Transport

$8,250

Signature technologies

Not currently in our rooms. For a serious buyer we will often bring a piece in from the manufacturer for a private session — tell us about your system and what you are weighing it against, and we will advise.

T+A Elektroakustik · Series 200

The MP 200 G3 is the Series 200 source: a slot-loading CD player, third-generation streaming client, FM/FM-HD/DAB+ tuner and aptX HD Bluetooth in a 32 cm case, designed to feed the DAC 200 or HA 200 over SYS-Link.

Includes the FM200 remote. Designed as a digital source for the DAC 200 or HA 200.

CD + streaming
slot-loading drive, G3 streaming board
384 kHz
PCM; DSD256 from the network
FM / DAB+
with FM-HD
4.4 kg
9.7 lb
Options and pricing

Authorized T+A Elektroakustik dealer · Delivery and installation by Pearl Audio · Trade-ins welcome

The story

The MP 200 G3 collects every digital source except the converter into one compact box. A slot-loading CD mechanism with fast access and strong error correction plays CD, CD-R and CD-RW. The third-generation streaming boards handle Gigabit Ethernet and Wi-Fi 6, play PCM to 384 kHz and DSD to DSD256 from the network, and carry Tidal, Qobuz, Deezer, Amazon Music HD and HIGHRESAUDIO plus the Connect services and AirPlay 2. A sensitive tuner with a digital IF stage covers FM, FM-HD and DAB+, and Bluetooth with aptX HD takes a phone.

Conversion is left to the DAC 200 or HA 200, which it feeds over a coaxial digital output and T+A's SYS-Link, so the two boxes share control data and act as one. Two coaxial and one optical input let the MP 200 G3 switch other digital sources, and the MusicNavigator app becomes the control center for the whole Series 200 stack.

With a DAC 200 and A 200, or an HA 200 for headphones, the MP 200 G3 completes the system. We can arrange an audition in our Portland showroom and help with system matching, delivery and setup.

The MP 200 arrived with the Series 200 on September 17, 2021, and in the autumn of 2024 it became the MP 200 G3 when T+A rolled out ASA G3, the third generation of its in-house streaming architecture, across the MP 2000 R G3, MP 2500 R G3, MP 3100 HV G3 and MP 200 G3, with factory upgrades for earlier units. Like every T+A it is designed, built and measured in Herford. Read the T+A story →

Key technologies

  • ASA G3 streaming. Third-generation boards with Wi-Fi 6, Gigabit Ethernet and native DSD from the network.
  • Slot-loading CD drive. Fast access times and strong error correction in a drive sized for the chassis.
  • Digital tuner. High sensitivity with a digital IF stage and demodulation for FM, FM-HD and DAB+.
  • aptX HD Bluetooth. Near-lossless Bluetooth from phones and tablets.
  • SYS-Link. Routes audio and control to the DAC 200 or HA 200 so the pair behaves as one unit.

The DAC 200 or HA 200 is the converter the MP 200 G3 feeds over SYS-Link.

Finishes

  • Alu silver anodized (43)
  • Alu black anodized (42)
Specifications
Type CD player, streaming client and tuner (digital source)
Disc formats CD-DA, CD-R, CD-RW, CD Text; 2 Hz – 20 kHz / 100 dB
Streaming PCM 32 – 384 kHz 16/24 bit, DSD64/128/256; MP3, AAC, OGG, FLAC, WAV, AIFF, ALAC; Tidal, Qobuz, Deezer, Amazon Music HD, HIGHRESAUDIO, airable; Connect services, AirPlay 2
Tuner FM 87.5 – 108 MHz with RDS; FM-HD; DAB/DAB+ Band III
Bluetooth aptX HD, AAC, MP3, SBC
Digital inputs 2 × coaxial (192 kHz), 1 × optical (96 kHz)
Digital outputs Coaxial (IEC 60958), SYS-Link, USB-SYS
Analog outputs None (digital source; conversion in DAC 200 or HA 200)
Network Gigabit Ethernet; Wi-Fi 802.11ax 2×2 MIMO
Remote FM200 included; MusicNavigator app
Dimensions (H × W × D) 10 × 32 × 34 cm (3.9 × 12.6 × 13.4 in)
Weight 4.4 kg (9.7 lb)
Finishes Alu silver anodized (43) or alu black anodized (42)

T+A MP 200 G3 product page and specifications

Where it sits in the range

Series 200 is T+A's compact line. Siblings, least to most expensive:

  • T+A M 200: 210 W into 8 Ω mono amplifier, price each
  • T+A A 200: 125 W into 8 Ω stereo amplifier
  • T+A MP 200 G3 (this model)
  • T+A DAC 200: DAC and preamplifier
  • T+A HA 200: headphone amplifier and DAC

The DAC 200 or HA 200 provides the conversion; the A 200 or M 200 the power.

Plan your T+A system with Pearl Audio

Pearl Audio is an authorized T+A dealer. We can arrange an audition in our Portland showroom and help with system matching, delivery and setup. Call (503) 222-2599 or email sales@pearlaudio.com.

Signature technologies

The engineering behind the T+A Elektroakustik T+A MP 200 G3 CD / Streaming Transport

T+A Elektroakustik gives its technologies names because each one solves a specific problem. Here is what each does, where it came from, why it matters in a system, and what you may hear.

A disc mechanism machined in Herford, not bought inSince 2019

In-house SACD transport and IPA Link

T+A builds its own disc transport: a linear-tracking laser block riding on two aluminum linear bearings inside a chassis machined from a single block of aluminum, with its own servo board, SACD decoder and control software. DSD leaves the transport as the native bitstream, and the IPA Link carries it, with its clock, to the matching converter. Read the deep diveClose

What it does

Most SACD players use a drive and decoder chipset made for Blu-ray players, and convert the disc's DSD to PCM before it goes anywhere. For the PDT 3100 HV of March 2019 T+A's engineers developed a decoder and drive mechanism from the ground up: a high-precision linear-tracking drive with a double laser, 658 nm for SACD and 790 nm for CD, a high-torque synchronous motor, an anti-resonance weight, a chassis cut from one aluminum block, two aluminum linear bearings, and a drawer that runs on stainless steel rails in PTFE and phosphor-bronze bearings. The servo board, SACD decoder and control software are T+A's own, written to deliver native DSD and PCM rather than converting DSD to PCM first; James Shannon's argument is that less error correction means greater accuracy of the decoding process. The mechanism alone weighs nearly 20 pounds. The High Res IPA Link is a proprietary connection, using low-voltage differential signalling, that transmits PCM and DSD data bit-accurately along with high-precision clocking, a constant bitstream of unchanged raw data, from the PDT 3100 HV to the SD, SDV and SDX 3100 HV. The same drive sits inside the MP 3100 HV G3 and the MP 2500 R G3, while the MP 2000 R G3, MP 200 G3 and R 2500 R use a slot-loading CD drive.

Why it matters in a system

A transport is the one part of a digital system that is still mechanical, and read errors, vibration and the conversion of DSD to PCM all happen before the converter can do anything about them. Owning the mechanism and the decoder lets T+A keep SACD native, and keep the drive in production and in service for as long as the player.

What you may hear

Robert Harley, reviewing the PDT 3100 HV with the SDV 3100 HV for The Absolute Sound, called it by far the smoothest and quietest transport he had encountered, with SACD playback vaulted into another realm. Herb Reichert found the MP 3100 HV G3 CD playback at its highest imaginable level.

Designed, programmed and certified in HerfordSince 2024

ASA G3: the in-house streaming architecture

T+A designs its own streaming hardware and software rather than buying a module. The third-generation Audiophile Streaming Architecture of 2024 is a quad-core board with Wi-Fi 6 and Gigabit Ethernet, native DSD streaming to DSD 256, Tidal, Spotify and Qobuz Connect, AirPlay 2 and Roon Ready, run from T+A's own MusicNavigator G3 app. Read the deep diveClose

What it does

Streaming boards are the part of a player most likely to be obsolete first, and most manufacturers buy them from one of a few suppliers. T+A keeps the whole chain in-house: design, PCB layout, certification, assembly, measurement, operating-system programming and app development. ASA G3 arrived on September 20, 2024 in the MP 2000 R G3 and MP 2500 R G3, in the MP 3100 HV G3 on October 18, 2024, and in the MP 200 G3 on November 28, 2024; Conradin Amft, then chief operating officer, described it as a core technology that the company would gradually implement in new products. The module streams DSD natively from the network for the first time in T+A's history; handles Tidal, Qobuz, Deezer, Amazon Music and HighResAudio, Tidal Connect, Spotify Connect and Qobuz Connect, AirPlay 2 and Roon Ready; and shares its control with the FM and DAB+ tuners the players also carry. The MusicNavigator G3 app is the controller; on the Caruso a seven-inch touchscreen runs T+A's own NavigatorOS instead. Owners of the earlier MP 3100 HV, MP 2000 R MK II, MP 2500 R and MP 200 can have their units upgraded to ASA G3 at the factory. The PSD 3100 HV, SDX 3100 HV, R 2500 R and Symphonia use the same module.

Why it matters in a system

A streamer that the manufacturer wrote itself is one the manufacturer can keep current, and the factory upgrade path shows what that means in practice: an MP 3100 HV bought in 2017 can be brought to the 2024 platform instead of being replaced. It also means the player, the app and the tuner behave as one product rather than as a module inside a box.

What you may hear

Stereophile on the R 2500 R: the app is the ideal interface, and the component just plays music and does it well. Killain Jones at SoundStage! found the R 2500 R effortlessly dynamic and able to produce deep, visceral bass.

Theory and application under one roofSince 1978

Designed, built and measured in Herford

Every T+A component is designed, assembled and measured at the company's own buildings in Herford, where it has been since 1988: circuit design, board layout, software, the MusicNavigator app, final assembly and a measurement protocol for every unit. Surface-mount board assembly is placed with a specialist using T+A-supplied parts; about 95 percent of production is in-house. Read the deep diveClose

What it does

T+A has occupied its own buildings in Herford since 1988 and added an administration, sales and laboratory building in 2003. A factory visit in April 2025 counted about 90 employees, 14 of them in research and development; T+A itself describes a team of fifteen designers and developers plus seven service technicians. The scope kept in-house runs from design, PCB layout and certification to assembly, measurement, operating-system programming and app development; the one step placed outside is surface-mount component placement, done by a specialist assembler using components T+A supplies, after which the boards return for final assembly and test. There are no assembly lines or automated placement machines, and nothing leaves the works without a measurement protocol. The company's own description is that it builds acoustic treasures rather than mass products, and it reports returning more than 98 percent of devices of any age to working condition when they come back for service. The engineering continuity is long: Lothar Wiemann, who joined as a student and developed the first electronics in 1982, was chief developer for 39 years before handing over to Jörg Küpper. In the United States, T+A North America in St. Marys, Georgia has handled distribution since August 2021, with service through Pyramid Audio in Austin and Audio Design and Service in Burbank.

Why it matters in a system

A product made in one place by the people who designed it can be supported for as long as its owner wants to keep it, and T+A's factory upgrades, the ASA G3 streaming boards fitted to players from 2017, are the practical form of that. It is also why a T+A system sounds consistent from the Series 200 to the HV line: the same small team designed all of it.

What you may hear

Jim Austin, in Stereophile on the MP 3100 HV: more than any other component he had had in his system, it radiated attention to detail. Michael Manousselis, who imported the brand to North America: they don't leave things to luck or to chance.

The Pearl Audio experience

How we work with you

A system at this level should be heard, thoughtfully matched, and properly set up. From the first audition to long-term ownership, you work with the same people, in person.

  1. 01

    Listen first

    The T+A MP 200 G3 CD / Streaming Transport is not in our rooms at present. When it is the right piece for a client we arrange a demonstration unit from the manufacturer and set it up for a private session.

  2. 02

    Delivery and installation

    We deliver and install throughout the Portland area, taking care of placement, connections, ventilation and system configuration ourselves.

  3. 03

    Support for as long as you own it

    We support everything we sell for as long as you own it, whether the answer comes by phone, in your home, or through factory service.

  4. 04

    A path for what comes next

    Trade-in assistance and qualifying 100% Trade-Up options give you flexibility when your listening priorities or your system change.

Search