← Back to your LP12 build

Hana · E Series

Hana EH

$475

Trade-in availableSignature technologiesThe Hana story

Not currently in our rooms. For a serious buyer we will often bring a piece in from the manufacturer for a private session — tell us about your system and what you are weighing it against, and we will advise.

Hana · E Series

Hana's entry-level high-output moving coil: a 2 mV design that plugs straight into a moving magnet phono input and is the natural first step up from the cartridge that came with your turntable.

Original E Series; Hana now also offers the E Series MK II ($550).

2 mV
output, MM-input compatible
Elliptical
synthetic stylus, aluminum cantilever
2.0 g
tracking force
5 g
weight

Authorized Hana dealer · Delivery and installation by Pearl Audio · Trade-ins welcome

The story

The EH is hand-built by Excel Sound in Japan and shares its moss-green body and 5 g weight with the low-output EL. Inside is Hana's cross-coil generator, which Hana credits for the cartridge's bass and dynamics, driving a synthetic elliptical stylus on a rigid aluminum cantilever. Output is 2 mV at 1 kHz with an internal impedance of 130 Ω, so it is designed to run into a standard 47 kΩ moving magnet input without a step-up transformer or a dedicated MC stage. Hana rates the EH for 2 g tracking force and 70 µm trackability at that weight, and backs it with a two-year warranty.

Reviewers describe the EH as smooth and easy-going, and L.L. Vinyl called it an audiophile bargain and a great introduction to MC reproduction. Because it works on an MM input, it is the Hana to choose for an integrated amplifier or receiver with a built-in phono stage, or for an entry-level outboard MM phono preamp. The 5 g body and aluminum cantilever make it a comfortable match for the light and medium-mass tonearms found on most modern turntables. Hana does not publish a compliance figure for the E Series; in practice the EH behaves like a medium-compliance cartridge. If your phono stage has a proper MC input with 60 dB or more of gain, the lower-output EL is the better buy at the same price.

The EH is the entry to the Hana range, with the EL as its low-output twin and the S Series MK II as the next step. On a trade-in, Musical Surroundings takes 30% off a new EH or EL for a worn one, 20% off for any other Hana, Clearaudio or DS Audio cartridge, and 10% off for any other brand.

Hana began in 2015, when Hiroshi Ishihara of Youtek reconnected with Masao Okada, whose Excel Sound Corporation had built moving-magnet cartridges for Pioneer, Trio, Sansui and Sanyo since the 1970s. The EL and EH were two of the first four models, and they introduced the Alnico generator and the low- and high-output pairing that still run through the range. Read the Hana story →

Key technologies

  • Alnico magnet. An Alnico magnet in Hana's cross-coil generator, which Hana credits for the E series' bass and dynamics.
  • Synthetic elliptical stylus. A bonded elliptical diamond on a rigid aluminum cantilever, tracking at 2 g with 70 µm trackability.
  • Hand built in Japan. Built by Excel Sound, which makes the major parts in-house and assembles each cartridge by hand.
  • 5 g, 15 mm tall. Light and low, so it suits almost any tonearm and headshell; two-year warranty.

The EL is the same cartridge wound for a moving-coil input; the SH MK II is the next high-output step.

Specifications
Type High-output moving coil (MC), for MM phono inputs
Output 2 mV at 1 kHz
Internal impedance 130 Ω at 1 kHz
Recommended load 47 kΩ
Tracking force 2.0 g (70 µm trackability at 2 g)
Compliance Not published by Hana
Weight 5 g (15 mm tall)
Stylus Synthetic elliptical
Cantilever Aluminum
Magnet Alnico (shared with the Hana EL)
Frequency response 15 Hz – 25 kHz
Channel separation / balance 25 dB at 1 kHz / within 2 dB
Body Moss green
Also available Hana EL (0.5 mV low-output version for MC phono stages)

Hana cartridge range (hanacartridges.com)

Rebuilds and trade-in

Hana trade-in and re-tip exchange (Musical Surroundings). Trade in a worn EH or EL and a new one is 30% off ($332). Trade in any other Hana, Clearaudio or DS Audio cartridge and it is 20% off ($380); any other brand's cartridge earns 10% off ($427).

Hana re-tip exchange — EH or EL for a new EH $332.50 (Hana does not retip; your worn cartridge is exchanged for a new one at 30% off)
Trade in your Hana EH $332.50 after trade-in (credit $142.50)
Trade in your Hana EL $332.50 after trade-in (credit $142.50)
Trade in your Hana EH MK II $380 after trade-in (credit $95)
Trade in your Hana EL MK II $380 after trade-in (credit $95)
Trade in your Hana SH $380 after trade-in (credit $95)
Trade in your Hana SL $380 after trade-in (credit $95)
Trade in your Hana SH MK II $380 after trade-in (credit $95)
Trade in your Hana SL MK II $380 after trade-in (credit $95)
Other Hana cartridges 6 more models qualify; use the trade-in selector on this page or ask us

The 30% re-tip exchange is Hana's replacement for retipping: a worn cartridge of the same series (working or not) is exchanged for a new one. Trade-ins of Musical Surroundings brands (Hana, Clearaudio, DS Audio) need an RA number and must arrive within 30 days of the invoice; other brands need an emailed photograph first. The Umami Blue and Red take other-brand trades only when the trade is worth more than $1,000 retail. Verified 2026-10-28. Source: Hana dealer price list, January 2026 (Musical Surroundings).

Where it sits in the range

The Hana cartridges Pearl Audio stocks, from least to most expensive:

  • Hana EH (this model)
  • Hana EL: entry low-output MC, 0.5 mV, elliptical
  • Hana SH MK II: Shibata high-output MC, 2 mV for MM inputs
  • Hana SL MK II: best-selling Shibata low-output MC, 0.4 mV
  • Hana SL Mono MK II: true mono Shibata MC, 0.4 mV
  • Hana MH: Microline high-output MC, 2 mV for MM inputs
  • Hana ML: Microline low-output MC, 0.4 mV, Umami Blue generator
  • Hana Umami Blue: Alnico Umami, boron cantilever, 0.4 mV
  • Hana Umami Red: samarium-cobalt Umami, ebony and duralumin, 0.4 mV
  • Hana Umami Black: flagship, diamond cantilever, neodymium OKD generator, 0.3 mV

Plan your Hana system with Pearl Audio

Pearl Audio is an authorized Hana dealer. Arrange an audition in our Portland showroom, and ask us about trade-in pricing against your current cartridge. Call (503) 222-2599 or email sales@pearlaudio.com.

Signature technologies

The engineering behind the Hana EH

Hana gives its technologies names because each one solves a specific problem. Here is what each does, where it came from, why it matters in a system, and what you may hear.

Elliptical, Shibata, Microline; aluminum, boron, diamondSince 2015

The stylus and cantilever ladder

Each step up the Hana range changes the two parts that touch the record: the diamond and the rod that carries it. The E Series uses an elliptical stylus on an aluminum cantilever, the S a nude Shibata on tapered aluminum, the M a nude Microline on aluminum, the Umami Blue and Red a Microline on solid boron, and the Umami Black a Microline on a diamond cantilever. Read the deep diveClose

What it does

The stylus profile decides how much of the groove wall the diamond reads. The E Series carries a synthetic elliptical, the simplest shape and the one most tolerant of setup. The S Series moves to a nude natural-diamond Shibata, a line-contact profile with a taller, narrower footprint; Hi-Fi News credits Excel Sound with mounting a Shibata on a crimped, stiffened alloy cantilever to lower tip mass. The M Series and the three Umami models use a nude Microline, the narrowest line contact, which Hana describes as mimicking the cutting stylus and fitting more precisely into the groove. The cantilever ladder runs alongside. The E and M use aluminum pipe; the S Series MK II of 2024 and the E Series MK II of 2026 use a tapered aluminum rod that Hana says is stiffer and has less effective mass at the tip, and Masao Okada called it the biggest change in the SL MK II. The Umami Blue and Red carry the Microline on solid boron, which Hana's brochure describes as about as hard as diamond and able to carry fine detail and micro-dynamics to the generator without loss. The Umami Black of 2025 is the first Hana with a diamond cantilever. The cantilever and stylus assemblies come from Orbray, formerly Adamant Namiki.

Why it matters in a system

A stiffer, lighter cantilever bends less between the stylus and the coils, so more of what the diamond traces reaches the generator and less is lost as flex or stored as resonance. A narrower line contact reads more of the high-frequency detail cut into the groove and wears records less, provided it is aligned with care. Line-contact profiles reward a well-set tonearm and clean records, which is part of what Pearl does at installation.

What you may hear

Andre Jennings of The Absolute Sound found the Shibata SL and SH to be models of sonic purity with very low perceived distortion. Herb Reichert of Stereophile wrote that the SL excavated more microscale information than the EL, especially in the high frequencies, and The Absolute Sound heard the tapered-cantilever SL MK II move a few steps closer to neutral.

And the OKD generator of the Umami BlackSince 2015

Alnico, samarium-cobalt and neodymium magnets

Most Hanas are built around Alnico, the aluminum-nickel-cobalt magnet of classic cartridges, chosen for its tonal character rather than its strength. The Umami Red moves to samarium-cobalt, and the Umami Black to a neodymium magnet inside a new generator, named OKD for Masao Okada, whose yoke both shapes the field and supports the diamond cantilever. Read the deep diveClose

What it does

A moving-coil cartridge is a tiny generator: coils on an armature swing in the field of a fixed magnet, and the magnet's material sets both the strength and the shape of that field. Hana's E, S and M Series and the Umami Blue use Alnico, which Musical Surroundings describes as less powerful than modern magnets, and which Hana keeps for the way it sounds; The Absolute Sound called the result a meeting of old and new. The EL MK II of 2026 retains the classic Alnico magnet behind its updated coil. The Umami Red of 2020 is the first Hana to use a rare-earth magnet, samarium-cobalt, in a pure-iron magnetic circuit with a square-plate Permalloy armature. The Umami Black of 2025 goes further: a neodymium N40 magnet, a 2 mm square hybrid carbon-permalloy armature hand-wound with 30-micron 4N copper, and the OKD generator, in which the rear pole piece and yoke are made as a single part and an inverted-U front yoke supports the cantilever while aligning the field, so that the mechanical path from the stylus and the magnetic path through the coils are handled by the same structure. Hana says the Black is much more than an Umami Red with a diamond cantilever, and its output is 0.3 mV at 5 ohms.

Why it matters in a system

The magnet decides how much signal the coils make for a given motion and how linear that field is across the coil's travel. Alnico gives Hana a sound many listeners associate with the great cartridges of the 1960s and 1970s at a modest price; rare-earth magnets give the Umami Red and Black more field from the same space, and the OKD yoke brings resonance control and field alignment into one part.

What you may hear

Herb Reichert of Stereophile linked the Alnico SL to a black background, seductively rendered top octaves and exquisite inner detail. Andre Jennings of The Absolute Sound found the Umami Black neither warm nor rolled-off, leaning toward clarity, resolution and tone color rather than ultimate bass slam.

L for a moving-coil input, H for a moving-magnet input, and one monoSince 2015

Low- and high-output versions

Every Hana series below the Umami comes as an L model of about 0.4 mV for a moving-coil phono input and an H model of 2 mV at 130 ohms for a standard 47-kilohm moving-magnet input, with the same stylus, cantilever and body. The SL Mono is the one mono cartridge in the range. Read the deep diveClose

What it does

The letters in a Hana model name tell you how it is wound. EL, SL and ML are low-output moving coils: 0.4 mV from 8 ohms on the ML, SL MK II and EL MK II, into a recommended load of 80 or 100 ohms and up, which means a moving-coil phono stage or a step-up transformer. EH, SH and MH carry more turns of wire for 2 mV at 130 ohms into 47 kilohms, so they plug into the moving-magnet input that almost every integrated amplifier and phono stage already has; Hana calls the MH the optimal interface for moving-magnet phono stages. The diamond, cantilever, magnet and body are the same within each series, so the choice is about the electronics you own rather than the sound you want. The SL Mono MK II is a two-coil design with its armature rotated 45 degrees so it reads only the lateral modulation of a mono groove, but it keeps vertical compliance, so a stereo record can be played on it without harm; it delivers 0.4 mV at 23 ohms into 230 ohms or more. The Umami Blue, Red and Black are low-output only, at 0.4, 0.4 and 0.3 mV. Every current Hana tracks at 2 grams and is rated to 70 microns.

Why it matters in a system

A cartridge only sounds as good as the input it feeds. The H versions let a listener with a good moving-magnet stage have the Shibata or Microline diamond without buying more electronics, and the L versions give the lower moving mass and quieter floor of a short coil to anyone with a proper moving-coil input. Pearl's job is to read your phono stage first and recommend the letter second.

What you may hear

Alan Sircom of hi-fi+ wrote that the MH is awesome but that in the right setting the ML is awesome-r. StereoNET found the SL MK II and SH MK II both dynamic, detailed and musical, and Herb Reichert of Stereophile summed up the SL Mono in three words: power, detail, elegance.

Builders trained five to ten years, in YokohamaSince 1970

Hand assembly at Excel Sound

Every Hana is designed by Masao Okada and assembled by hand at Excel Sound in Yokohama, the company he founded in 1970 and that once supplied moving-magnet cartridges to Japan's largest brands at 50,000 units a month. A builder's training takes five to ten years; two of the craftsmen have been there thirty to forty years. Read the deep diveClose

What it does

Excel Sound Corporation was for decades the maker behind other names. Hi-Fi News describes it as once the go-to supplier of high-quality moving-magnet cartridges to Pioneer, Trio (Kenwood), Sansui and Sanyo, turning out more than 50,000 units a month at the peak of the first vinyl boom, and it still builds cartridges for Sumiko and the Etsuro Urushi line for Dai-ichi Shoji of Yokohama. That history is the method behind Hana. Okada, who began researching cartridge design in 1964 and is the company's owner and president, designs every Hana pickup himself. The coils are wound by hand on the armature; the Umami Black's 2 mm carbon-permalloy armature is hand-wound with 30-micron copper, and Hana states that all the major parts of the Umami Red are manufactured in house by Excel Sound, with the stylus and cantilever assemblies sourced from Orbray. Okada told StereoNET that the required training time for a builder is between five and ten years, that two of his craftsmen have worked at Excel Sound for thirty to forty years, and that about eight Umami Reds are completed in a day, before finishing and packaging. Hiroshi Ishihara of Youtek, who reconnected with Okada in 2015, developed the Hana line with him for export, and Musical Surroundings of Oakland, California, distributes it in the United States.

Why it matters in a system

A moving-coil cartridge is assembled under magnification by people, and the consistency of the people is the consistency of the product. A workshop that has wound coils for half a century, for its own name and for others, can hold tolerances at $550 that smaller ateliers hold only at several thousand, which is the reason reviewers keep writing about Hana in terms of value as much as sound.

What you may hear

Herb Reichert of Stereophile wrote that each Hana SL played records as if it cost not hundreds but thousands of dollars. Andre Jennings of The Absolute Sound found that with the Umami Blue, Hana had set another benchmark of performance for cost.

All Hana technologies and the company story

The Hana story

Moving-coil cartridges designed by Masao Okada and built by hand at Excel Sound in Yokohama, from the EL to the Umami.

Founded 1970 in Tokyo, Japan; Excel Sound now builds every Hana in Yokohama by Masao Okada · hanacartridges.com

Milestones

  1. 1970 Excel Sound Corporation Masao Okada, who began researching phono cartridge design in 1964, opens the Excel factory in Tokyo. The company's first products under its own name are the ES-70 line, initially six models; today it works from Yokohama.
  2. 1975 The OEM years From 1975 through the 1980s Excel builds moving-magnet cartridges for Pioneer, Trio (Kenwood), Sansui and Sanyo, more than 50,000 a month at the peak of the vinyl boom, and later moving coils for Sumiko and other brands that keep their supplier anonymous.
  3. 1982 Surviving the compact disc As LP demand falls, Excel keeps a small OEM cartridge business and diversifies into low-priced audio and video accessories, which carries the company through the years vinyl was declared dead.
  4. 2015 Hana Hiroshi Ishihara of Youtek reconnects with Okada and the Hana line, meaning brilliant and gorgeous, is developed for export: the elliptical EL and EH and the Shibata SL and SH, each in low- and high-output versions. Stereophile reviews the EL in August 2016; The Absolute Sound covers all four in March 2017.Hana EL
  5. 2018 SL Mono and the M Series The SL Mono adds a mono cartridge in the spring, and in October the ML and MH introduce the Microline stylus, the Delrin-and-brass body, cryogenic treatment and the 8-ohm pure-copper generator. hi-fi+ names the ML Phono Cartridge of the Year for 2019.Hana ML
  6. 2020 Umami Red Announced August 3 and on sale September 22 at $3,950: boron cantilever, samarium-cobalt magnet, a Duralumin Auricle body with ebony inlay and red Urushi lacquer. hi-fi+ Cartridge of the Year 2020 and Stereophile Class A.Hana Umami Red
  7. 2023 Umami Blue The Red's body and boron cantilever over the ML's Alnico generator, at $2,500, with a white POM inlay and blue enamel. The Absolute Sound gives it a Golden Ear Award.Hana Umami Blue
  8. 2024 S Series MK II The SL MK II, SH MK II and SL Mono MK II arrive in September at $850 with a tapered aluminum cantilever, the 8-ohm generator, cryogenic treatment and the M-Series body. The SH MK II goes on to win hi-fi+'s 2026 cartridge award.Hana SL MK II
  9. 2025 Umami Black Announced September 3 at $11,500: the first Hana with a diamond cantilever, a neodymium magnet and the OKD generator named for Okada, in black Urushi. In October an Umami Fest in Healdsburg, California gathers participants from six countries, with Okada present.Hana Umami Black
  10. 2026 E Series MK II On September 1 the EL MK II and EH MK II, at $550, replace the original entry models with the M-Series body, cryogenic treatment and, on the EL, the 8-ohm generator. Okada still designs every Hana and his builders still train for five to ten years.
Read the Hana story
Hana Umami Red

Masao Okada began researching phono cartridge design in 1964 and opened the Excel factory in Tokyo in 1970; the company he founded, Excel Sound Corporation, works today from Yokohama. Its first products under its own name were the ES-70 line, initially six models. The business that followed was mostly anonymous. From 1975 through the 1980s Excel built moving-magnet cartridges for Pioneer, Trio (Kenwood), Sansui and Sanyo, and at the peak of the first vinyl boom it was shipping more than 50,000 units a month, which Hi-Fi News later summarized as once the go-to supplier of high-quality moving magnets. Moving-coil designs followed, and the company became the builder of cartridges for Sumiko, with different magnets, yokes and coil formers from anything it would later sell as its own.

Demand for records fell after the compact disc arrived in 1982. Excel kept a small cartridge business for brands that preferred not to name their supplier and diversified into low-priced audio and video accessories, which is how it survived the years when vinyl was declared dead. In 2015 Hiroshi Ishihara of Youtek Corporation reconnected with Okada, and the two developed a line for export under the name Hana, the Japanese word 華, which the company translates as brilliant and gorgeous. The first four models were the EL and EH, with elliptical styli, and the SL and SH, with Shibata diamonds, each in a low-output version for moving-coil inputs and a high-output version for moving-magnet inputs. Herb Reichert reviewed the EL in Stereophile in August 2016, and The Absolute Sound covered all four in March 2017 at $475 and $750. Musical Surroundings of Oakland, California, became the US distributor.

The SL Mono of 2018 added a mono cartridge at $750. In October 2018 the M Series introduced the ideas that define the current range: a nude Microline stylus, a Delrin body with a brass cap, cryogenic treatment of the magnetic circuit, and an 8-ohm generator wound with thicker copper. hi-fi+ named the ML its Phono Cartridge of the Year for 2019. The Umami Red followed, announced on August 3, 2020 and on sale from September 22 at $3,950, with a boron cantilever, a samarium-cobalt magnet, a Duralumin body, an ebony inlay and red Urushi; its name, the fifth taste, was suggested by Garth Leerer of Musical Surroundings. It was hi-fi+'s Cartridge of the Year for 2020 and Stereophile Class A. The Umami Blue of March 2023, at $2,500, put the Red's body and cantilever over the ML's Alnico generator and won a Golden Ear from The Absolute Sound.

In September 2024 the S Series became the SL MK II, SH MK II and SL Mono MK II at $850, with a tapered aluminum cantilever, the 8-ohm generator, cryogenic treatment and the M-Series body; the original SL was cut to $600 and built for about six more months. The Umami Black, announced September 3, 2025 at $11,500, brought a diamond cantilever, a neodymium magnet and the OKD generator named for Okada, and that October an Umami Fest in Healdsburg, California gathered the brand's partners from six countries, with Okada present. The SH MK II won hi-fi+'s 2026 cartridge award, and on September 1, 2026 the E Series MK II, at $550, replaced the original entry models. Okada remains owner and president and designs every Hana; two of his craftsmen have been at Excel Sound for thirty to forty years. Pearl Audio carries the range in Portland.

The complete Hana story and technology library

Hana at Pearl Audio

Pearl Audio is an authorized Hana dealer in Portland, carrying the range from the entry E Series through the S Series MK II, SL Mono MK II and M Series to the Umami Blue, Red and Black. Because every series below the Umami comes in a low-output and a high-output winding, we start with the phono stage and tonearm you own and recommend the model that suits them, whether that is an MH into a moving-magnet input or an SL MK II at 80 ohms into a moving-coil stage. We install and align the cartridge in your arm, set tracking force and loading, and can advise on the step up from one series to the next when the time comes.

Ownership

Rebuilds, exchange and trade-in

Trade in a worn EH or EL and a new one is 30% off ($332). Trade in any other Hana, Clearaudio or DS Audio cartridge and it is 20% off ($380); any other brand's cartridge earns 10% off ($427).

Hana trade-in and re-tip exchange (Musical Surroundings)

Trade-in credit
—
Your price after trade-in
$475

Credit is 20% of the new cartridge’s price for a worn EH or EL at 30%; any Hana, Clearaudio or DS Audio cartridge at 20%; any other brand at 10%. The 30% re-tip exchange is Hana's replacement for retipping: a worn cartridge of the same series (working or not) is exchanged for a new one. Trade-ins of Musical Surroundings brands (Hana, Clearaudio, DS Audio) need an RA number and must arrive within 30 days of the invoice; other brands need an emailed photograph first. The Umami Blue and Red take other-brand trades only when the trade is worth more than $1,000 retail. Verified 2026-10-28.

Ask us about this trade-in

Factory rebuild and retip

ServicePrice
Hana re-tip exchange — EH or EL for a new EHHana does not retip; your worn cartridge is exchanged for a new one at 30% off $333

Pricing per Hana - 2026-01 - Dealer Price List (Musical Surroundings, January 2026) and musicalsurroundings.com/faq. Programs are set by the manufacturer and may change.

The Pearl Audio experience

How we work with you

A system at this level should be heard, thoughtfully matched, and properly set up. From the first audition to long-term ownership, you work with the same people, in person.

  1. 01

    Listen first

    The Hana EH is not in our rooms at present. When it is the right piece for a client we arrange a demonstration unit from the manufacturer and set it up for a private session.

  2. 02

    Delivery and installation

    We deliver and install throughout the Portland area, taking care of placement, connections, ventilation and system configuration ourselves.

  3. 03

    Support for as long as you own it

    We support everything we sell for as long as you own it, whether the answer comes by phone, in your home, or through factory service.

  4. 04

    A path for what comes next

    Trade-in assistance and qualifying 100% Trade-Up options give you flexibility when your listening priorities or your system change.

Search