← Back to your LP12 build

Cardas · Clear Cygnus

Cardas Audio Clear Cygnus Phono

From $530

Signature technologiesThe Cardas Audio story

Not currently in our rooms. For a serious buyer we will often bring a piece in from the manufacturer for a private session — tell us about your system and what you are weighing it against, and we will advise.

Cardas · Clear Cygnus

Flagship-derived Matched Propagation conductors in a shielded star quad, at the price most analog systems can justify: organic, dynamic and neutral, with rich analog detail.

Price is for one complete phono cable, both channels, at the shortest length shown. Choose length and ends in the selector. The CG XLR phono-stage end is a $200 upgrade.

4 × 25.5 AWG
Cardas Litz conductors, Golden Ratio stranding
Star-quad
four-conductor geometry
9.8 mm
outside diameter
0.5–2.75 m
standard lengths, any length to order
Options and pricing

Authorized Cardas dealer · Delivery and installation by Pearl Audio · Trade-ins welcome

The story

Clear Cygnus Phono borrows the star-quad geometry and air-tube suspension of the flagship Clear Beyond Phono, with four 25.5 AWG Matched Propagation conductors insulated in a double layer of PTFE tape; the composite shield rides on its own layer of larger air tubes.

Cardas calls it very organic and dynamic, keeping the Cardas sound with a neutral tonal balance and rich analog detail, and says it works in almost any analog system. Standard terminations are a Cardas S-DIN to GRMO RCA or RCA to RCA; a CG XLR phono-stage end is a $200 upgrade.

Check your tonearm: most have a 5-pin DIN socket under the arm base (straight DIN), some exit sideways and need a 90° DIN, and others have RCA sockets on the plinth. Cardas builds a 90° R-DIN or SME-style 90° DIN to order at no extra charge in most cases; tell us the arm model and we will specify it. 1 m to 1.25 m suits a phono stage on the same shelf; measure the real path to a stage on another rack and round up to the next quarter meter.

George Cardas ran a record label from 1990 to 1992, producing audiophile LPs with his own microphones and cables, and phono cables have been part of the range ever since. The Matched Propagation Conductor he patented in 2010 became the Clear line; Robert H. Levi called the Clear Beyond phono cables the quietest he had ever used in Positive Feedback in 2019, and every Cardas phono cable is terminated by hand in Bandon, Oregon. Read the Cardas story →

Key technologies

  • Matched Propagation Technology. US Patent 7,674,973: the propagation rate of the conductor is matched to that of the dielectric through the conductor's internal geometry, so the signal is not smeared in time.
  • Ultra Pure Cardas Copper. Grade 1, 99.9999% pure oxygen-free copper, drawn and annealed slowly through silver dies, then given a single poly-nylon coat to prevent oxidation and crosstalk between strands.
  • Golden Ratio scaled Litz conductors. Multi-stranded conductors in which each layer of strands steps up in size by 1:1.618 from the center outward, a Cardas patent that controls strand resonance.
  • Air-tube suspension. Anti-static LDPE air tubes and carbon-impregnated PTFE tape hold the conductors in air; a second layer of tubes 1.618 times larger suspends the composite shield away from the signal path.
  • Made in Bandon, Oregon. Every Cardas cable is built and hand terminated at the Cardas factory on the southern Oregon coast and carries the Cardas lifetime cable warranty.

The Clear Phono is the step up; the Clear Cygnus Interconnect is its partner.

Specifications
Type Phono (tonearm) cable, both channels
Conductors 4 × 25.5 AWG; Matched Propagation Kevlar-core Litz, double-layer PTFE tape insulation
Geometry Star-quad, four conductors with anti-static LDPE air tubes bound in carbon-impregnated PTFE tape; outer PTFE air tubes scaled 1.618× suspend the composite shield of tinned copper and magnet wire
Outside diameter 0.384 in (9.8 mm)
Tonearm end Straight 5-pin DIN (Cardas S-DIN) or RCA pair (turntable with RCA outputs); Cardas R-DIN (90°) and SME 90° DIN to order
Phono stage end RCA pair — Cardas GRMO or XLR pair — Cardas CG XLR upgrade
Lengths 0.5 m to 2.75 m standard (see selector); any length to order
Sold as Single cable
Warranty Cardas lifetime cable warranty
Made in Bandon, Oregon, USA

Cardas Clear Cygnus Phono product page and specifications Specifications from cardas.com and the Cardas 2025 Dealer Catalog (Spring 2025 Retail). Lengths are metric; Cardas builds any length to order.

Where it sits in the range

Cardas phono cables run from Iridium to Clear Beyond Phono X2, built with a straight 5-pin DIN or RCAs at the tonearm and Cardas RCAs at the phono stage; R-DIN (90°) and SME 90° DIN to order.

Plan your Cardas system with Pearl Audio

Pearl Audio is an authorized Cardas dealer. Tell us your tonearm and phono stage and we will specify the DIN or RCA ends, order custom lengths, and arrange an audition in our Portland showroom. Call (503) 222-2599 or email sales@pearlaudio.com.

Signature technologies

The engineering behind the Cardas Audio Clear Cygnus Phono

Cardas Audio gives its technologies names because each one solves a specific problem. Here is what each does, where it came from, why it matters in a system, and what you may hear.

Strands sized at 1:1.618, patented 1986 and 1990Since 1983

Golden Section stranding

Every Cardas conductor is a bundle of individually insulated strands in concentric layers, each layer's strands larger than the layer inside by the Golden Ratio, 1:1.618. Because no two strand sizes share a resonant frequency, the mechanical vibration set up by current cannot build up coherently, and the larger outer strands damp the smaller inner ones. George Cardas built the first machinery for it in 1983 and patented it in 1986 and 1990. Read the deep diveClose

What it does

Alternating current makes the strands of a cable vibrate, and Cardas's own explanation compares each strand to a guitar string with its own resonance. If every strand is the same size, they all resonate at the same frequency and reinforce one another. George Cardas, who had applied Golden Ratio proportions to racing engines and exhausts before he applied them to wire, arranged the strands so that each concentric layer steps up in size by 1.618, the limit of the Fibonacci sequence. No two sizes share a resonance, so the vibration has nowhere to add up, and the heavier outer strands hold the finer inner ones still. The first patent, US 4,628,151 for a multi-strand conductor with strands sized according to the golden section, was filed on December 30, 1985 and granted on December 9, 1986; the second, US 4,980,517 of December 1990, covers the arrangement of larger strands outside and smaller strands inside in an irrational progression. Cardas describes the result as a micro resonance control technique that gives all its cables a constant Q, and it is present in every cable and chassis wire the company makes, from Crosslink and 101 to Clear Beyond, the Ground Cable and the solid-core wiring inside the Nautilus power strip.

Why it matters in a system

A cable cannot add anything useful to a signal; the best it can do is avoid storing energy and releasing it late. Strand resonance is one of the ways a cable stores energy, and it is proportional to current, so it matters most in speaker and power cables. Golden Section stranding is Cardas's mechanical answer, and it is the reason the company's cables have had a recognizably consistent character across four decades of designs.

What you may hear

George Cardas described the problem he set out to solve in 1996 as conductor glare, which he heard as harmonic resonance. Brian Von Bork of Cardas has said a guitar string wound in the Cardas pattern would be completely dead and would not ring; what listeners describe is a lack of brightness or edge without any loss of detail.

Slow-drawn and hydrogen-annealed to George Cardas's process at a US millSince 1988

Cardas copper

Cardas does not smelt or draw its own copper. A year or two after the company was founded, George Cardas found the last US producer able to make ultra-pure fine copper wire to his specification, promised it a steady stream of orders, and had rod drawn slowly through diamond dies and annealed in a hydrogen atmosphere. That Grade 1 copper goes into every Cardas cable from Iridium up. Read the deep diveClose

What it does

In the late 1980s recycling laws and high-speed drawing had filled the market with copper that was fine for house wiring and poor for audio. George Cardas's answer was to control the drawing rather than the mining. Cardas copper is mined in the American Southwest and processed in the Northeast at a mill that was close to closing when Cardas partnered with it; the company has kept it in business with orders ever since, using a method George Cardas developed more than 35 years ago. The rod is drawn slowly through diamond dies and annealed in an oxygen-scavenging hydrogen atmosphere, which avoids both the crystal damage caused by fast drawing and the copper-oxide impurities that come with it. Two non-audio customers, a low-thermal DC measurement cable and detector chips for a cyclotron whose commercial copper lost thermal conductivity near 40 kelvin, showed that noise correlated with drawing damage and oxide, and that slow oxygen-free drawing cured it. Cardas describes the result as smooth from the surface to the core and says it exceeds OFHC and OCC copper in conductivity. Grade 1 copper is used from Iridium to Clear Beyond; a more affordable Grade 2 goes into Crosslink and 101. Cardas also sells its strand by the pound and chassis wire by the foot to other manufacturers.

Why it matters in a system

Every Cardas technology sits on top of the metal. The Golden Section strands, the Litz enamel and the Matched Propagation twist all assume a conductor with a consistent crystal structure and no oxide inclusions, and Cardas has said its goal was the most grain-free copper ever produced for audio. It is also why so much other high-end equipment carries Cardas wire inside: Angela Cardas Meredith has said that even if it does not have the Cardas name on it there is a good chance they made it.

What you may hear

A lack of grain or texture on sustained tones, and the quiet background that reviewers of the Clear series return to. Herb Reichert, writing in Stereophile about Clear Beyond, heard a sublime quiet and a grand spaciousness.

US Patent 7,674,973: the strand twist tuned to the dielectricSince 2010

Matched Propagation conductors

A signal travels faster along a bare conductor than through the insulation around it, and the mismatch stores energy and releases it late, as time smear. Cardas's Matched Propagation Conductor sets the twist pitch, and so the helical length, of each strand layer around a Kevlar core so that signal speed in the copper matches the dielectric. It was filed in 2008 and introduced in the Clear line in 2010. Read the deep diveClose

What it does

Cardas puts the speed of a signal in a typical dielectric at about 78 percent of the speed of light, while in a bare conductor it is faster. Telephone engineers knew the problem a century ago and compensated for it with lumped loading coils, the Pupin coils of 1904. George Cardas's approach, which he says he found largely by ear, cures it continuously along the cable instead: each layer of strands is wound around a central Kevlar element at a twist angle calculated so that the strand's path is long enough for its effective signal speed to match the surrounding dielectric. The patent, US 7,674,973, was filed on April 18, 2008, and by the spring of 2010 George Cardas was describing it as his new patent; its abstract says each strand's length is set from the dielectric's velocity of propagation so that signal speed along the conductor more closely matches speed in the surrounding dielectric. It is a separate idea from Golden Section stranding, which sets strand sizes; Matched Propagation sets strand lengths. It debuted in the Clear cables of 2010 and now runs through Clear Beyond, Clear, Clear Reflection, Clear Cygnus, Clear Sky and Clear SE9 MP, and Cardas lists the Parsec interconnect under it as well.

Why it matters in a system

Time smear is what listeners hear as glare, and it had been compensated for rather than cured in audio cables for as long as there had been audio cables. Matched Propagation was the change that let Cardas move from the slightly warm balance of Golden Cross and Golden Reference, which were designed to tame early digital recordings, to the neutrality of the Clear series. George Cardas warned in 2010 that the Clear conductors have no forgiveness and assume a reference-quality system.

What you may hear

Speed and transparency without edge. John Marks, in Stereophile, called the first Clear speaker cables the best-sounding cables he had heard; Alan Sircom of hi-fi+ found Clear Beyond warm and easy to listen to without being warm-toned, and called that quite the achievement.

Five tiers of Matched Propagation cableSince 2010

The Clear line, from Clear Beyond to Clear Sky

Clear is Cardas's premium range, built around Matched Propagation conductors, Grade 1 copper and air-tube construction. From the top down it runs Clear Beyond, Clear, Clear Reflection, Clear Cygnus and Clear Sky, and each step down uses fewer or lighter conductors, simpler dielectric suspension and, below Clear, less costly connectors. Read the deep diveClose

What it does

Clear launched in 2010 with the speaker cable and interconnect, and at CES in January 2011 Cardas showed a three-tier line of Clear Light, Clear and Clear Beyond. Today there are five tiers. Clear Beyond is the flagship: the interconnect, introduced for the 30th anniversary in 2017 at $3,750 a meter, is a star quad of four 26.5 AWG conductors with about 25 percent more copper than Clear; the speaker cable carries eight 10.5 AWG conductors, twice as many as Clear, and can be ordered internally bi-wired, which Clear cannot. Clear sits one step down, a triad of three 25.5 AWG conductors in the interconnect, with the same SRCA and CG XLR connectors as Clear Beyond and Clear Jumpers for bi-wiring. Clear Reflection of 2015 replaced Golden Cross and Golden Reference: a two-conductor twisted pair on air tubes sized 1.618 times the core tubes, with the Tri-Quad speaker geometry borrowed from Golden Reference, voiced warmer than Clear, on copper SRCA-CU connectors. Clear Cygnus of 2017 replaced Clear Light with a four-conductor star quad and GRMO connectors, and its speaker cable can be bi-wired. Clear Sky is the least expensive Matched Propagation interconnect, a shielded 23.5 AWG twisted pair. The power cords are shielded twisted triads with air tubes; the Clear Beyond XL of 2018 adds a toroidal ground filter.

Why it matters in a system

The tiers share the same copper and the same patented conductor, so moving up the line changes the amount of copper, the complexity of the air-tube suspension and the connectors rather than the character. That makes it practical to put Clear Beyond where it matters most and Clear Cygnus or Clear Sky elsewhere, and Cardas's trade-in program lets Parsec, Clear Sky X4, Cygnus, Reflection and Clear cables be traded toward the tier above through a dealer.

What you may hear

Herb Reichert of Stereophile heard from Clear Beyond a sublime quiet, a grand spaciousness and seemingly infinite detail, and the apparent volume of the recording venue expanded dramatically. Alan Sircom of hi-fi+ called Clear Cygnus arguably Cardas's most affordable do-no-harm loudspeaker cable.

How a Cardas cable is put togetherSince 1996

Air tubes, Litz enamel and Crossfield layers

Each Cardas strand carries its own poly-nylon enamel so strands never touch; each layer is wound in the opposite direction to the one beneath it, with the twist calculated so every strand is the same length; and the finished conductors ride on hollow PTFE or polyethylene air tubes that hold the shield and jacket away from the signal, because air is the best dielectric there is. Read the deep diveClose

What it does

A Cardas conductor is a Litz construction: every strand is coated with a single poly-nylon enamel, which prevents oxidation and stops current hopping between strands, so there is no crosstalk inside the bundle and skin effect cannot shift the signal from strand to strand. The layers are counter-wound, which Cardas calls Crossfield, and the turns per inch of each layer are calculated so that every strand ends up the same length. Around the conductors Cardas builds what it calls air-tube dielectric suspension: hollow tubes of PTFE, LDPE or polyethylene carry the conductors and keep the shield and jacket at a distance, and on Clear Reflection and Clear Cygnus the outer PTFE tubes are sized 1.618 times the core tubes. Clear Beyond's interconnect sits its star quad on LDPE air tubes wrapped in carbon-impregnated PTFE tape, which dissipates static, inside outer PTFE tubes that hold the shield away from the signal; Cardas calls the result a virtual air-suspension environment. The power cords use the same idea with PVC or polyethylene tubes inside a twisted triad. George Cardas was already describing a Teflon and air dielectric around extremely soft and pure copper in 1996, and the braiding and air-tube assembly are done in Bandon. The solid-core Nautilus wiring and the Clear Network cable are the exceptions to the Litz rule.

Why it matters in a system

The dielectric around a conductor stores charge and gives it back late, and the closer and denser the insulation, the more it does so. Suspending the conductors in air, and keeping the shield away from them, lowers that stored energy without the losses of a heavier insulation, and the Litz enamel keeps each strand doing its own job. It is also why Cardas cables are stiff for their size and why the company advises against moving them once they have settled.

What you may hear

Upscale Audio described the layered air tubes that float the conductors as hard to manufacture. What they buy is the quiet background and the lack of glare that the Clear range is known for; Gregory Petan of Positive Feedback heard in Clear Beyond not a hint of tubiness, bloat or low-end overhang.

Billet copper, silver, a flash of rhodium, and no solder on the big cablesSince 1996

Cardas connectors, die-forging and plating

Cardas makes its own connectors because, in the company's early days, George Cardas found none good enough for his cables. They are machined from copper or brass, heavily silver-plated and flashed with rhodium so the silver cannot tarnish. On the four upper speaker cables the conductor and the billet-copper spade or banana are fused in a die at 10,000 psi with no solder at all; everywhere else Cardas uses its own Quad Eutectic solder. Read the deep diveClose

What it does

Cardas rejects the nickel-under-gold plating most connectors use, because the nickel layer makes the connector inferior, and bare copper, which oxidizes quickly. Its own method is heavy silver over machined copper or brass with a rhodium flash on top, a plating sequence it calls tried and true. The families cover the whole system: GRMO and GRCM RCAs, the SRCA used on Clear and Clear Beyond and the all-copper SRCA-CU on Clear Reflection, CG and CE XLRs, CGMS and GRS spades, CABE and CABD bananas, S-DIN and R-DIN phono plugs, the E-5 and 3455R power plugs with solid-copper contacts, and the 4181US outlets in the Nautilus strip. Some are machined at a Bandon machine shop. For the Clear Cygnus, Clear Reflection, Clear and Clear Beyond speaker cables, Cardas uses compression die forging, introduced with Clear in 2010: the copper of the conductor and the billet-copper spade or banana are pressed together at 10,000 psi until they fuse as one, with no solder joint between them. Where solder is used, it is Quad Eutectic, a proprietary blend of silver, copper, tin and lead developed when Cardas found silver solders were not up to terminating its cables, applied with Cardas rosin flux by staff in Bandon. Jeff Rowland's components carry Cardas chassis-mount XLRs.

Why it matters in a system

A cable has at least two joints, and a joint that oxidizes, loosens or adds a dissimilar metal adds resistance and noise that no conductor can remove. Forging takes the solder out of the current path on the speaker cables that carry the most current, and silver under rhodium keeps a contact the same for decades, which is part of why Cardas can put a lifetime warranty on its cables.

What you may hear

Alan Sircom of hi-fi+ described the Clear Reflection terminations as cold-welded and pressure-crimped. Robert H. Levi of Positive Feedback found the Clear Beyond copper connectors snap on and off easily, though he noted the XLRs have no locking mechanism.

Braided, suspended, forged and terminated on the Oregon coastSince 1992

The Bandon factory

Cardas has been built in Bandon, Oregon since 1992, when George and Darcy Cardas moved the company and most of its staff from Southern California to a town of about 3,300 on the south coast. About 14 or 15 people braid the conductors, assemble the air tubes, forge and solder the terminations and hand-assemble the Nautilus strip there, and every cable carries a lifetime warranty. Read the deep diveClose

What it does

When the lease on the Upland, California facility came up in 1992, George and Darcy Cardas chose Bandon, in Coos County, about an hour and a half north of the California border; most of the staff moved with them, and Colleen Cardas, the middle daughter, became the Bandon manager. The Golden Section conductors are braided on machines Cardas modified from designs more than a hundred years old; the air-tube suspensions are built up around them; the upper speaker cables are compression-forged and everything else is terminated by hand with Quad Eutectic solder; wire guides and joiners are 3D-printed and some connectors machined locally; and the Nautilus power strip is hand-assembled with its kilogram copper earth plate. The copper itself is not drawn in Bandon but at a US mill in the Northeast to Cardas's process. hi-fi+ counted about 15 staff on a visit in 2019; Angela Cardas Meredith, who returned around 2014 and manages the company, puts the usual number at about 14. The Absolute Sound reported in 2015 that OEM wire, strand and connectors for other manufacturers had become the company's largest business; EAT, YG Acoustics, Joseph Audio, Avalon and Jeff Rowland are among the published names. John Darko's 2022 film American Made followed a Clear Beyond speaker cable through the building.

Why it matters in a system

A cable made by fourteen people in one building, by a company run by its founder's daughter with the founder as head designer, is built by people who will still be there when it needs re-terminating. Cardas's lifetime warranty on cables, and a trade-in program that credits Parsec through Clear toward the tier above, are consequences of that continuity, and a reason to buy a Cardas cable as a long-term component rather than an accessory.

What you may hear

Pete Collingwood-Trewin of hi-fi+, after visiting Bandon, wrote that he was enamored by the passion in all they do. Angela Cardas Meredith's own summary is that cables are a component too.

All Cardas Audio technologies

The Cardas Audio story

Golden Ratio stranding, Matched Propagation copper and hand termination on the Oregon coast since 1992.

Founded 1987 in Southern California; in Bandon, on the southern Oregon coast, since 1992 by George Cardas · cardas.com

Milestones

  1. 1986 The Golden Section patent George Cardas patents a multi-strand conductor with its strands sized by the Golden Ratio, so no two strand sizes share a resonance.
  2. 1987 Cardas Audio is founded The company begins in Southern California, with Hexlink and Golden Cross as its early flagship cables.
  3. 1992 The move to Bandon, Oregon Cardas relocates to Bandon, on the southern Oregon coast, and most of the staff move with it. Every Cardas cable has been built there since.
  4. 2005 Golden Reference Golden Reference succeeds Golden Cross at the top of the range, with 816 conductors in twelve bundles and rhodium-plated connectors.
  5. 2008 Matched Propagation A second patent is filed: the twist of each strand layer is set so that signal speed in the copper matches the surrounding dielectric.
  6. 2010 Clear The Clear line launches with speaker cables and interconnects built on Matched Propagation conductors and forged terminations.Cardas Audio Clear Interconnect
  7. 2015 Clear Reflection and Parsec Clear Reflection replaces Golden Cross and Golden Reference, and Parsec takes over from Quadlink.Cardas Audio Clear Reflection Interconnect
  8. 2017 30th anniversary The Clear Beyond interconnect arrives, with Iridium and Clear Cygnus joining the range.Cardas Audio Clear Beyond Interconnect
  9. 2022 American Made A film follows a Clear Beyond speaker cable being braided, suspended and forged in the Bandon workshop.Cardas Audio Clear Beyond Speaker Cable
Read the Cardas Audio story
Cardas Clear Beyond Speaker Cable

George Cardas was a telephone-company engineer who worked on transmission lines, and he brought that training to audio cable. His founding idea was simple: when every strand in a conductor is the same size, every strand rings at the same frequency, and the ear hears it as glare. He wound the strands in concentric layers, each stepped in size by the Golden Ratio, patented the design in 1986, and founded Cardas Audio the following year in Southern California.

In 1992 the company moved north to Bandon, a small town on the southern Oregon coast known for its cranberry bogs. The family chose it as a place where the business could grow and the people who worked there could afford homes, and most of the staff made the move with them. Cardas has been an Oregon company ever since. It is one of Bandon's larger employers, and people who came north in 1992 work beside people who grew up in town.

Every Cardas cable is built in Bandon. About fourteen people braid the Golden Section conductors on machines adapted from century-old designs, forge the terminations on the upper speaker cables, and finish each cable by hand. The copper is American, drawn to George Cardas's own process. A 2022 film, American Made, followed a Clear Beyond speaker cable through the Bandon workshop from braiding to forged connector. Every cable carries a lifetime warranty.

The company's second defining idea arrived in 2008 with Matched Propagation, a patented conductor in which the twist of each strand layer is set so that the signal moves through the copper at the same speed as through the insulation around it. It became the basis of the Clear line, introduced in 2010, which today runs from Clear Sky through Clear Cygnus, Clear Reflection and Clear to Clear Beyond.

Cardas remains a family business. Angela Cardas Meredith, George's daughter, manages the company, and George Cardas is still its head designer. Pearl Audio has been a Cardas dealer for more than twenty years, since our founding years. Cardas is a fellow Oregon company, a few hours down the coast from Portland, and we know the people who build these cables by name.

The complete Cardas Audio story and technology library

Cardas Audio at Pearl Audio

Pearl Audio has been a Cardas dealer for more than twenty years. Cardas was one of the brands of our founding years, and it is an Oregon company, built in Bandon a few hours down the coast.

It began at a hi-fi show in Silverdale, Washington, when the store was about eight months old. Setting up the day before the show, John Loranger broke the only two-meter balanced interconnect he had brought, and walked down the hall to the Cardas room to ask for help. Brian Von Bork handed him a complete set of Golden Reference cables for the weekend. By Sunday John had asked to become a Cardas dealer and written a check for the cables, which served as the store's reference set for years. Brian is still at Cardas, and we are still a Cardas dealer.

We carry the range from Iridium and Parsec through Clear Sky, Clear Cygnus, Clear Reflection and Clear to Clear Beyond, with the phono, digital and power cables, and we can order any length, termination or internal bi-wire configuration Cardas builds. We help match the tier to the system, so the money goes where it is audible, and we handle the Cardas trade-in program when it is time to move up a tier. Cardas cables are built to order and carry a lifetime warranty, and we can arrange re-termination or repair through Bandon.

The Pearl Audio experience

How we work with you

A system at this level should be heard, thoughtfully matched, and properly set up. From the first audition to long-term ownership, you work with the same people, in person.

  1. 01

    Listen first

    The Clear Cygnus Phono is not in our rooms at present. When it is the right piece for a client we arrange a demonstration unit from the manufacturer and set it up for a private session.

  2. 02

    Delivery and installation

    We deliver and install throughout the Portland area, taking care of placement, connections, ventilation and system configuration ourselves.

  3. 03

    Support for as long as you own it

    We support everything we sell for as long as you own it, whether the answer comes by phone, in your home, or through factory service.

  4. 04

    A path for what comes next

    Trade-in assistance and qualifying 100% Trade-Up options give you flexibility when your listening priorities or your system change.

Search