Swipe or use the previous and next buttons to browse. Select an image to open a magnified view.
Burmester · BX Series
$110,000 per pair
Not currently in our rooms. For a serious buyer we will often bring a piece in from the manufacturer for a private session — tell us about your system and what you are weighing it against, and we will advise.
Burmester · BX Series
The BX100 is Burmester's four-way floorstander: a free-standing AMT tweeter, two 17 cm polypropylene-carbon drivers and two 26 cm side-firing woofers in a 1.5 m cabinet whose colors and side panels you configure.
Price is for a pair in a standard cabinet color. Special metallic cabinet paints add $10,000 per pair.
Authorized Burmester dealer · Delivery and installation by Pearl Audio · Trade-ins welcome
The story
The BX100 is the loudspeaker Burmester introduced in 2024 to sit between the B-Series and the BC150. It is a four-way bass reflex design with crossover points at 130 Hz, 240 Hz and 2.2 kHz. The Air Motion Transformer stands free in its own block on top of the cabinet, which gives it wide dispersion and a large listening area and makes it the visual center of the design. Below it a 17 cm midrange and a 17 cm midbass driver, both with ultra-light polypropylene and carbon-fiber cones, cover the voice range, and two 26 cm sandwich-cone woofers of glass fiber and polyester fabric fire from the sides for deep, controlled bass with large diaphragm area.
The cabinet is modular and heavily reinforced, with a new damping architecture to keep the enclosure quiet, and its gently curved, almost organic shape is meant to fit living spaces rather than dominate them. Gold-plated copper bridges on the terminal panel let the owner fine-tune the balance to the room and placement, and the internal wiring is laid out for low-loss transmission. Burmester rates the BX100 at 89 dB sensitivity, 3 Ω nominal impedance, 37 Hz to 24 kHz within 3 dB and 350 W nominal load capacity. Each speaker weighs 135 kg on its feet, or 141 kg on the optional spikes.
Alan Sircom reviewed the BX100 for hi-fi+ and judged it a significant step for Burmester as a loudspeaker maker, praising its clarity, coherence and the integration of the side-firing bass, while noting that its size, 3 Ω impedance and placement deserve care. Burmester's own 218 or 259 are the natural amplifiers; a 232 with the DAC module can drive it in a smaller system, and we can set it up either way in our Portland showroom.
What makes the BX100 unusual is the configuration. The cabinet comes in five standard finishes, white or black in matt or gloss, or middle-gray matt, with three metallic special paints at a surcharge; the waist, side panels and front cover are chosen separately from ten colors, so the speaker can be made to blend in or to contrast. The side panels and other design elements are replaceable, so a BX100 can be refinished later.
Waist, side panels and front cover are chosen separately from ten colors: Deep Black, Subtle Aluminum, Rich Navy, Rich Bordeaux, Delicate Chartreuse, Serene Sky Blue, Fine Graphite, Vivid Sage, Shadow Off White and Solid White. Spikes, replacement side panels and front covers are available as accessories.
| Type | 4-way bass reflex floorstanding loudspeaker |
| Tweeter | Air Motion Transformer, free-standing |
| Midrange | 6.7 in (17 cm) polypropylene and carbon fiber cone |
| Midbass | 6.7 in (17 cm) polypropylene and carbon fiber cone |
| Bass | 2 × 10.3 in (26 cm) side-firing sandwich cone, glass fiber and polyester fabric |
| Crossover frequencies | 130 Hz / 240 Hz / 2,200 Hz |
| Frequency response (±3 dB) | 37 Hz – 24 kHz |
| Sensitivity (2.83 V / 1 m) | 89 dB |
| Impedance | 3 Ω nominal |
| Power rating (DIN EN 60268-5) | 350 W nominal |
| Dimensions (H × W × D) | 57.7 × 11.4 × 26.0 in (1,466 × 290 × 660 mm) with feet; 59.5 × 13.4 in (1,511 × 340 mm) high and wide with spikes |
| Weight | 298 lb (135 kg) each with feet; 311 lb (141 kg) with spikes |
| Finish | Five standard cabinet colors, three metallic special paints; ten waist and side panel colors |
| Sold as | Pair |
Burmester BX100 product page and specifications (Burmester Home Audio)
Burmester's loudspeakers, from the B-Series to the Signature Line; all are priced per pair.
Partner the BX100 with the 218 or 259, or with the 232 integrated in a one-box system.
Plan your Burmester system with Pearl Audio
Pearl Audio is an authorized Burmester dealer. Contact us to arrange an audition of the BX100 in our Portland showroom and to configure the cabinet, waist and side panel colors for your room. Call (503) 222-2599 or email sales@pearlaudio.com.
The Pearl Audio experience
A system at this level should be heard, thoughtfully matched, and properly set up. From the first audition to long-term ownership, you work with the same people, in person.
The BX100 Loudspeaker is not in our rooms at present. When it is the right piece for a client we arrange a demonstration unit from the manufacturer and set it up for a private session.
We deliver and install throughout the Portland area, taking care of placement, connections, ventilation and system configuration ourselves.
We support everything we sell for as long as you own it, whether the answer comes by phone, in your home, or through factory service.
Trade-in assistance and qualifying 100% Trade-Up options give you flexibility when your listening priorities or your system change.
