Burmester · B-Series

Burmester B18 Loudspeaker

$19,000 per pair

On demonstration in our Portland showroom

Burmester · B-Series

The B18 is the entry to Burmester loudspeakers: a 42-inch, 2½-way floorstander with a ring-radiator tweeter and two 17 cm drivers, built in Berlin and finished like the rest of the B-Series.

Price is for a pair in a standard finish. Custom special paint for the B-Series adds $6,000 per pair.

2½-way
bass reflex, front-firing
88 dB
sensitivity at 2.83 V / 1 m
42 Hz
bass extension, ±3 dB
77 lb
per speaker (35 kg)

Authorized Burmester dealer · Delivery and installation by Pearl Audio · Trade-ins welcome

The story

The B18 is a 2½-way bass reflex loudspeaker with all drivers on the front. The tweeter is a ring radiator with a titanium membrane developed exclusively for Burmester, and the two 17 cm glass-fiber paper-cone drivers are an evolution of a proven unit: one works as a mid-woofer in its own closed chamber for a clean midrange, and the other adds bass below it. The crossover is housed in a separate cabinet chamber. The massive MDF front and a cabinet optimized with finite-element analysis keep resonance low and bass precise.

The base is built on a sandwich principle from a high-molecular thermoplastic and other materials with high internal damping, which decouples the speaker from the floor. A bass switch on the rear and an optional foam cylinder for the port adapt the low end to the room and to taste. Burmester rates the B18 at 88 dB sensitivity, 4 Ω impedance, 42 Hz to 30 kHz within 3 dB and 120 W power handling, so a 101 integrated amplifier drives it comfortably.

Alan Sircom reviewed the B18 for hi-fi+ and called it easy to live with and highly detailed, delivering far more than its price suggests, worth considering even by people who do not own Burmester electronics. In 2022 the B18 was brought into line with the B28 and B38, gaining the screwless front and the common range of cabinet and front finishes; the review covers the earlier version. The B18 and 101 are the smallest complete Burmester system we offer, and we can set them up for you in our Portland showroom.

The B18 is finished in white, middle-grey, black or American walnut, all matt, with a silver or black anodized front. Custom colors are available at a surcharge through Burmester's BESPOKE program.

Key technologies

  • Ring-radiator tweeter. A titanium-membrane ring radiator developed exclusively for Burmester for open, transparent treble.
  • Closed-chamber mid-woofer. The 17 cm mid-woofer has its own sealed enclosure for a clean, focused midrange.
  • Separate crossover chamber. The crossover is isolated in its own chamber for clean transitions and a coherent sound.
  • Sandwich base. A decoupling base of high-damping thermoplastic and other materials isolates the cabinet from the floor.
  • FEM-optimized cabinet. The enclosure and massive MDF front were optimized by finite-element analysis to reduce resonance.
  • Bass adjustment. A rear bass switch and optional foam cylinder adapt the low end to the room.

Finishes

  • White matt lacquer; silver or black front
  • Middle-Grey matt lacquer; silver or black front
  • Black matt lacquer; silver or black front
  • American Walnut matt veneer; silver or black front

All four standard finishes are the same price. Custom special paint adds $6,000 per pair.

Specifications
Type 2½-way bass reflex floorstanding loudspeaker, front-firing
Tweeter Ring radiator, titanium membrane
Midrange / mid-woofer 6.7 in (17 cm) glass fiber paper cone, closed chamber
Bass 6.7 in (17 cm) glass fiber paper cone
Crossover frequencies Not published by Burmester
Frequency response (±3 dB) 42 Hz – 30 kHz
Sensitivity (2.83 V / 1 m) 88 dB
Impedance 4 Ω
Power rating 120 W
Dimensions (H × W × D) 42 × 8 × 15.8 in (approximately 1,067 × 203 × 401 mm)
Weight 77 lb (35 kg) each
Finish White, middle-grey, black or American walnut, all matt; silver or black front
Sold as Pair

Burmester B18 product page and specifications (Burmester Home Audio)

Where it sits in the range

Burmester's loudspeakers, from the B-Series to the Signature Line; all are priced per pair.

Partner the B18 with the 101 or 232 integrated amplifier and the 151 MK2 Musiccenter.

Reviews

Plan your Burmester system with Pearl Audio

Pearl Audio is an authorized Burmester dealer. Contact us to arrange an audition of the B18 with the 101 or 232 in our Portland showroom. Call (503) 222-2599 or email sales@pearlaudio.com.

The Pearl Audio experience

How we work with you

A system at this level should be heard, thoughtfully matched, and properly set up. From the first audition to long-term ownership, you work with the same people, in person.

  1. 01

    Listen first

    Hear the B18 Loudspeaker by appointment in one of our two purpose-designed demonstration rooms, with your own music and time to compare without pressure.

  2. 02

    Delivery and installation

    We deliver and install throughout the Portland area, taking care of placement, connections, ventilation and system configuration ourselves.

  3. 03

    Support for as long as you own it

    We support everything we sell for as long as you own it, whether the answer comes by phone, in your home, or through factory service.

  4. 04

    A path for what comes next

    Trade-in assistance and qualifying 100% Trade-Up options give you flexibility when your listening priorities or your system change.

Search