Koetsu Rosewood cartridge fitted to a Linn LP12 at Pearl Audio

Koetsu technology

The engineering behind Koetsu

Koetsu gives its technologies names because each one solves a specific problem. Here is what each does, where it came from, why it matters in a system, and what you may hear.

Up to six months of lacquer over rosewoodSince 1998

Urushi lacquer bodies

The Urushi models and the Rosewood Signature are rosewood bodies finished in urushi, the natural lacquer of Japanese craft, applied in layers that each cure before the next. Koetsu says the process can take up to six months, and that the lacquer keeps hardening for years, which progressively damps the body. Read the deep diveClose

What it does

Urushi is the sap of the lacquer tree, the material of Japanese lacquerware for centuries; a tree takes about fifteen years to mature and gives up only around 200 grams of it. Koetsu applies it over a rosewood body in several layers, which the company compares to a piano-grade finish. Each layer must cure before the next can go on, so the lacquering process can take up to six months, and a cartridge ships only when the finish is complete. The lacquer does not stop changing when it leaves the workshop: urushi keeps hardening for years, and Koetsu says the body's resonance characteristics evolve over time, leading to reduced resonances. The current Urushi models differ in the color and treatment of that finish. The Black is a deep black lacquer; the Gold adds a layer of beech resin under its gold finish; the Tsugaru and Wajima share their names with regional lacquer traditions, though Koetsu's own pages do not spell out the connection; the Vermillion is red. The Rosewood Signature is also listed as rosewood with urushi lacquer, in a plainer finish, and the generator under the lacquer is the same single-coil 0.4 mV design in all of them except the double-coil Vermillion.

Why it matters in a system

A cartridge body is the mount between the generator and the tonearm, and whatever it stores or rings at comes back into the signal. Lacquer that has cured hard over wood gives Koetsu a body that is light, stiff and damped in a way neither bare wood nor metal is, and the curing continues for years after purchase. The finish is also why no two Urushis look alike, and why a worn one is rebuilt inside its own body rather than replaced.

What you may hear

The quality reviewers have reached for since the Urushi first came to the United States: Michael Fremer, reviewing it in Stereophile in 1998, called it one of the two most liquid cartridges he had auditioned, and Gary Lea of Dagogo wrote that the Urushi midrange is absolute magic.

Drawn over the copper, not platedSince 1998

Silver-sheathed 6N copper coils

Koetsu winds its coils with copper refined to 99.9999 percent and sheathed in silver by a cladding process: a thin silver shield is drawn over the conductor rather than electroplated onto it. Once reserved for the Platinum models and the Vermillion, the wire is now used on every current Koetsu. Read the deep diveClose

What it does

The coils of a moving-coil cartridge are the generator: a few turns of very fine wire that swing in a magnetic gap as the stylus moves, and everything the cartridge produces passes through them. Koetsu winds its coils with copper refined to 99.9999 percent, six nines, and sheathes it in silver by a cladding process. A thin silver shield is drawn over the copper conductor, the way a tube is drawn over a rod, rather than deposited by electroplating; Koetsu's own wording is that it is not simply silver-plated. Jonathan Scull described the same process when he reviewed the Rosewood Signature Platinum for Stereophile in 1998: silver-clad six-nines copper, made by drawing a silver sheath over copper conductors. For most of Koetsu's history the silver-clad wire was reserved for the Platinum and stone-bodied models and the Vermillion, and the other Urushis were wound with plain copper; by 2022 all five Urushi models had been moved to it, and the revived company lists silver-sheathed 6N copper coils on the Rosewood Signature, every Urushi and every stone-bodied cartridge. The stone models get the most tightly matched coils and cores of each batch. The coils are wound on square plate formers of very pure iron.

Why it matters in a system

A cladding puts the conductivity of silver at the surface of the wire, where the highest frequencies travel, without the boundary of a plated layer, and the purity of the copper underneath keeps the wire's own character out of a signal measured in fractions of a millivolt. Because the same wire now runs from the Rosewood Signature up, the differences between Koetsu models lie in the magnet, the number of coils and the body rather than in the winding.

What you may hear

The refinement at the top of the range that Koetsu is known for. Alex Halberstadt of Stereophile praised the revived Rosewood Signature's rich timbres, soundstage depth and color, and found the double-coil Vermillion ahead of it in dynamics and transient speed.

The Platinum generatorSince 1998

Platinum magnets

The standard Koetsus use samarium-cobalt or Permendur magnets and give 0.4 mV. The Platinum models replace them with a platinum-cobalt alloy magnet, one of the strongest permanent-magnet materials known, paired with the most tightly matched silver-sheathed coils, for 0.3 mV and the sound Koetsu built its stone-body reputation on. Read the deep diveClose

What it does

Every Koetsu is a moving-coil design, and the magnet sets how much signal a given coil can produce and how the generator behaves. The Urushi models and the Rosewood Signature use samarium-cobalt or Permendur magnets with a single coil and give 0.4 mV. The Platinum models replace that magnet with a platinum-cobalt alloy, which hi-fi+ described as one of the most powerful permanent magnet materials known, and pair it with the most tightly matched silver-sheathed coils and cores from each batch. Output falls to 0.3 mV, because the Platinum generator uses fewer turns of wire, and coil resistance is about 6 ohms. Koetsu's history page credits Yoshiaki Sugano with pioneering high-purity materials in cartridges, including 6N copper and rare platinum-iron magnets. Positive Feedback reported in 2015 that the platinum magnets were a medical-grade material no longer manufactured, which Sugano had bought in bulk; the revived company has not said whether today's stone bodies draw on that stock. The Platinum generator is what every stone-bodied Koetsu carries, the Onyx Platinum, Tiger Eye Platinum and Blue Lace, and it was the generator of the Rosewood Signature Platinum, which put the stone-body motor in a lacquered rosewood body weighing 9 grams.

Why it matters in a system

The magnet is the fixed half of the generator and not something an owner can change, so the choice between the samarium-cobalt Urushis and the Platinum stone bodies is the largest single decision in the line. The lower output asks a little more of the phono stage, a 26 dB step-up or a high-gain moving-coil input, but it comes with the weight and control reviewers have described from the Platinum models for nearly thirty years.

What you may hear

Michael Fremer, reviewing the revived Onyx Platinum for Tracking Angle in 2026, wrote that the cartridge slams Thor's hammer down on bass notes while the control is absolute, and that it was not adding warmth; Jonathan Scull found the 1998 Rosewood Signature Platinum superb and incredibly satisfying in a deep, profoundly musical way.

Onyx, tiger eye and blue lace agateSince 1998

Solid stone bodies

Koetsu's top models are built into blocks of semi-precious stone, machined and polished into the body itself; in the company's words, the stone is the body of the cartridge rather than a decorative covering. Each is unique, each carries the Platinum generator, and at 12 to 13 grams each needs an arm that can carry it. Read the deep diveClose

What it does

Koetsu's top models are built into blocks of semi-precious stone: onyx, tiger eye quartz and blue lace agate, chosen in Koetsu's words for grain and coloration. The stone is machined and polished into the body itself; as the company puts it, the stone is the body of the cartridge rather than a decorative covering. The generator inside is the Platinum motor with silver-sheathed coils and the Sugano-design stylus, and Koetsu says the stone models share construction details, so what separates an Onyx from a Tiger Eye or a Blue Lace is the stone. Because each block is a natural material, every cartridge is unique, and the weight varies by unit, between 12 and 13 grams against 9.4 grams for a rosewood Koetsu. That mass matters: Koetsu's own note is that tonearm compatibility should be checked before a stone body is ordered, and Michael Fremer measured an arm-cartridge resonance near 9 Hz with the Onyx Platinum in an SAT arm. The Onyx was the first stone Koetsu and the one made in Yoshiaki Sugano's lifetime; the Jade, Coralstone, Blue Lace, Tiger Eye and the blue dumortierite Azule followed under Fumihiko Sugano. After the company closed in 2023, stone production was the last thing to return: the new Onyx Platinum was shown at AXPONA in April 2026.

Why it matters in a system

The body is where the energy the stylus puts into the structure either rings or is absorbed, and a dense polished stone behaves differently from lacquered wood: heavier, stiffer, with its own damping. With the Platinum generator inside it, the stone gives the top Koetsus the effortless, weighty character reviewers have described for decades, at the price of a heavier cartridge that needs a medium-to-high-mass arm to carry it.

What you may hear

Myles Astor of Positive Feedback heard absolutely effortless, tape-like dynamics from the Azule Platinum; Jimmy Hughes of hi-fi+ wrote of the Coralstone's fine luxurious quality of sound that transcends the sum of the parts; and Fremer found the new Onyx Platinum's balance smooth and linear, with deep bass control.

The moving partsSince 1998

Boron cantilever, pre-aged damper and the Sugano stylus

A solid boron rod carries a line-contact diamond, listed as Fine Line or Line Contact on the rosewood models and as Sugano Design on the stone bodies. The rubber suspension is artificially aged under license before assembly, so the cartridge's compliance does not drift in service. Read the deep diveClose

What it does

Between the groove and the coils are three parts Koetsu specifies closely. The cantilever is a solid rod of boron, light and very stiff, which carries the stylus motion to the coils without flexing on fast transients; a one-piece diamond cantilever was offered as an option in the past. The diamond is a line-contact profile, listed as Fine Line or Line Contact on the Urushi and Rosewood models and as Sugano Design on the stone bodies; Michael Fremer, examining the revived Onyx Platinum in 2026, believed it to be a line contact like the original. StereoNET's appreciation of the brand describes the boron being slotted to take the diamond, with a small rectangular reinforcing plate around the shank that resembles the tsuba, the hand guard, of a Japanese sword, a detail in keeping with a founder who learned metallurgy from sword work. The suspension is a rubber damper that is pre-aged under license from the damper manufacturer, so the rubber has already done the hardening it would otherwise do over its first years of use and the cartridge's compliance does not change in service. The coils sit on square plate formers of ultrapure iron. Together these give a compliance of 5 to 6 x 10^-6 cm/dyne, tracking at 1.8 to 2.0 grams, with response quoted to 100 kHz.

Why it matters in a system

A line-contact diamond reaches the finest modulation in the groove and spreads its load over more vinyl than an elliptical, and a boron cantilever moves it with the least mass and delay. The pre-aged damper is the quieter contribution: a Koetsu's low compliance is part of its design, and a suspension that has stopped changing before it ships means the cartridge set up on day one is the one its owner will still have in year five.

What you may hear

Fremer measured the new Onyx Platinum tracking a 90-micron band cleanly with 27 dB of channel separation, and Part-Time Audiophile found Koetsus singularly impressive at relegating surface noise further back into the soundstage.

Matching a KoetsuSince 1998

Low compliance, low output: arms and loading

Koetsus are low-compliance cartridges of 9.4 to 13 grams with 0.2 to 0.4 mV of output. Koetsu specifies a rigid medium-to-high-mass arm of 12 to 20 grams, 1.8 to 2.0 grams of tracking force, and a low load, 5 to 40 ohms through a step-up transformer or 100 to 1,000 ohms into a moving-coil input. Read the deep diveClose

What it does

A Koetsu is a low-compliance, low-output cartridge, and it rewards careful matching. Compliance is 5 to 6 x 10^-6 cm/dyne, stiff by modern standards, and the cartridges weigh from 9.4 grams for the rosewood models to 12 or 13 grams for the stone bodies, so Koetsu specifies a medium-to-high-mass tonearm of 12 to 20 grams effective mass (12 to 18 for the Vermillion) and a tracking force of 1.8 to 2.0 grams. Michael Fremer's advice in 1998 was ultra-rigid-bearing tonearms of medium to high mass; in 2026 he wrote that the cartridge's low-frequency power needs a tonearm that can control it. Output is 0.4 mV for the single-coil Urushis and Rosewood Signature, 0.3 mV for the Platinum stone bodies and 0.2 mV for the double-coil Vermillion, from 5 to 6 ohms of coil resistance, so the phono stage needs gain and the load should be low. Koetsu recommends 5 to 40 ohms through a step-up transformer or 100 to 1,000 ohms into a moving-coil input, and adds that Sugano-san specified anything from 5 ohms to 100 kilohms, so careful experimentation and gradual optimization are essential. Reviewers converge: Fremer preferred 100 ohms to 47k, Dick Olsher found 50 ohms best for the Rosewood Signature, and Alex Halberstadt ran the Vermillion at just over 100 ohms through a 20-times step-up.

Why it matters in a system

Much of what is said about how a Koetsu sounds describes a Koetsu in the wrong arm or at the wrong load. A rigid, heavier arm keeps the arm-cartridge resonance where it belongs and lets the low end these cartridges produce be controlled; a low load and enough quiet gain let a 0.2 to 0.4 mV signal arrive without hiss or glare. With those right, the cartridge's character is the only thing left to hear.

What you may hear

At the right load, Halberstadt wrote that the Urushi Vermillion is the cartridge he would choose over any he had heard, and Olsher called the Rosewood Signature a Goldilocks moving coil with a big-sky midrange and incredibly velvety textures.

Back to Japan, to the same handsSince 2024

Rebuild, not retip

Koetsu does not retip. A worn cartridge goes back to Japan and is rebuilt by the craftsmen who made it, with a new generator inside the owner's own body. The service was relaunched in May 2024 for every Koetsu ever made and continues under the revived company, through authorized dealers. Read the deep diveClose

What it does

Koetsu has never retipped a cartridge. When a Koetsu wears, it goes back to Japan and is rebuilt by the craftsmen who made it: Jonathan Scull reported in 1998 that refurbishing was done in Japan and that all parts except the magnets and the body were replaced or upgraded, and Alex Halberstadt summed up the policy in 2026, that worn cartridges were rebuilt entirely rather than retipped. The practice outlived the original company. In May 2024, a year after production ceased, Arturo Manzano's Analog2Fidelity announced a worldwide service to rebuild every Koetsu cartridge ever manufactured, using the original craftsmen; it was the first step toward the relaunch of the brand the following April. The service is unchanged under the revived company: rebuilds are performed in Japan by the original Koetsu craftsmen using authentic materials and original techniques, which in practice means a new cantilever, stylus, coils and suspension inside the owner's own lacquered rosewood or stone body. An owner goes through an authorized dealer, who coordinates the shipment to Japan and back. Current rebuild prices are not published; in 2015 a stone-body rebuild was listed at $4,450, against $10,950 for a new Azule Platinum at the time.

Why it matters in a system

A rebuild program is what makes a cartridge at this price a long-term purchase rather than a consumable. Because the body and the magnet are the parts that do not wear, a thirty-year-old Rosewood or Onyx can come back with a new generator and the same voice, and because the rebuilders are the people building the new cartridges, there is no difference in method between the two.

What you may hear

A rebuilt Koetsu is, by Koetsu's account, a Koetsu built again, not a retip in another shop's style. Steve Huntley of AXISS Audio, who has owned a couple of Urushi Vermillions, said there is nothing like it, which is the reason to keep one going.

Search