← Back to your LP12 build

Technics · Reference Class

Technics Direct Drive Turntable SP-10RE-S

$14,200

The Technics story

Not currently in our rooms. For a serious buyer we will often bring a piece in from the manufacturer for a private session — tell us about your system and what you are weighing it against, and we will advise.

Technics · Reference Class

The Reference Class motor unit on its own: the double-coil twin-rotor coreless direct drive, 7.9 kg platter and separate control unit of the SL-1000RE, for installation in a plinth of the owner's choosing with the tonearm of their choice.

Motor unit and control unit only; no plinth, tonearm or cartridge. For the complete turntable see the SL-1000RE.

0.015%
wow and flutter (W.R.M.S.)
7.9 kg
brass and aluminum platter with tungsten weights
4.0 kg·cm
starting torque (0.39 N·m)
40.2 lb
motor unit (18.2 kg) plus 2.1 kg control unit

Authorized Technics dealer · Delivery and installation by Pearl Audio · Trade-ins welcome

The story

The SP-10RE continues the tradition of the original SP-10 of 1970, the first direct-drive turntable, which was sold as a motor unit for broadcasters and enthusiasts to build into their own plinths. The RE is the current version: a coreless direct-drive motor with two rotors, twelve poles and eighteen coils, the coils offset by 60 degrees on each side to stiffen the board and cancel fine vibration, developing 0.39 N·m of torque. The platter is brass and die-cast aluminum weighted with tungsten, 7.9 kg, on engineering-plastic thrust bearings, and the motor holds it to wow and flutter of 0.015%, which Technics describes as the limit of measurement.

The 365 mm square motor unit is supplied with its separate control unit, which houses the switching power supply and noise-reduction circuitry away from the cartridge and sets speed to two decimal places on an OLED display with ±16% adjustment at 33⅓, 45 and 78 rpm. The link between the two units is designed to resist external noise. Everything else, the plinth, the arm, the arm board and the cartridge, is the owner's to choose, which is the point: the SP-10RE is the deck for someone who wants a twelve-inch arm, a slate or hardwood plinth, or two arms.

The SL-1000RE is the same motor and control unit in Technics' own plinth with its ten-inch arm, and is the simpler route to the same performance. Pearl Audio can advise on plinths, arms and cartridges to suit.

Key technologies

  • Double-coil twin-rotor coreless motor. Twelve poles and eighteen coils, offset 60° on each side; 0.39 N·m torque; no cogging.
  • 7.9 kg platter. Brass and die-cast aluminum with tungsten weights, on engineering-plastic thrust bearings.
  • Separate control unit. Switching supply and noise-reduction circuitry away from the pickup; speed set to two decimal places.
  • Noise-resistant link. Communication between motor and control units designed to resist interference.
  • Open installation. Motor unit for any plinth and tonearm the owner specifies.
Specifications
Type Direct-drive turntable motor unit with separate control unit; brushless DC coreless motor, double-coil twin-rotor, 12 poles / 18 coils
Speeds 33⅓, 45 and 78 rpm; pitch ±16%, set to two decimal places
Starting torque 0.39 N·m (4.0 kg·cm)
Wow and flutter 0.015% W.R.M.S.
Platter Brass and aluminum die-cast with tungsten weights, 323 mm diameter, approx. 7.9 kg including mat
Tonearm Not supplied
Power AC 110 – 240 V, 50/60 Hz; 10 W; approx. 0.05 W standby
Motor unit (W × H × D) 365 × 109 × 365 mm (14.4 × 4.3 × 14.4 in); approx. 18.2 kg (40.2 lb)
Control unit (W × H × D) 110 × 84 × 350 mm (4.3 × 3.3 × 13.8 in); approx. 2.1 kg (4.7 lb)
Finish Silver
Supplied Mat, EP adaptor, screw set, detachable handle, hex wrench, power lead

Technics SP-10RE product page and specifications

Where it sits in the range

The Reference Class motor unit, for custom plinths.

  • Technics SL-1500C: Premium Class, single-rotor coreless motor, built-in phono stage, Ortofon 2M Red, $1,499.99
  • Technics SL-1200GR2: Grand Class, single-rotor coreless motor, ΔΣ-Drive, silver, $2,499.99
  • Technics SL-1210GR2: Grand Class, single-rotor coreless motor, ΔΣ-Drive, black, $2,499.99
  • Technics SL-1200G: Grand Class, twin-rotor coreless motor, magnesium arm, silver, $4,999.99
  • Technics SL-1210G: Grand Class, twin-rotor coreless motor, magnesium arm, black, $4,999.99
  • Technics SP-10RE (this model)
  • Technics SL-1000RE: Reference Class complete turntable with ten-inch arm, $24,699.99

Plan your Technics system with Pearl Audio

Pearl Audio is an authorized Technics dealer. We can advise on plinths, tonearms and cartridges for a custom installation, and arrange a visit to our Portland showroom. Call (503) 222-2599 or email sales@pearlaudio.com.

The Technics story

The direct-drive turntable, from the broadcast studio and the DJ booth to the listening room, since 1970.

Founded 1965 in Osaka, Japan; built today in Utsunomiya, Japan, and in Malaysia by Matsushita Electric, now Panasonic · technics.com

Milestones

  1. 1965 Technics 1 Matsushita Electric, now Panasonic, gives the name Technics to its finest loudspeaker. The name comes from the word technology.
  2. 1970 SP-10 The first direct-drive turntable. Broadcasters around the world adopt it, the BBC among them.
  3. 1971 SL-1100 Direct drive for the home, with the tonearm built in. It is the turntable DJ Kool Herc goes on to use at block parties in the Bronx.
  4. 1972 SL-1200 A more compact direct-drive record player, and the start of a series that runs to this day.
  5. 1973 The Bronx In August, DJ Kool Herc uses a pair of Technics direct-drive turntables to extend the drum breaks on his records. Technics calls it the beginning of hip-hop.
  6. 1975 SP-10MK2 Quartz-locked speed control and a separate power supply. It becomes a standard in broadcast and mastering studios.
  7. 1979 SL-1200MK2 and SL-10 The MK2 is the first turntable developed specifically for DJs. The same year the record-jacket-sized SL-10 appears; it later enters the collection of the Museum of Modern Art.
  8. 2010 Production ends After nearly four decades the SL-1200 goes out of production, its tooling worn out, and the Technics name is retired.
  9. 2014 Technics returns Panasonic brings the name back, with a new generation of engineers led by Michiko Ogawa.
  10. 2016 SL-1200G A new SL-1200 for listening at home: every part newly tooled, a coreless motor that removes cogging, and a platter of brass, aluminum and rubber.Technics SL-1200G Twin-rotor
  11. 2018 SP-10R and SL-1000R The first new SP-10 in almost forty years, hand-built in Japan, and the complete SL-1000R built around it.Technics SL-1000RE-S
  12. 2019 SL-1200MK7 and SL-1500C The DJ turntable returns in its seventh generation, and the SL-1500C arrives for home listening, with a phono stage built in.Technics SL-1500C-K
  13. 2023 SL-1200GR2 A new digital method of driving the motor, taken from Technics' reference amplifier, for smoother rotation.Technics SL-1200GR2 Single-rotor
Read the Technics story
The original Technics SL-1200 of 1972. Image: Technics

Technics began in 1965 as the name Matsushita Electric, the company now called Panasonic, gave to its finest loudspeaker, the Technics 1. The name comes from the word technology, and for sixty years it has stood for the part of the company where engineers are asked to build for music first. Amplifiers, tape decks, loudspeakers and early CD players followed, but one invention made the name known wherever records are played.

Direct drive

In 1970 Technics introduced the SP-10, the first direct-drive turntable. In place of a belt or an idler wheel, the platter sat directly on a slow-turning motor, which gave steady speed, quick starts and very little to wear out. Broadcasters around the world adopted it, the BBC among them. The SP-10MK2 of 1975 added quartz-locked speed control and became a studio standard, and a pair of them turn the cutting lathes at Bernie Grundman Mastering, where many of today's audiophile LPs are cut. The SL-1100 of 1971 brought direct drive to the home, and the SL-1200 followed in 1972.

The SL-1200 and the DJ

What happened next was not in anyone's plan. In the Bronx in August 1973, DJ Kool Herc used a pair of Technics direct-drive turntables at a party for his sister, isolating the drum breaks on his records to keep the dance floor moving. Technics itself calls that the beginning of hip-hop. The turntables suited the job because they were strong, came up to speed at once and held it, and DJs such as Afrika Bambaataa and Grandmaster Flash carried the idea into the mainstream.

Technics listened. The SL-1200MK2 of 1979 was the first turntable developed specifically for DJs, with a sliding pitch control and the other features they had asked for. Through the 1980s demand grew enormously and the SL-1200 became the standard in clubs around the world; a DJ with two of them and a mixer could fill the rooms where bands used to play. In the 1990s scratching and turntablism made it a musical instrument in its own right. By Technics' own count, 3.5 million SL-1200s were sold in the first 35 years, and no other turntable has been so widely used.

At home

Technics never stopped building turntables for listening at home. Through the 1970s and 1980s a direct-drive Technics was the first serious record player in a great many American households, and the record-jacket-sized SL-10 of 1979 entered the collection of the Museum of Modern Art. The qualities DJs prized are the ones a listener benefits from too: accurate speed, quiet running, easy setup, and a machine built to work for decades.

Silence, and a return

In October 2010 the SL-1200 went out of production; after nearly four decades the tooling had worn out, and the Technics name itself was retired. It returned in 2014, led by Michiko Ogawa, an engineer who is also a pianist, and in 2016 came a new SL-1200. It looks like the old one, but every part was newly tooled, and at its center is a new motor with no iron core. That removes the faint unevenness in rotation, known as cogging, for which direct drive had long been criticized. This time the turntable was designed for listening at home.

The line of the SP-10 returned in 2018 with the SP-10R and the complete SL-1000R, the first new SP-10 in almost forty years. The SL-1500C followed for listeners who want a simple, complete record player with a phono stage built in. The SL-1200GR2 of 2023 added a new digital method of driving the motor, taken from Technics' reference amplifier, for smoother rotation still.

What they weigh, and why

Technics turntables are heavy on purpose, because mass and damping keep vibration away from the stylus. The SL-1500C weighs about 22 pounds and the SL-1200GR2 about 25. The SL-1200G weighs nearly 40, and its platter of brass, aluminum and rubber accounts for almost 8 of them. The SL-1000R weighs 88.7 pounds before its separate control unit is counted, and its platter, brass on aluminum with tungsten weights set into the rim, weighs about 17.5. The platters of the SL-1200G and SL-1000R are balanced one at a time at the factory.

Where they are built

The SL-1200G and SL-1000R are built in Utsunomiya, about 80 miles north of Tokyo, in a small corner of a large Panasonic plant. A magazine that visited found a team of eleven people building them by hand. Each turntable is assembled from start to finish by one person, who has passed a course and tests of dexterity and accuracy before being allowed to do so; an SL-1000R has about 150 parts and takes around an hour and a half. Every unit is then measured for speed stability, listened to with records, and inspected under bright light before it is packed. The more affordable models, the SL-1200GR2 among them, are built at Panasonic's plant in Malaysia.

How they sound

Reviewers use much the same words for the current Technics turntables whatever the model: drive, timing and rhythmic authority; deep, solid bass; quiet backgrounds and stable images; and a clear, neutral view of the record. Of the SL-1000R they add a rich, generous midrange and a smooth sound free of grain.

The complete Technics story and technology library

Technics at Pearl Audio

At Pearl Audio we carry Technics for its turntables. The SL-1200 in its current versions and the SL-1500C are staples in the store, and we have carried and built the SL-1000R. We like them as a classic turntable that looks right beside heavily built systems, such as McIntosh amplifiers with Bowers & Wilkins loudspeakers.

On demonstration in Portland now

The Pearl Audio experience

How we work with you

A system at this level should be heard, thoughtfully matched, and properly set up. From the first audition to long-term ownership, you work with the same people, in person.

  1. 01

    Listen first

    The Technics Direct Drive Turntable SP-10RE-S is not in our rooms at present. When it is the right piece for a client we arrange a demonstration unit from the manufacturer and set it up for a private session.

  2. 02

    Delivery and installation

    We deliver and install throughout the Portland area, taking care of placement, connections, ventilation and system configuration ourselves.

  3. 03

    Support for as long as you own it

    We support everything we sell for as long as you own it, whether the answer comes by phone, in your home, or through factory service.

  4. 04

    A path for what comes next

    Trade-in assistance and qualifying 100% Trade-Up options give you flexibility when your listening priorities or your system change.

Search