← Back to your LP12 build

T+A Elektroakustik · R-Series

T+A Elektroakustik T+A G 2000 R Turntable

$11,990

Signature technologies

Not currently in our rooms. For a serious buyer we will often bring a piece in from the manufacturer for a private session — tell us about your system and what you are weighing it against, and we will advise.

T+A Elektroakustik · R-Series

The G 2000 R is T+A's belt-drive turntable, delivered complete with a Clearaudio-built carbon tonearm and the MC 2 moving-coil cartridge, and controlled by a DSP that shapes the motor's drive voltage.

Supplied with tonearm and MC 2 cartridge fitted. Phono stage is an optional built-in module (PHE-G R MC).

3.8 kg
die-cast aluminum platter
±0.02 %
wow and flutter
82 dB
rumble
0.75 mV
MC 2 cartridge output
Options and pricing

Authorized T+A Elektroakustik dealer · Delivery and installation by Pearl Audio · Trade-ins welcome

The story

Most turntables at this level arrive as a kit of decisions: deck, arm, cartridge, phono stage. T+A ships the G 2000 R as a finished instrument. The platter is a 3.8 kg pressure-cast aluminum disc on a zinc sub-platter, with a silicone rubber mat, running on a hardened, polished steel shaft in a close-tolerance brass bush. A crystal-referenced synchronous motor drives it by belt, and a DSP trims the voltage curve to the motor coils, including at start-up, which also makes the deck indifferent to mains frequency and voltage. Speed is switched electronically between 33⅓ and 45 from the front, with no belt to move.

The chassis is a solid MDF body with bonded aluminum skins and a sandwich-construction top, on four shock absorbers. The tonearm is a Clearaudio carbon design modified to T+A's specification, and it carries T+A's MC 2 cartridge: Micro Line stylus, 0.75 mV output, 9 µm/mN compliance, 2 g tracking force. An optional PHE-G R MC phono module fits inside the plinth, and R2-Link sockets let a T+A amplifier switch the deck on with the system.

The G 2000 R suits someone who wants a high-quality analog front end that works out of the box and matches the rest of an R-Series stack in size and finish. Its feet are not adjustable, so give it a level, solid shelf. We can arrange an audition in our Portland showroom and help with system matching, delivery and setup.

T+A began with loudspeakers in 1978, and its first stand-alone electronics appeared under the Pulsar name in 1986; the R series followed in 1992. The G 2000 R turntable arrived in 2015 alongside the PA 2000 R integrated amplifier and the PDP 3000 HV, and it is designed in Herford, where the company Siegfried Amft founded is still family-owned. Read the T+A story →

Key technologies

  • DSP motor control. A signal processor shapes the drive voltage to the synchronous motor's coils for even rotation, independent of mains quality.
  • Electronic speed change. 33⅓ and 45 rpm switched from the front panel; the belt stays put.
  • Heavy damped platter. 3.8 kg pressure-cast aluminum on a zinc inner platter with a silicone mat.
  • Resonance control. MDF body with bonded aluminum skins, sandwich-construction parts and four shock absorbers.
  • Clearaudio carbon arm and MC 2. Carbon-fiber tonearm built to T+A's specification, with T+A's Micro Line moving-coil cartridge fitted.
  • R2-Link. Automatic power-on from a T+A amplifier.

The PA 2000 R and PA 2500 R take the G 2000 R through their optional phono modules.

Finishes

  • Silver anodized (43) brushed aluminum
  • Black anodized (42) brushed aluminum
Specifications
Type Belt-drive turntable with tonearm and MC cartridge
Motor Crystal-controlled synchronous motor with DSP-optimized coil voltage
Speeds 33⅓ and 45 rpm, electronically switched
Wow and flutter ±0.02 %; rumble 82 dB
Platter Pressure-cast aluminum, 3.8 kg, silicone rubber mat; hardened steel shaft in a brass bush
Tonearm Modified Clearaudio carbon-fiber tonearm
Cartridge T+A MC 2 moving coil: 0.75 mV, Micro Line stylus, 9 µm/mN, 20 mN (2 g), 8 g, 100 Ω load; 20 Hz – 45 kHz
Phono stage Optional built-in PHE-G R MC module
Control R2-Link automatic power-on
Power 100 – 240 V, 40 W; standby < 0.5 W
Dimensions (H × W × D) 16 × 46 × 38 cm overall (6.3 × 18.1 × 15.0 in); body 8.2 cm tall
Weight 14 kg (30.9 lb)
Finishes Silver anodized (43) or black anodized (42)

T+A G 2000 R product page and specifications

Where it sits in the range

The R-Series is T+A's full-size line below the HV-Series. Siblings, least to most expensive:

Pair it with the PA 2000 R or PA 2500 R; either amplifier takes an optional phono module if you prefer not to use the module in the turntable.

Reviews

Plan your T+A system with Pearl Audio

Pearl Audio is an authorized T+A dealer. We can arrange an audition in our Portland showroom and help with system matching, delivery and setup. Call (503) 222-2599 or email sales@pearlaudio.com.

Signature technologies

The engineering behind the T+A Elektroakustik T+A G 2000 R Turntable

T+A Elektroakustik gives its technologies names because each one solves a specific problem. Here is what each does, where it came from, why it matters in a system, and what you may hear.

Theory and application under one roofSince 1978

Designed, built and measured in Herford

Every T+A component is designed, assembled and measured at the company's own buildings in Herford, where it has been since 1988: circuit design, board layout, software, the MusicNavigator app, final assembly and a measurement protocol for every unit. Surface-mount board assembly is placed with a specialist using T+A-supplied parts; about 95 percent of production is in-house. Read the deep diveClose

What it does

T+A has occupied its own buildings in Herford since 1988 and added an administration, sales and laboratory building in 2003. A factory visit in April 2025 counted about 90 employees, 14 of them in research and development; T+A itself describes a team of fifteen designers and developers plus seven service technicians. The scope kept in-house runs from design, PCB layout and certification to assembly, measurement, operating-system programming and app development; the one step placed outside is surface-mount component placement, done by a specialist assembler using components T+A supplies, after which the boards return for final assembly and test. There are no assembly lines or automated placement machines, and nothing leaves the works without a measurement protocol. The company's own description is that it builds acoustic treasures rather than mass products, and it reports returning more than 98 percent of devices of any age to working condition when they come back for service. The engineering continuity is long: Lothar Wiemann, who joined as a student and developed the first electronics in 1982, was chief developer for 39 years before handing over to Jörg Küpper. In the United States, T+A North America in St. Marys, Georgia has handled distribution since August 2021, with service through Pyramid Audio in Austin and Audio Design and Service in Burbank.

Why it matters in a system

A product made in one place by the people who designed it can be supported for as long as its owner wants to keep it, and T+A's factory upgrades, the ASA G3 streaming boards fitted to players from 2017, are the practical form of that. It is also why a T+A system sounds consistent from the Series 200 to the HV line: the same small team designed all of it.

What you may hear

Jim Austin, in Stereophile on the MP 3100 HV: more than any other component he had had in his system, it radiated attention to detail. Michael Manousselis, who imported the brand to North America: they don't leave things to luck or to chance.

The Pearl Audio experience

How we work with you

A system at this level should be heard, thoughtfully matched, and properly set up. From the first audition to long-term ownership, you work with the same people, in person.

  1. 01

    Listen first

    The T+A G 2000 R Turntable is not in our rooms at present. When it is the right piece for a client we arrange a demonstration unit from the manufacturer and set it up for a private session.

  2. 02

    Delivery and installation

    We deliver and install throughout the Portland area, taking care of placement, connections, ventilation and system configuration ourselves.

  3. 03

    Support for as long as you own it

    We support everything we sell for as long as you own it, whether the answer comes by phone, in your home, or through factory service.

  4. 04

    A path for what comes next

    Trade-in assistance and qualifying 100% Trade-Up options give you flexibility when your listening priorities or your system change.

Search