← Back to your LP12 build

T+A Elektroakustik · Cala

T+A Elektroakustik T+A Cala CDR Streaming CD Receiver

$7,495

Signature technologies

Not currently in our rooms. For a serious buyer we will often bring a piece in from the manufacturer for a private session — tell us about your system and what you are weighing it against, and we will advise.

T+A Elektroakustik · Cala

The Cala CDR is T+A's compact streaming CD receiver: 2 × 100 W into 4 Ω, a CD drive, FM/FM-HD/DAB+ tuners, Roon Ready streaming, Bluetooth and a phono-capable analog input, with DSP bass management, in a 37 cm wide, 24.5 cm deep case.

Includes the FM1000 remote.

2 × 100 W
into 4 Ω
CD + streaming
with FM, FM-HD and DAB+
Roon Ready
plus Tidal, Qobuz, Deezer
6 kg
13.2 lb
Options and pricing

Authorized T+A Elektroakustik dealer · Delivery and installation by Pearl Audio · Trade-ins welcome

The story

The Cala CDR is the smallest complete T+A system. Behind a single black acrylic front panel with no knobs sit a CD player, a streaming client with Tidal, Qobuz, Deezer, airable internet radio, UPnP and Roon Ready, FM, FM-HD and DAB+ tuners, Bluetooth, two USB host ports, two coaxial and one optical digital input, and two analog inputs, one of which can be set as a phono stage for MM or high-output MC cartridges.

T+A keeps the entire signal path digital: the analog inputs are converted once, and a DSP then handles tone, sound fields, virtual surround and bass management with crossover points at 40, 60, 100 or 150 Hz for the subwoofer output. The amplifier is a pair of high-speed bridged switching output stages rated at 100 W per channel into 4 Ω, backed by a power supply designed to stay stable under load. Pre-out, subwoofer and headphone outputs round it off, and an LED strip in the rear panel can light the shelf beneath it.

It is the T+A for a study, kitchen or second system where everything should live in one shallow box and be run from the FM1000 remote or the T+A app. We can arrange an audition in our Portland showroom and help with system matching, delivery and setup.

T+A's AudioCon line of 1988 was one of the first consumer systems to network its components under one remote control, and the first Caruso all-in-one followed in 2008. The Cala CDR is the smallest descendant of that idea, built by a company Siegfried Amft founded in Herford in 1978 and that his son Conradin has led as CEO since 2025. Read the T+A story →

Key technologies

  • Fully digital signal path. Digital sources stay digital; analog inputs are converted once, then processed in the DSP.
  • DSP sound management. Tone, sound fields, virtual surround and subwoofer bass management at 40, 60, 100 or 150 Hz.
  • Bridged switching amplifier. High-speed output stages rated at 100 W per channel into 4 Ω.
  • Phono-capable input. One analog input switches to MM or high-output MC.
  • Roon Ready streaming. Tidal, Qobuz, Deezer, airable and UPnP over LAN or Wi-Fi.

The Symphonia is the step up from the Cala CDR; the Caruso is the all-in-one with the loudspeaker built in.

Finishes

  • Alu silver (43) front acrylic black (91)
  • Alu black (42) front acrylic black (91)
Specifications
Type Streaming CD receiver with DSP
Power output 100 W per channel into 4 Ω; distortion < 0.02 %
Disc formats CD-DA, CD-R, CD-RW, CD Text; 2 Hz – 20 kHz / 100 dB
Streaming PCM 32 – 192 kHz; MP3, AAC, OGG, FLAC, WAV, AIFF, ALAC; Tidal, Deezer, Qobuz, Roon Ready, airable internet radio, UPnP
Tuner FM/FM-HD 87.5 – 108 MHz; DAB/DAB+ Band III
Bluetooth A2DP with MP3, AAC, SBC
Digital inputs 2 × coaxial (192 kHz), 1 × optical (96 kHz), 2 × USB host
Analog inputs 2 × RCA with adjustable sensitivity; one configurable as phono MM / high-output MC or surround pass-through
Outputs Loudspeakers, pre-out, subwoofer, headphone, digital coaxial
Network Ethernet 10/100; Wi-Fi 802.11 b/g/n with WPS
Remote FM1000 included; T+A Control app
Dimensions (H × W × D) 10.5 × 37 × 24.5 cm (4.1 × 14.6 × 9.6 in)
Weight 6 kg (13.2 lb)
Finishes Case alu silver (43) or alu black (42); front acrylic black (91)

T+A Cala CDR product page and specifications

Where it sits in the range

T+A's one-box systems, least to most expensive:

  • T+A Caruso: all-in-one music system with built-in speakers
  • T+A Cala CDR (this model)
  • T+A Symphonia: 125 W into 8 Ω streaming integrated amplifier
  • T+A R 2500 R: 140 W into 8 Ω multi-source receiver

The Caruso adds built-in loudspeakers and a touchscreen; Symphonia is the step up in amplifier and converter quality.

Plan your T+A system with Pearl Audio

Pearl Audio is an authorized T+A dealer. We can arrange an audition in our Portland showroom and help with system matching, delivery and setup. Call (503) 222-2599 or email sales@pearlaudio.com.

Signature technologies

The engineering behind the T+A Elektroakustik T+A Cala CDR Streaming CD Receiver

T+A Elektroakustik gives its technologies names because each one solves a specific problem. Here is what each does, where it came from, why it matters in a system, and what you may hear.

Designed, programmed and certified in HerfordSince 2024

ASA G3: the in-house streaming architecture

T+A designs its own streaming hardware and software rather than buying a module. The third-generation Audiophile Streaming Architecture of 2024 is a quad-core board with Wi-Fi 6 and Gigabit Ethernet, native DSD streaming to DSD 256, Tidal, Spotify and Qobuz Connect, AirPlay 2 and Roon Ready, run from T+A's own MusicNavigator G3 app. Read the deep diveClose

What it does

Streaming boards are the part of a player most likely to be obsolete first, and most manufacturers buy them from one of a few suppliers. T+A keeps the whole chain in-house: design, PCB layout, certification, assembly, measurement, operating-system programming and app development. ASA G3 arrived on September 20, 2024 in the MP 2000 R G3 and MP 2500 R G3, in the MP 3100 HV G3 on October 18, 2024, and in the MP 200 G3 on November 28, 2024; Conradin Amft, then chief operating officer, described it as a core technology that the company would gradually implement in new products. The module streams DSD natively from the network for the first time in T+A's history; handles Tidal, Qobuz, Deezer, Amazon Music and HighResAudio, Tidal Connect, Spotify Connect and Qobuz Connect, AirPlay 2 and Roon Ready; and shares its control with the FM and DAB+ tuners the players also carry. The MusicNavigator G3 app is the controller; on the Caruso a seven-inch touchscreen runs T+A's own NavigatorOS instead. Owners of the earlier MP 3100 HV, MP 2000 R MK II, MP 2500 R and MP 200 can have their units upgraded to ASA G3 at the factory. The PSD 3100 HV, SDX 3100 HV, R 2500 R and Symphonia use the same module.

Why it matters in a system

A streamer that the manufacturer wrote itself is one the manufacturer can keep current, and the factory upgrade path shows what that means in practice: an MP 3100 HV bought in 2017 can be brought to the 2024 platform instead of being replaced. It also means the player, the app and the tuner behave as one product rather than as a module inside a box.

What you may hear

Stereophile on the R 2500 R: the app is the ideal interface, and the component just plays music and does it well. Killain Jones at SoundStage! found the R 2500 R effortlessly dynamic and able to produce deep, visceral bass.

Theory and application under one roofSince 1978

Designed, built and measured in Herford

Every T+A component is designed, assembled and measured at the company's own buildings in Herford, where it has been since 1988: circuit design, board layout, software, the MusicNavigator app, final assembly and a measurement protocol for every unit. Surface-mount board assembly is placed with a specialist using T+A-supplied parts; about 95 percent of production is in-house. Read the deep diveClose

What it does

T+A has occupied its own buildings in Herford since 1988 and added an administration, sales and laboratory building in 2003. A factory visit in April 2025 counted about 90 employees, 14 of them in research and development; T+A itself describes a team of fifteen designers and developers plus seven service technicians. The scope kept in-house runs from design, PCB layout and certification to assembly, measurement, operating-system programming and app development; the one step placed outside is surface-mount component placement, done by a specialist assembler using components T+A supplies, after which the boards return for final assembly and test. There are no assembly lines or automated placement machines, and nothing leaves the works without a measurement protocol. The company's own description is that it builds acoustic treasures rather than mass products, and it reports returning more than 98 percent of devices of any age to working condition when they come back for service. The engineering continuity is long: Lothar Wiemann, who joined as a student and developed the first electronics in 1982, was chief developer for 39 years before handing over to Jörg Küpper. In the United States, T+A North America in St. Marys, Georgia has handled distribution since August 2021, with service through Pyramid Audio in Austin and Audio Design and Service in Burbank.

Why it matters in a system

A product made in one place by the people who designed it can be supported for as long as its owner wants to keep it, and T+A's factory upgrades, the ASA G3 streaming boards fitted to players from 2017, are the practical form of that. It is also why a T+A system sounds consistent from the Series 200 to the HV line: the same small team designed all of it.

What you may hear

Jim Austin, in Stereophile on the MP 3100 HV: more than any other component he had had in his system, it radiated attention to detail. Michael Manousselis, who imported the brand to North America: they don't leave things to luck or to chance.

The Pearl Audio experience

How we work with you

A system at this level should be heard, thoughtfully matched, and properly set up. From the first audition to long-term ownership, you work with the same people, in person.

  1. 01

    Listen first

    The T+A Cala CDR Streaming CD Receiver is not in our rooms at present. When it is the right piece for a client we arrange a demonstration unit from the manufacturer and set it up for a private session.

  2. 02

    Delivery and installation

    We deliver and install throughout the Portland area, taking care of placement, connections, ventilation and system configuration ourselves.

  3. 03

    Support for as long as you own it

    We support everything we sell for as long as you own it, whether the answer comes by phone, in your home, or through factory service.

  4. 04

    A path for what comes next

    Trade-in assistance and qualifying 100% Trade-Up options give you flexibility when your listening priorities or your system change.

Search