Rega · Nd Series

Rega Nd9 Reference MM Cartridge

$1,045

Trade-in available

Not currently in our rooms. For a serious buyer we will often bring a piece in from the manufacturer for a private session — tell us about your system and what you are weighing it against, and we will advise.

Rega · Nd Series

Rega's best moving magnet: the Aphelion 2's boron cantilever and fine-line stylus on the Nd generator, playing close to moving-coil standard.

For Rega tonearms only.

5–6 mV
output
Boron
cantilever, fine-line nude diamond
1.75 g
tracking force
6 g
weight

Authorized Rega dealer · Delivery and installation by Pearl Audio · Trade-ins welcome

The story

For the Nd9, Rega took the cantilever and stylus from its reference Aphelion 2 moving coil and paired them with the Nd range's generator. A solid boron rod cantilever, exceptionally stiff and light, carries a fine-line nude diamond. Behind it sit an N55 neodymium magnet and miniaturized parallel coils with symmetrical geometry for accurate channel balance. The body is injection molded from glass-filled PPS with Rega's three-point fixing. Rega specifies the Nd9 for Rega tonearms only. It has an amber window and is handmade. Instead of a plug-in replacement stylus, Rega offers a rebuild scheme through your dealer.

The Ear tested the Nd9 with two reviewers. Ed Selley found it kept the drive and engagement of his Planar 10 system, with more natural tone than the Nd7 and detail that shows texture without turning analytical. Bass was controlled and articulate. Jason Kennedy heard very little coloration and fine separation of instruments in dense mixes. Both concluded it is a real alternative to a moving coil. It is easy to set up on a Rega arm and is offered factory-fitted on the Planar 8. With 5–6 mV of output, it runs from any good MM phono stage.

The Nd9 is the top of Rega's moving magnets, above the Nd7; the Ania is the first Rega moving coil. Rega cartridges have bonded cantilevers and are not retipped; when a Nd9 wears out, Rega's exchange program supplies a renewed-to-factory-spec Nd9 for $795 instead of $1,045, like for like.

Key technologies

  • Aphelion 2 stylus and cantilever. A solid boron rod cantilever and fine-line nude diamond taken from Rega's reference moving coil; amber window.
  • N55 neodymium magnet. With miniaturized parallel coils in symmetrical geometry for accurate channel balance.
  • Rega tonearms only. Rega specifies the Nd9 for its own arms, where the three-point fixing sets overhang automatically.
  • Glass-filled PPS body. Injection molded, light and very rigid, with Rega's three-point fixing so overhang sets itself on a Rega arm.
  • Handmade in England. Each Nd cartridge is assembled by hand at Rega.
  • Trade-in exchange. The cantilever is bonded, so Rega does not retip; a worn Nd9 is exchanged for a renewed-to-spec Nd9 at $795 instead of $1,045 through The Sound Organisation.
Specifications
Type Moving magnet (MM), N55 neodymium magnet
Output 5–6 mV
Recommended load 47 kΩ
Tracking force 1.75 g
Weight 6 g
Stylus Fine-line nude diamond
Cantilever Boron rod
Generator Miniaturized parallel coils
Mounting Rega three-point fixing (Rega tonearms only)
Body Glass-filled PPS, amber window
Stylus replacement Rega rebuild/exchange through your dealer
Range Nd3 (bonded elliptical), Nd5 (nude elliptical), Nd7 (fine line), Nd9

Rega Nd9 product page and specifications

Rebuilds and trade-in

Rega cartridge trade-in exchange (The Sound Organisation). Rega cartridges have bonded cantilevers and are not retipped. When a Nd9 wears out, return it through us and Rega supplies a renewed Nd9, fully tested and cosmetically perfect, for $795 instead of $1,045 (a $250 credit). The exchange is like for like.

Rega trade-in exchange — renewed Nd9 $795 (return your worn Nd9 and receive a renewed-to-factory-spec Nd9; the cantilever is bonded, so Rega exchanges rather than retips; renewed units are usually in dealer stock)
Trade in your Rega Nd9 $795 after trade-in (credit $250)

Rega's program covers the current Nd and MC range plus the legacy Exact 2 ($100 off a renewed Exact 2) and Elys 2 ($40) while renewed stock lasts. Moving between models is not part of the published program; ask us. Verified 2026-10-28. Source: Rega pricing catalogue v2025.1, October 2025 (The Sound Organisation) and soundorg.com/cartridge-exchange.

Where it sits in the range

The Rega cartridges Pearl Audio stocks, from least to most expensive:

Reviews

Plan your Rega system with Pearl Audio

Pearl Audio is an authorized Rega dealer. Ask us to fit it to your Rega turntable, or arrange an audition in our Portland showroom. Call (503) 222-2599 or email sales@pearlaudio.com.

Ownership

Rebuilds, exchange and trade-in

Rega cartridges have bonded cantilevers and are not retipped. When a Nd9 wears out, return it through us and Rega supplies a renewed Nd9, fully tested and cosmetically perfect, for $795 instead of $1,045 (a $250 credit). The exchange is like for like.

Rega cartridge trade-in exchange (The Sound Organisation)

Trade-in credit
—
Your price after trade-in
$1,045

Eligible: a worn or damaged Nd9 (like-for-like exchange). Rega's program covers the current Nd and MC range plus the legacy Exact 2 ($100 off a renewed Exact 2) and Elys 2 ($40) while renewed stock lasts. Moving between models is not part of the published program; ask us. Verified 2026-10-28.

Ask us about this trade-in

Factory rebuild and retip

ServicePrice
Rega trade-in exchange — renewed Nd9return your worn Nd9 and receive a renewed-to-factory-spec Nd9; the cantilever is bonded, so Rega exchanges rather than retipsTurnaround renewed units are usually in dealer stock $795

Pricing per Rega - 2025-Fall - Price Sheet (The Sound Organisation, October 2025) and soundorg.com/cartridge-exchange/. Programs are set by the manufacturer and may change.

The Pearl Audio experience

How we work with you

A system at this level should be heard, thoughtfully matched, and properly set up. From the first audition to long-term ownership, you work with the same people, in person.

  1. 01

    Listen first

    The Nd9 Reference MM Cartridge is not in our rooms at present. When it is the right piece for a client we arrange a demonstration unit from the manufacturer and set it up for a private session.

  2. 02

    Delivery and installation

    We deliver and install throughout the Portland area, taking care of placement, connections, ventilation and system configuration ourselves.

  3. 03

    Support for as long as you own it

    We support everything we sell for as long as you own it, whether the answer comes by phone, in your home, or through factory service.

  4. 04

    A path for what comes next

    Trade-in assistance and qualifying 100% Trade-Up options give you flexibility when your listening priorities or your system change.

Search