How Magico tests a loudspeaker

Magico · Hayward, California

At Magico's plant in Hayward, a new loudspeaker is measured long before anyone sits down to listen to it. Two instruments do most of that work, and a third checks every loudspeaker that leaves the building.

Mapping the sound

The Klippel Near Field Scanner is a robot that carries a microphone up, down and all the way around a loudspeaker, measuring it over a full sphere. Yair Tammam, Magico's chief technical officer, describes it as doing automatically what once took many measurements by hand.

From that data Magico calculates how the loudspeaker will behave in a real room, reflections included. The result is weighed for smoothness as well as extension, because research shows that listeners are more sensitive to an uneven response than to a gentle tilt. Work that took months now takes days.

Watching the cabinet

The Polytec laser vibrometer looks at the enclosure, not the sound. A laser lays a grid of several hundred points across each side of the cabinet while noise plays through the drivers, and the instrument records how much each point moves.

The engineers can see where a panel is vibrating, add bracing or damping exactly there, and measure again to confirm that it worked. Founder Alon Wolf says the enclosure of the S7 was brought down to the level of several M Series models this way.

Still listening

Tammam is clear that the instruments are tools and that the result is still judged by ear. What changes is how close a design is when it is first heard. By Wolf's estimate the loudspeaker is nearly finished by then, where it once took many rounds of building, measuring and listening.

Every driver, every loudspeaker

Development and production are tested separately. At a dedicated station, each drive unit is checked before it is fitted and each finished loudspeaker before it ships, against a stored reference, on ten to thirteen measurements. A second microphone in the ceiling cancels the noise of the room. A loudspeaker passes or it does not.

Made in the same building

The parts being measured are made a few steps away. Magico machines its enclosures in its own shop: lead machinist Andy Green describes a faceplate that begins as a block of aluminum weighing about 450 pounds, is cut inside and out over five or six hours, and then takes about a shift and a half to finish before polishing and paint. Crossovers are assembled complete on their boards before they go into a cabinet.

More on the materials and methods is in Magico technology.

Magico at Pearl Audio

Pearl Audio is an authorized Magico dealer in Portland. Call (503) 222-2599 or email sales@pearlaudio.com.

Source: "A Visit to Magico," The Absolute Sound, December 2026, with statements from Alon Wolf, Yair Tammam and Andy Green of Magico.

Search