(503) 222-25991038 NW Johnson St, Portland · Mon–Sat 10–5:30
Harbeth technology
The engineering behind Harbeth
Harbeth gives its technologies names because each one solves a specific problem. Here is what each does, where it came from, why it matters in a system, and what you may hear.
HarbethDrive units
The RADIAL cone
Harbeth's own cone material for its bass and midrange drivers, developed in a research project that began in 1990.Read the deep diveClose
Harbeth began with the polypropylene cone, which its founder patented after his BBC research. In 1990 Alan Shaw set out to better it, with government funding and a university partner. Some fifty materials were tested. The result, RADIAL, is injection-molded, which costs far more to tool, and gives a clearer midrange. Harbeth makes these drivers itself.
HarbethCabinet
The thin-walled cabinet
Thin, damped panels in the BBC manner, in place of thick, heavy walls.Read the deep diveClose
A heavy cabinet stores energy and lets it go slowly. BBC practice, which Harbeth has kept, is to use thin panels, each damped and tuned so that what little energy it holds is released low in level and away from the midrange, where voices live.
HarbethManufacture
Built and matched in Lindfield
Every Harbeth is built to order in Lindfield, West Sussex, with its drivers matched in pairs and the finished loudspeaker measured.Read the deep diveClose
About a hundred parts go into each loudspeaker, assembled by hand. Every drive unit and crossover is tested, drivers are matched in pairs, and each loudspeaker is measured before it is packed. The factory keeps a record for each one: its drivers and crossover, its veneer, and who built it.