Streaming brings the whole network into the audio system, and with it the high-frequency noise of routers, switches, power-line adapters and the house wiring. Computer Audio Design's Ethernet Control is a small in-line device that sits at the end of the network cable. Inside are proprietary CAD transformers that galvanically isolate the connection and, CAD says, reduce noise across a wider frequency range than the standard Ethernet transformers built into network equipment, together with the noise-absorbing materials used in the Ground Controls and USB Control. It reduces noise on the differential data pairs, on the signal ground and on the Ethernet interface of the device it is plugged into.
The gold-plated RJ45 plug is attached directly to the body, which CAD chose over a flying lead to keep impedance low, and the network cable goes into the socket on the other side. The usual place for it is where the Ethernet cable enters the audio system, at the streamer, server or network DAC; CAD and its customers also report good results at the switch or router, and two units at different points can give a further improvement. The acrylic case is hand-made and each unit is tested in the UK.
The Ethernet Control won hi-fi+ Best Network Filter of 2024, and reviews from The Ear, GY8 and Pursuit Perfect System in 2024 compared it directly against other Ethernet filters. Isabel Whitley of CAD reports that it is bought most often by dCS owners alongside the GC3.1 and USB Control, and it is the CAD product Pearl Audio would suggest first for any streaming front end.