← Back to your LP12 build

Aurender · Master Clock

Aurender MC10 Reference Master Clock

$18,500

The Aurender story

Not currently in our rooms. For a serious buyer we will often bring a piece in from the manufacturer for a private session — tell us about your system and what you are weighing it against, and we will advise.

Aurender · Master Clock

The MC10 is a rubidium 10 MHz master clock with four outputs, two at 75 Ω and two at 50 Ω, built on the MC20's rubidium module, power supply and vibration control without the word clock section.

Rubidium
10 MHz atomic reference
4 outputs
2 × 75 Ω, 2 × 50 Ω
< –140 dBc/Hz
phase noise at 100 Hz
12.9 kg
28.4 lb

Authorized Aurender dealer · Advice and support from Pearl Audio · Trade-ins welcome

The story

A rubidium oscillator is an atomic reference: its frequency is disciplined by a resonance in rubidium vapor, which gives it long-term stability that no crystal can match. The MC10 puts that module, with the power supply structure and vibration mitigation Aurender developed for the MC20, in a 87 mm chassis and offers its 10 MHz on four outputs, two at 75 Ω and two at 50 Ω, each at 0.7 Vrms. Short-term stability is specified at 2 × 10⁻¹¹ over one second, and phase noise below –130 dBc/Hz at 10 Hz and –140 dBc/Hz at 100 Hz.

What the MC10 leaves out is the MC20's pair of OCXO word clock generators, which only a few DACs can use. If your DAC, server or hub has a 10 MHz input, the MC10 gives it the same reference as the flagship. Aurender names the N20, N30SA, AP20 and its own NH10 as compatible sources, and DACs or clocks from Esoteric, CH Precision and dCS among others.

The MC10 is the way to put an N20 or N30SA and a 10 MHz-capable DAC on one atomic reference. It needs a few minutes to warm up and lock. We can arrange an audition in our Portland showroom, help you choose storage and a DAC, and set the Conductor app up with your music library.

Key technologies

  • Rubidium 10 MHz module. Atomic frequency reference with very low phase noise and jitter.
  • Four 10 MHz outputs. Two 75 Ω and two 50 Ω BNC outputs, 0.7 Vrms.
  • MC20 core design. Same rubidium module, power supply structure and vibration mitigation as the flagship.
  • Broad compatibility. Any component with a 10 MHz input: Aurender servers and hub, DACs and clocks from other makers.

Finishes

  • Silver machined aluminum
  • Black machined aluminum
Specifications
Type Rubidium 10 MHz master clock
Outputs 10 MHz: 2 × 75 Ω, 2 × 50 Ω BNC, 0.7 Vrms ±10 %
Phase noise < –130 dBc/Hz at 10 Hz; < –140 dBc/Hz at 100 Hz
Short-term stability < 2 × 10⁻¹¹ (1 s); < 1 × 10⁻¹¹ (10 s); < 2 × 10⁻¹² (100 s)
Power supply 110 / 220 V; standby 5.7 W; warm-up 95 W max.; locked 30 W max.
Dimensions 430 × 87 × 370 mm (16.9 × 3.4 × 14.6 in), W × H × D
Weight 12.9 kg (28.4 lb)
Finishes Silver or black

Aurender MC10 product page and specifications

Where it sits in the range

Aurender's clocks and network products:

  • Aurender NH10: OCXO-clocked network hub with optical SFP ports
  • Aurender MC10 (this model)
  • Aurender MC20: rubidium 10 MHz plus dual OCXO word clocks

The MC20 adds two OCXO word clock channels for DACs that need word clock rather than 10 MHz.

Plan your Aurender system with Pearl Audio

Pearl Audio is an authorized Aurender dealer. We can arrange an audition in our Portland showroom, help you choose storage and a DAC, and set the Conductor app up with your music library. Call (503) 222-2599 or email sales@pearlaudio.com.

The Aurender story

Dedicated music servers and network players from South Korea, since 2011.

Founded 2011 in Seongnam, South Korea by Widealab, today part of TVLogic · aurender.com

Milestones

  1. 2011 The first Aurender Widealab launches the Aurender music servers, the S10 among them, with solid-state playback and control from an iPad.
Read the Aurender story

Aurender began in South Korea at the start of the computer audio era. In 2011 a young engineering company, Widealab, launched the first Aurender music servers, the S10 among them: dedicated machines that archived a music collection, played it back from a solid-state drive and were controlled from an iPad.

The idea was to take the general-purpose computer out of the listening room. A computer is busy and electrically noisy, and music played from one inherits both. An Aurender does one job, with its storage, power supplies and outputs designed for audio.

Aurender later became part of TVLogic, a Korean maker of video monitors, and the range grew in two directions: A-series players with a DAC built in, and N-series transports for a separate DAC. The N50 carries the idea furthest, with the computer, the audio outputs and the power supplies each in a chassis of its own.

Aurender builds its products in South Korea, and every model is run from the company's own Conductor app.

The complete Aurender story and technology library

Aurender at Pearl Audio

We have carried Aurender for more than five years. It is not the largest line in our store, but in its field we consider it among the best, and it is what we suggest when a client wants a library and streaming in one dedicated component.

The Pearl Audio experience

How we work with you

A system at this level should be heard, thoughtfully matched, and properly set up. From the first audition to long-term ownership, you work with the same people, in person.

  1. 01

    Listen first

    The MC10 Reference Master Clock is not in our rooms at present. When it is the right piece for a client we arrange a demonstration unit from the manufacturer and set it up for a private session.

  2. 02

    Placement and setup advice

    Ask us about placement, connections, ventilation and system configuration, and about delivery.

  3. 03

    Support for as long as you own it

    We support everything we sell for as long as you own it, whether the answer comes by phone, in the shop, or through factory service.

  4. 04

    A path for what comes next

    Trade-in assistance and qualifying 100% Trade-Up options give you flexibility when your listening priorities or your system change.

Search